IPod rests playlist when recharged with usb cable

Hi,
When I recharge my 160 Gb Classic by plugging it into my PC with the USB cable, it resets the playlist position to the beginning. I have nearly 4000 songs, but I can only listen to around 300 of them before needing to recharge. It doesn't matter whether iTunes is running or not. I normally listen in shuffle mode, but I tested it with shuffle mode off, and it does not remember its place that way, either.
Is there some way to make the iPod remember it's position in the playlist through a recharge?
Thanks for any help you can offer.
-- Jue

I have to say I have the same exact problem. It may sometimes be solved by putting the ipod into Disk mode before plugging it or by changing the ipod drive letter. In my case nothing have worked though, so if anyone has other ideas please tell me.

Similar Messages

Network adaters -BlackBerry Device not working in windows 8 when coinnected with usb cable

I was unable to find my plabook in the network or any mounted volume when I connect w8x64 pro to the playbook via usb cable despite the blackberry device manager is loaded on connection
in devce mgmt I found
Device Type: Network Adapters
Manufacturer: Research In Motion
location: 0000.001d.0007.005.000.000.000.000.000
Device Status:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
------------------- Events Tab--------::
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_c255bed1a35b762a\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver Management concluded the process to install driver rimpb_rndis.inf_amd64_e3f4ab2c803293ee\rimpb_rndis.inf for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0x0.
Driver Management has concluded the process to add Service usb_rndisx for Device Instance ID USB\VID_0FCA&PID_8012&MI_00\6&1EDEAF40&0&0000 with the following status: 0.
Driver version: 2.0.0.32
Itried to update the device but it's up to date
what Can I do?

hi Suman Shrestha,
Welcome to the Lenovo Forums.
Your issue might be similar to this thread.
Although this is for a Windows 7 machine, can you try the solution that was posted and see if the problem gets fixed.
Let me know your findings
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How can I stop iTunes from dropping my iPhone 5 when connected with USB cable? It sees it and start a backup and then it drops and tells me cannot find phone.

My HP notebook 64 bit Windows 8 after the last iTunes update will detect my iPhone 5, sync and when finished with thy sync I start a backup to my computer. It runs fine for a bit and then gives me message I have changed settings on my iPhone 5 and asked me if I want to update. I OK the question and runs a bit more and then drops the connection telling me cant find my iPhone 5. I can restart iTunes and start over and does the same thing.
ITunes update 11.1.1.62 had difficulties with the updates on 64 bit Windows 7 and 8.1 causing an error on boot other trouble. I found solution on research that insturcted to Remove iTunes, Bonjour, Apple Support and Apple Update and reload iTunes old version. I simply reloaded the new version becasue did not have the old version of iTunes. I have been working fine with the old version. I know problem is a simple setting somewhere but it is NOT SIMPLE to me since I dont know where the find the simple setting.
Will someone tell what to do. I appreciate all you smart guys.

My apologies...the version is 11.1.4.62 not as stated aboive in my problem description. I'm trying again and it just finished syncing fine and my iPhone 5 is still connected to iTuns physcially with USB lightening cable and is displaying the iPhone icon top right. I clicked on it and iTunes is now "hung' or locked up. Shows to be an active running application but can't get back to it so willl have to kill with task manager. There is some kind of problem going on with the latest version of iTunes and Wndows 7 and 8.1 or something. My iPhone 5 now has a new feature that it is now asking me if I "Trust" this computer. iTunes just came "unhung" after several minutes while I was typing this. Now I am going to start the backup to this computer HP Winsows 8.1 and iTune 11.1.4.62 and see what happens. Says it is Backing up Jerrys iPhone but the Barber Pole progress bar is not turning an iTunes is hung again and I cant get back to it from this page I am typing on. Maybe it will eventually release as it did a moment ago.

I pod not recognised when used with usb cable

I have recentley bought a new computer, which has no firewire port ( which i had used to connect my ipod classic 40gbto my old computer without any issues. However I have purchased a usb connection cable to use with the new computer and neither windows or I tunes will recognise that i connect my ipod. I simply get a message saying usb device malfunctioned,windows does not recognise it. Although the ipod will still connect to my old computer with the firewirecable it will not connect with the usb either, any help would be greatly recieved as I have tried resetting and disk mode to no avail.

I have to say I have the same exact problem. It may sometimes be solved by putting the ipod into Disk mode before plugging it or by changing the ipod drive letter. In my case nothing have worked though, so if anyone has other ideas please tell me.

HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day!

TS1369 My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What's wrong?

My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?

Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

Solution may be found if you search in the "More Like This" section over in the right column.

Using AC adapter to charge is better than charge it with USB cable?

I've been reading this on http://www.ipodbatteryfaq.com/
"When possible, always use the AC adapter (or vehicle adapter) for extended charging, not a FireWire cable attached to a computer."
The artical does not explain why, but I'm curious about it.
So, does charging iPod with USB cable really damage the battery?
Is it always better to charge iPod with AC adapter?
Any answer will be appreciated, thanks in advance anyway

Even if you use an a/c adaptor you still need the usb cable to connect it to the iPod. The very same cable you use to connect to the computer.
A firewire cable is something completely different, and although the 5th gen iPod will charge via a firewire cable they are not supplied with the iPod (because the iPod won't accept data transfer via firewire).
When reading about the iPod battery, you should remember that there is an awful lot of nonsense said. I've never found any difference whatsoever either charging via a mains adaptor or via a computer.

Get "using too much power" message when charging with USB

I have a 4th gens iPod Touch that appears to have a number of issues:
1. get "using too much power" message when charging with USB
2. can't re-boot
3. unable to access iCloud Backup, Ignore and Settings button inactive
4. unable to unlock unit when using the Home button to turn the unit on

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Will the iPad Mini print to / scan from the HP 7280; with USB cable?

Will the iPad Mini print to / scan from the HP 7280; with USB CABLE?
Thanks, everyone...
---sue h (Apple novice)
iPad Mini

https://itunes.apple.com/us/app/genius-scan-pdf-scanner/id377672876?mt=8
I use this app. It takes a photo and turns it into a PDF (the photo that you take with your iPad/iPod)

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Have tried to restore iPod twice but still showing only USB cable to be connect to iTunes..

I have download and update iPod touch (4th generation) running firmware version 4.2.1 to iOS 5 or later through iTunes 11.1.5.5 so i have tried to restore iPod twice but still showing only USB cable to be connect to iTunes. Nothing is happening. so please tell me how to resolve it.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...
Also see your other post > After updating iOS iPod is showing only iTunes log with USB Cable..

Will not recognize the Lucid LG when connected with USB

My Dell will not recognize the Lucid LG when connected with USB. Both the computer and phone gives a split second prompt that they are connected but then goes away immediately. After reconnecting it several times however it will finally recognize the mass storage. How can I get away from the hassle of multiple re-connections before it finally recognizes that connection?

That's some helpful information about your issue samrmusso! Some recommendations that I have for you is to try a different USB port on the computer to see if it isn't an issue with that specific USB port. Are you using the cable that came with the device (recommended) or a 3rd party cable (may not support data transfering properly)? You can also try restarting both the device and computer and retest. It's possible that there's a driver conflict on your Dell. Here's how to check for these types of conflicts: http://goo.gl/qH4m5
Keep us posted on any additional information/details about your issue.
Thanks,
MikeS_VZW
Follow us on Twitter @VZWSupport

Charge my phone with USB cable

Hi DearsI have a Z3-compact phone. When I connect it to my copmuter with usb cable, it does not charge.Please help me, how can I solve this problem????

Hi Z3-sam,
Welcome to the community.
One thing to note, if you are using the device on say a work computer, there may be security restrictions that wont allow MTP mode to charge the handset.
You could try changing the device in to MSC mode and then seeing if the charge works.
Menu > Settings > Xperia Connectivity > USB Connectivity > USB Mode > MSC
let us know how you feel.

I had a itunes logo with usb cable ? can anybody help me

i was updating my ipad into 7.0.3 but my ipad has a problem with wifi, because if this problem the network was disconnected then i press home and sleep button
then it bring a itunes logo with usb cable
is i need to format my ipad ? it contains a important things

If the Apple Mobile Device driver is not the problem or you need more help see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you come back with the wording of the error mesage we can probably provide more specific recommendations.

IPod rests playlist when recharged with usb cable

Similar Messages

Maybe you are looking for