IPod's display of Vietnamese character

Does anyone know why iTunes can correctly display vietnamese characters, but iPod doesn't? Is there a way to remedy this?

This page shows the languages currently supported on the iPod.
http://support.apple.com/specs/ipod/iPodwith_video_30_60GB.html

Similar Messages

  • Help with ipod color display

    Tenog un ipod color display de 60Gb de capacidad, recientemente le hice un software update y la capacidad del ipod cambio a 18.1Gb y no eh podido cambiar la capacidad. Ya intente restaurarlo, hacerle otro update, darle format y no sirve nada. Que puedo hacer?

    Tenog un ipod color display de 60Gb de capacidad,
    recientemente le hice un software update y la
    capacidad del ipod cambio a 18.1Gb y no eh podido
    cambiar la capacidad. Ya intente restaurarlo, hacerle
    otro update, darle format y no sirve nada. Que puedo
    hacer?
    Lo siento, mi espanol no es muy bueno.
    Puede hablar ingles?
    El articulo que puede aydarle no esta en espanol, pero:
    http://docs.info.apple.com/article.html?artnum=93499
    CG

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • My ipod touch displays message "ipod touch disabled,connect to itunes."I have held down on/of switch until apple logo appears on screen of ipod touch , but the problem persists. Any suggestions?

    My ipod touch displays message" ipod touch disabled,connect to itunes. Ipod touch does no connect with i tunes. I hold on/off switch on ipod touch until Apple log appears on the screen, but the problem persists. Any suggestions ?  I am running Itunes 10.6(7)  My Mac OS X Version is 10.5.8.

    I connected ipod touch to my IMAC while holding on/off switch as stated to by anothe community memberand problem is solved. I wasable to update and reatore.  I have been trying to solve the disable problem
    for weeks. althou you did not actually solve the problem, In time you probably would. You were on the right track  Thank you.
    This helped me
    rbrookstone

  • HT1926 Whenever i download iTunes 11 on my computer it gets downloaded but while installing it comes either "invalid drive G:/" or "the folder iPod 5 contains an invalid character" so can you please tell me whats the problem

    Whenever i download iTunes 11 it downloads but while installing it comes either "invalid drive G:/" or "the folder iPod 5 contains an ivalid character "
    i have downloaded and iTunes but dosen't get instaleed so please help me

    INSTALLED*

  • Arabic letters are displayed as junk character in PDF preview

    When we try to view (HFR Financial reports in PDF preview Arabic letters are displayed as junk character. While the same is shown correctly in HTML view.
    Oracle EPMA version we are using 11.1.1.3, please provide some solution on this issue

    This could help if you are connecting to essbase or planning:
    1.Set the ESSLANG environment variable on the Essbase server to
    ESSLANG= Arabic - Saudi Arabia (ISO)@Binary
    2. In Financial Reporting, you must use the Essbase APS ADM driver rather then the Essbase Native ADM driver. Set the driver in \Hyperion\products\biplus\lib\fr_global.properties by setting the parameter
    UseEssbaseEDS=1
    3. In \Hyperion\products\biplus\lib\fr.env, set the ESSLANG environment variable as follows:
    ESSLANG= Arabic - Saudi Arabia (ISO)@Binary
    4. Re-start the Essbase and Financial Reporting services.

  • How to display a particular character  of a word

    Hi,
    can anyone tell me how to display  a particular character of a word in smart forms,Ex:suppose word is India and i want to display character d..
    Thanks in advance.
    Rajesh

    please look at the below explanation:
    DATA: VAR TYPE CHAR20.
    VAR = 'INDIA'.
    WRITE:/ VAR(3) - THIS WILL PRINT FIRST THREE CHARACTERS OF THE INDIA SO THE OUTPUT WILL BE : IND
    WRITE:/ VAR+3(1) = THIS WILL PRINT 1ST CHARACTER AFTER FIRST 3 CHARACTERS SO THE OUTPUT WILL BE : I
    COPY REQUIRED CHARACTERS IN ANOTHER VARIABLE.
    DATA: VAR2 TYPE CHAR10.
    VAR2 = VAR+3(2) .

  • Displaying multiple asian character sets?

    Hi all,
    Just wondering is there anyway to display multiple asian keysets in a java application?
    Right now I can set the locale to say Chinese with the command line property:
    -Duser.language=zh
    I could do the same with Japanese or Korean. But I was wondering is there anyway to display all these character sets in the same program? Would I have to set the JTextFields individually to the relevant fonts so i can see the characters? E.g. if the user wants to input Chinese, all JTextFields are set to Simsun. Same for other character sets?
    thanks,
    J

    Hi Justin,
    As for myself, I used Robot class on Win Xp to switch between input languages in a form (French/Japanese). That works well but requires that you map manually each language to a key combination a Robot can emule.
    I hope that could be useful,
    Best regards,
    Lionel Badiou
    CodeFutures -
    Java Code Generation
    http://www.codefutures.com

  • HT201263 after restarting and restoring ipod touch, display is still white screen

    after restarting and restoring ipod touch, display is still white screen. I have done this several times. One time, the display went to the home screen, but immediately went back to the white screen when I plugged it into the charge cord. The music continued to play however. help!

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • IPod Video - Display Settings (Title, Artist, Album...)

    I am trying to figure out if I can alter my IPod Video display settings. When a song is playing, it shows the album art with the song title, artist, and album adjacent. Is there a away to change this display so that it does not display the album while the song is currently playing?

    jayceepee99 wrote:
    Three issues here.  The pre-pending is useless when selecting songs to play, plus it.takes up much of the admittedly limited space in my on-screen menu.  Since it doesn't help me select a song to play, it simply prevents more relevant info from being displayed in that area.  However, there is a second area on the menu that is designed to list title, artist and album but those fields are blank - despite I-tunes inclusion of the info in the xferred files.
    JCP,
    Regarding the tags, on an MP3 CD iTunes simply burns whatever is embedded in the MP3 file.  From your description, it sounds like the Onkyo is seeing the filenames but not the tags, which does seem strange.  You may want to try the question in an Onkyo forum.
    If you don't need the pre-pended serial number, and don't care about the sequence, you can burn from iTunes as a data CD instead of an MP3 CD.

  • My daugther's ipod only displays the apple on the screen and we cant get it to do anything  can anyone suggest what to do please?

    my daughter's ipod only displays the apple on the screen and we can't get it to do anything. any suggestions ?

    tia,
    Click on the following link, which is an Apple tutorial which is related to the problem you are having:
    http://support.apple.com/kb/TS3281

  • Vietnamese Character in PO printing

    Hi,
    Were  doing SAP vietnam, one challenging is how to make the PO prinout capture the Vendor Name written in Vietnamese character..
    The vendor master name is created/entered in the vietnamese character, during PO creation, the correct vendor name in vietnamese character is captured  but during PO printing, the vendor name is having inconsistent character..
    eg. vendor name created in vietnamese       Tạo mẫu
    the vendor name change during PO printing   T#o m#u
    we are using a customize program Z(copied of orignal PO printing program and Zmedruck...
    pls. help

    This issue relates to the manner in which the print program is translating the characters, so i would strongly suggest work with your abaper & your basis consultant to ensure the requisite language packs are available.
    Good luck.
    Regards,
    Vivek

  • How to display a unicode character in a list ?

    Hi,
    sorry if the question seem to be really easy but I doenbt found of to diaply a special character in a list.
    I thank that it was easy :
    1) display tha windows character map
    2) copy paste the charatcter in the ABAP Program to obtain something like this :
    write '≤'.
    But the displayed character is '#' . So, could you tell me how to display a gived unicode character ?
    Regards,
    morgan

    Hello Morgan,
    you need SAP system with unicode. You can check it from every dynpro/mode:
    System->Status: SAP System dada  Unicode system: yes
    I have checked your sign '≤' on my not UC system: is displayed: '='.
    Bye,
    Peter

  • TS2771 My Ipod touch displays white lines across the screen.  I've turned it on and off but still shows up HELP!!!

    My Ipod touch displays white lines across my entire screen.  I've turned it on and off and it still hasn't cleared up.HELP!?!

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that points to a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My iPod is displaying "iPod is disabled"

    My iPod is displaying "iPod is disabled". It is frozen and will not do anything. How do I fix this?

    If it's showing the red disabled screen, then in order to allow your computer's iTunes to reset it you may need to put it into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPod and restore/resync your content to it
    If you are doing it via a computer that it isn't normally synced to then (from http://support.apple.com/kb/HT1212) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Maybe you are looking for