Ipod restores after syncing

I have a beloved Ipod Classic.  I recently installed a new computer, and brought over my itunes files to that computer. When I connected my Ipod to sync the music onto it, it said I needed to restore the Ipod, then the circle of **** began.
Now, when I plug in my ipod, I sync it, and when I click to eject, the ipod gets frozen on the "Okay to Disconnect" screen, then restarts itself after a minute, with no music on it. I then tried to click restore again, the Ipod restores, then Itunes says "Itunes has detected an Ipod in Recovery Mode. You must restore this Ipod before it can be used with Itunes". I restore, and the same thing happens!
Please help! I brought this to apple yesterday, and they barely looked at it and just offered me to fix it for $130!

If the On This iPod tab shows a list of songs, then they are being synced to the iPod.  Not being able to play them there (from that tab in iTunes) is normal, if you use automatic syncing. The list is probably grayed out.
I'm not sure why the songs to not appear when the iPod is being used.
Try this test.  Do a Restore again.  If it asks if you want to sync your library to the iPod during thre Restore process, decline doing so.  Also, show the iTunes sidebar, so that iTunes operates like it did before this version.  From the menu bar, under View, select Show Sidebar.  You can change that back later.
Select the iPod in the sidebar, under DEVICES.  On the Summary tab, check the box for Manually manage music and videos, if it is not already.  Apply this change, if needed.
In the sidebar, "drop down" the iPod's content list and select Music there.  To the right, is the list of songs on the iPod, which should be empty at the moment.  NOTE:  This is equivalent to the "On This iPod" tab.
Go to the iTunes Music library in the sidebar.  Using the manual method to load the iPod, drag a small number of songs from the Music library to the iPod.  When you go back to Music under the iPod, you should see those songs on the iPod's Music list.  The list should no longer be grayed out, although you still may not be able to play the songs from there (in iTunes).
Now, try the things that did not work before...  Eject and disconnect the iPod, and see if those songs appear on the iPod and are playable.

Similar Messages

  • TS1425 I cannot eject my ipod classic after sync with i-tunes on my pc. It states some of the files are being used by other applications. What does this mean? How can I get it to eject?

    I cannot eject my new ipod classic after sync with i-tunes on my pc due, it states, to open files being used by another application. What does this mean? How can I get my ipod to eject?

    If it's a one-time "glitch," you can try restarting your computer with the iPod still connected.  Try ejecting again after the restart.
    If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage.  When connected, the iPod's "disk" is like other mounted volumes.  This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
    If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk.

  • IPod locks after sync

    I am at the end of my rope! I have an 80 gig iPod classic synced to my MacBook. When I sync, at the end, the little round thing in the upper left stops turning and it freezes. If I leave it the freeze lasts for 30-45 minutes. When I reset it, it takes 30 minutes to get up and running again.
    So far, I have exchanged the iPod 4 times. On each one I restored to factory settings, used disk utility, restored, etc. After the second exchange, I figured it was my MacBook, not the iPod, so trashed iTunes and re-loaded it, and I did an archive and re-install of both Panther and Leopard (once I switched). Eventually, my iPod would no longer update at all, which is why I exchanged it again...and again.
    I just synced my newest iPod for the first time and it froze after sync again!!
    Does anyone else have this problem? I have a 2nd generation iPod 10 gig and a 4th generation iPod 40 gig (that I gave to the kids as I upgraded) and they both sync fine.
    Suggestions????

    seems your iPod 10G and 40G working fine, but not 80G - it makes me feel that it is either a problem of 80G or there are some corrupted files on your iTunes library e.g. movies

  • How do i switch back to my ipod info after syncing with someone elses?

    I plugged my Ipod into my sisters computer to download her Itune music onto mine.  Now my ipod has all her info on it.  Its like mine syned up to hers and all my info is gone.  I still have my aps but it wont let me use them and my email info is her email info so i cant check emails.  How do I get back to my ipod info?

    One you syncing computer, go to iTunes>Preverences>Devices and check the box that says "Prevent iPods...syncing". Then connect the iPod to the computer and restore from backu.
    See:
    iTunes: Backing up, updating, and restoring iOS software

  • ITunes will wipe my iPod classic after sync

    I have an 8th Generation iPod classic 160gb. I have recently had the problem of when I would attempt to sync my iPod, it would sync most of the music, but then would throw error (-50) or error (-69). Upon resyncing my iPod, it would give the same error, but this time it would completely wipe my iPod, and force me to restore it.
    I have restored it multiple times, I have reinstalled itunes (11.0.2.26), and still have the problem.
    I have also run the diagnostics (hard reset iPod then hold the select button and the << button) and it has given me the following for HDSMARTDATA:
    Retracts: 11
    Reallocs: 13976
    Pending Sectors: 2400
    PowerOn hours: 254
    Start/Stops: 17457
    Temp: Current 35c
    Temp: Min 66c
    Temp: Max 255c
    I have also taken my iPod to my local Apple Store, and they were unable to do anything besides restore the iPod, which I have already done on multiple occasions.
    Does anyone have further insight into what is going on?

    Those 2,400 pending reallocations are a bad sign. Add that to 13,976 sectors that have already been reallocated, and the corrupt thermal data, and I think it is safe to say your classic is toast.
    See Corrupt iPod classic for more information.
    tt2

  • Ipod freezes after sync

    My Ipod freezes after every sync. I am forced to reboot it. Has anyone seen this? How do I fix it?

    I took to my local Apple location and they just replaced it.

  • IPod locked after sync

    iPod locked up after sync; small padlock in upper left corner; how do I unlock?

    Is the lock switch still engaged on your iPod?  See this article for more details.
    http://support.apple.com/kb/ht2053?viewlocale=en_us
    B-rock

  • Cannot view nano ipod stats after sync.

    How can I view nano ipod in itunes after sync?  It goes right to eject.

    If it's a one-time "glitch," you can try restarting your computer with the iPod still connected.  Try ejecting again after the restart.
    If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage.  When connected, the iPod's "disk" is like other mounted volumes.  This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
    If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk.

  • Ipod blank after sync

    Hi
    I had my 30G ipod on pc now i am on a macbook pro. I went to disk util and erase my ipod. now when i sync with my itunes on my macbook pro, it seem to transfer all my songs to my ipod, but when i go to play back my ipod it is blank. Iam i missing somthig?

    Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes

  • IPod disconnects after sync

    My iPod keeps disconnecting after it syncs. I connect it to my iMac; it syncs; and then the icon on the desk top disappears. It is, however, still in the iTunes menu under devices. The reason this is a problem, is when I connect my iPod to use it with Backup (I use my iPod as a external hard-drive for personnel settings back-ups and such) it first syncs with iTunes and then disappears where as before it would be found by backup and start. I did just recently restore my iPod as a test to another problem I am having. My iPod won't charge on my HiFi. It charges on my computer and on my wall charger but it won't charge on the HiFi. I tested it on other HiFi's and it does the same thing, so it is not the HiFi. Besides, my wifes Nano works fine on the HiFi. Any help you can offer?

    That's how it's supposed to work.
    When auto sync is finished it dismounts.
    If you wan to stay connected, select the iPod in iTunes, then tick Enable Disk use.
    You will have to Eject the iPod when you are thru.

  • IPod restarts after sync

    I noticed my iPod sometimes restarts after a sync is completed. This doesn't happen all the time and update 1.0.1 doesn't seem to resolve this. Does anyone else have this "problem" or can someone explain why this happens?

    Solution? Use firewire. $20 extra is lame (not very much, mind you) but now I don't have to send it in, and the uploads are a tiny bit faster. As I type, I'm 650 of 1300 songs in, without a hickup. Last night, it'd crash after 10. I'll be posting this in a few threads - I apologize if you're reading them all!

  • IPods remounting after sync

    Hello All,
    I have 2 5.5 gen 30gig iPods. They both sync fine and are not set to enable disk use.
    When they are both plugged in and after having successfully sync'd, they dismount (as expected). A few minutes later, they both remount as external disks.
    Observations:
    - It seems this only happens when they are both plugged in.
    - Doing a manual sync will sync the iPod, then dismount it (only to have it remount a few minutes later)
    iTunes is version 7.5.2, OS X 10.4.11, iPod software is 1.2.2 (on both)
    It's not a huge deal, it's just inconvenient. Does anybody have any ideas how to change this behavior?
    Thanks,
    Ben

    Using your wife's account, have you tried not syncing any photos? For a lot of us, it's the photo syncing that causes a -50 error. This is, apparently, caused by music in the slideshows that get synced.
    Currently, until Apple fixes this (again, by the way...it broke some time ago, Apple fixed it with an update...now it's broken again), you have a couple of options (assuming it's photos that are causing this issue):
    1. Don't sync photos to the nano.
    2. Disable music in any of your slideshows via the slideshow setting for each one.
    I don't have a nano, but can verify this issue occurs on both my iPhone and IPod Classic.

  • IPod resets after syncing?

    About every second or third time I sync my iPod Classic (120GB), after the white progress bar goes across the screen, the iPod resets itself. Why does it do this? Is this an iTunes problem? I've never seen my old 5G iPod do this before.

    No, after you sync an iPod then disconnect, it reverts to the main menu.

  • Restore after sync is missing messages

    In order to desimlock my iPhone 4, my operator instructed me to use iTunes to perform a restore of the iPhone (choosing the option to backup before actually performing the restore). Before requesting the restore, I had synced my iPhone once over Wifi to iCloud, then changed the settings in iTunes to "Back up to this computer" and synced again. I deactivated "Synce with this iPhone of Wi-Fi" and connected my phone to the USB cable and synced a third time, just to be obssessive.
    In spite of all this, after performing the restore procedure (during which I also requested a backup when prompted), my phone appears to have none of the many SMSs and iMessages sent over the five-hour period preceding the restore, whereas these syncs all took place within the final 30 minutes before the restore. For now, I have found no additional data missing. This is however worrisome to me, as I would expect a restore following a syncronization to restore the latest data, down to the minute when then the most recent sync began.
    Any similar experiences or explanations for this or how I might prevent it happening again?
    Thanks in advance.
    Patterson

    Photos in your iPhone's camera roll should be imported by your computer as with any other digital camera. Although photos in the camera roll are included with your iPhone's backup, so is quite a bit of other data, so it isn't a good idea to depend on your iPhone's backup alone for these photos.
    With XP, you can use the camera and scanner wizard.
    Did you restore your 3G with iTunes as a new iPhone or not from the iPhone's backup? If not and these photos are still available in the camera roll on the 3G, you can import the photos.
    If you restored your 3G as a new iPhone - the photos are no longer available in the camera roll, you can try using a 3rd party utility like this one to see if all photos are available with the backup for your 3G.
    http://homepage.mac.com/vaughn/msync/

  • Ipod erased after sync

    after disconnecting from mac, ipod was erased. 

    from my experience, the music is still there. the database is screwed up when itunes recognizes the music, but the ipod doesnt see it.
    what ive discovered, after the database crashes and everything is gone, see if you can find this info out. anytime ive had this issue, there are normally a few songs that wont copy over and itunes says "could not convert"(i have itunes setup to convert songs of high bitrate to aac 128kbps). when i go to delete those songs(because they show up on the ipod, but are greyed out), thats when the database crashes, and everything vanishes.
    my fix for this issue is this:
    unplug ipod from computer and turn off
    close itunes
    restart ipod
    open itunes
    plug in ipod
    sync ipod with itunes
    copy over one or two of failed songs
    watch itunes start to sync, sit at "waiting for changes to be applied" for a few minutes
    watch all my missing music reappear(over the course of about 10 hours, takes a few minutes to recopy 4000 songs)
    annoying and frustrating, but until apple can recognize this issue and put a fix in, this is the best solution i can think of besides throwing my ipod at the wall and fix the solution permanently. but that wont get me very far because of my lifeproof case.

Maybe you are looking for

  • MXI not visible in MAX

    I have installed the MXI Express x1 kit in my PXI 1050. The computer doesn't boot. I disconnect the cable from the PXI rack and the PC boots. Looking through the forum I find a common thread about the MXI killing the PC boot. But I am not finding the

  • W32TM reverting to old settings.

    Hi all, I have an issue which is driving me crazy and thought I would reach out to the experts. I am trying to update the time sources on a few servers running 2008 SP2, however it continually reverts back. Scenario - Windows Server 2008 SP2 - Not jo

  • What bios and where are they

      i have a K8T NeoFIS2R mother board and updated the bios by live update now its set the mem timing to cl 2 they wont run stable at 2 i reset in bios to 2.5 and when pc boots it still says 2 but in bios it says 2.5 ive read in the forum using live up

  • Click on chart values to get details

    Hi, We have a requirement where we need to click on chart series and get details for same, e.g if there are different employee groups showing totals in a graph, we need to be able to click on the total in chart and get detail for same. Regards

  • Language of purchased software

    I'm dutch, and when I log in to the app store I can only browse the dutch store. I want to buy Apple Pages/Numbers, but I don't want the dutch version. Can I change the language of the software after purchasing? Please note I'm not talking about spel