Ipod restarts when I try to alter the volume
If I've been listening to something on the ipod for more than a few minutes and then try to alter the volume, the ipod will restart itself (screen goes black then Apple logo appears, all takes about 20 seconds which is rather annoying). Any ideas as to how to stop this happening? I have tried restoring the ipod but doesn't seem to have done the trick.
Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.
Similar Messages
-
i have an iPad 2 and the volume icon is in the middle of my screen and when i try to turn the volume down it just goes back up again and it makes it impossible for me to play games or do anything
Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.
-
My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
I have the volume control symbol in the enter of my iPad all of the time. My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level. Thanks
Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.
-
When I try to alter the fill on a button symbol it crashes FW. Ideas?
This happens after I've created a file, closed it, then reopened it, and try to alter the original button symbol. I click on the fill icon, and wham! Down goes Fireworks. I end up having to recreate the button and replacing what I've done previously.
I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync! -
I submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it. The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
I have erased all information and started over as a new iPod Touch but the problem persists.
I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
Thank You for your conciderationI submitted my question but ran out of room in the box. I can still down load new Apps to my iPod touch AND update them but CAN NOT update the older Apps. that was on the iPod before the problem.
I have been to Three Apple Service Center stores - In Tulsa OK, Oklahoma City OK, Tacoma WA and NO ONE could tell me what is the problem OR what to do to correct it. The Tech then tells me to get hold of the main Apple Service Center number. I tell them I already have and they still recommend going to them.
I have erased all information and started over as a new iPod Touch but the problem persists.
I have called the Apple Service number and they tell me to do everything that the the Tech's at the Apple Service center stores tried to do but DID NOT work.
After I spend a lot of time on the phone, I get told to make an appointment at a Apple Service center store so they can physically have hands on assistance. Come on folks I have already done that and they were of no help. When I say that, I get told that may be the only way I can get the problem resolved.
Surely there is someone out there that knows something about what is happening OR not happening with my iPod and provide a solution.
Thank You for your concideration -
O wn 2 iPod nanos series 4 and series 6 I want to sync different music on each iPod but I get the message when trying to sync the series 4 that there is too much data for the sync to take place. It seems both iPods have the same name, so I guess I have to rename one, how do I do this?
Or is there another solution
Any help appreiated
Wighill 13It would be useful to you if they had a different name, but the computer knows they are different. Create separate sync playlists for each device and go to the Music tab when it is connected and specify which playlist should be used for the sync.
-
I need to kno how to fix this problem
Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod -
What can I do about my iPhone 4s speaker not working
That didn't work.... Thanks tho. When I press the side button it doesnt show me the little bars indicating the volume
-
I have been able to change ringer volume by the settings, but it doesn't adjust the media or music volume at all.
Hi Jennifer,
Thanks for visiting Apple Support Communities.
I'd suggest trying the steps in our iPad assistant first:
https://www.apple.com/support/ipad/assistant/ipad/
Regards,
Jeremy -
Help
Hello Michaelonesixthree,
The following article provides troubleshooting steps that can help restore functionality to your iPhone's speaker.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
Problem when I try to download the IOS4 for my iPod Touch 2G
Hello guys!
I am from Bella Vista, Buenos Aires, Argentina and I have the following problem:
I have an iPod Touch 2G, I installed the lastestversion of iTunes and every time i connect my device to my pc via usb, iTunes opens and a window apears telling to me that I can update it to IOS 4.0. I clic on Only Download (I want to download the new firmware and update later).
The download starts correctly, but in the middle of the download a error message appears. The window says that a problem occurred with the download, try again later. Error number: 9006 (Unknown).
Questions:
a)- if this error occurs in the middle of the download... Why does not iTunes prompt me an option to continue the current download when I try to do it the next time? (I have to start a new download again when I try to download the firmware again. The firmware size is 300 mb. The error window only shows me an OK button and the transfer is interrupted. When I try to download the firmware again, the download should continue from the part where was interrupted, no start all again. Apple should fix this issue). I have to tell you that I tried several times downloading the firmware and I always got this error window and I really HATE it. Please, gime me a solution for my problem and try to fix the issue that I showed above. (When I'm downloading a firmware version from iTunes and the download is interrupted by a "X" problem or error, when I try to download it again, the download should continue from the part where it was interrupted, no start all again). I will be hoping for a good solution. Thanks and I have to tell you that you manufacture very amazing products. Ipod Touch, one of my favourite Apple's products. My big dream: I want to have an iPhone 4Well!
We have to protest for it.
If an error occurs with the download and we want to try again, the download MUST continue from the part where was interrupted, no start all again. We have to protest for it. Please, Apple Inc, try to fix it. It's very easy to do. If I am downloading a firmware version from iTunes and an error occurs with the download , you should put a button that reads "Continue the download from the interrupted part", no only a "OK" button that finishes the download and I have to start all again when I want to retry. Solve it, please. -
Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.
Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.
-
I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?
See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock -
I bought an iPod nano and Itunes does recognize the iPod but when I try to sync it will not let me. What now?
How do you know it will not let you? Are you getting an error message? What is the error message?
Maybe you are looking for
-
How to provide the user with a list of files to pick from...for downloading
hai.. I have uploaded the file succesfully.. now we need to download the file...... which has been uploaded..... for that we have implemnted the Query as.. select max(id) from APEX_APPLICATION_FILES ,here the latest uploaded record will be retrieved
-
Hello friends, Can somebody tell me what are the mandatory fields to be filled in this transaction code? please clarify my doubt regards, Sekhar_functional consultant
-
When i try to deep copy EHHSS_INC_REC_OIF_V3 component in EHSM. It gives error "Source configuration EHHSS_INC_REC_OIF_ADD_FINTR_LST does not exist". Secondly, how to create custom tabs in EHSM screen. Could anyone please help me regarding this.
-
FB game not working in Firefox but works in AOL browser, solution needed please!
The game is WORDS WITH FRIENDS.
-
Trying to find pros and cons for Applet and JavaScript. Anyone know any or a good place to look? Thanks