IPod screen is white blank when I restart it.No apple logo.updaterwontrecog

I unplugged my iPod video while it was still downloading a video. It instantly erased all my music and videos. Everything was gone, but the iPod showed that there was still memory taken by something, so I thought that the music was still there but it had a glitch or something. I downloaded the appropriate Updater from apple.com. I started to restore it, but then thought better of it and unplugged the iPod again, thinking my music was still on it and that instead of restoring it, I should just update it. Now, it's REALLY screwed up. The screen is white when I restart it. There's no apple logo. And it makes noises. Three beeps. I really need help! Is there something I can do to fix it? Or should I just send it in to Apple. I've only had it a little over 3 months and I have over 200 days left on my warranty. Thankfully, I can backup all the music and videos if my iPod ever starts working again. PLEASE HELP ME!!
HP   Windows XP  

You messed it up by not allowing the firmware update to finish the installation before disconnecting the iPod. Try these steps.
Reset the iPod.
If the reset doesn't help, then put the iPod into forced disk mode.
How to put the iPod into disk mode.
Now connect the iPod to the computer. This step may immediately take you to the iPod's normal display screen. Reset the iPod to exit disk mode.
If you still have the white screen, then you should use the updater to restore the iPod.
Wait until the restore has finished before disconnecting the iPod. If you're unsure, wait at least 20 minutes (it's probably overkill but best to be sure). In my experience, the software updater for version 1.1.1 takes longer to complete the process than previous updaters.
That should cure the issue.
If however it doesn't, and your iPod is still non responsive (doesn't reset, nothing on the screen or button presses don't work), then it will have to be sent away for service.
See: iPod service request.

Similar Messages

  • Ipod Screen Is White And Power Button Jammed

    My Ipod Screen Turned White(blank) And My Power Button Is Jammed What Do I Do?

    You can let your battery drain and take it to an Apple store near where you live.

  • My ipod touch screen went white and when i plug it into my computer....nothing happens.  help!

    I went to turn on my iPod Touch one day and the screen went white.  Tried resetting and got nothing.  Tried plugging in to usb port and got nothing.  Neither the computer nor iTunes recognizes my device.  What do I do now?

    By resetting did you see the apple logo? Try pressing and holding the on/off and home buttons simultaneously until the screen goes blank (black) and you see the apple logo. It should take about 10-15 seconds to reset.

  • What are the parts i will need for my ipod since my ipod screen remains completly blank white

    what are the parts i will need for my ipod since my ipod screen remains completly blank white

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iPod screen is white and keeps turning back on white

    My iPod Touch screen has gone white, I am able to turn it off and sometimes use the touch screen but it always comes back white even when I restart it. I have tried to turn it off which I am able to but the screen comes back white. I sometimes can use the touch screen but I can't see what I'm touching. This happened after I dropped my iPod. My iPod is 4th generation, not jail broken or anything. The screen has had a problem of not sticking to the interieur of the iPod ever since I had to replace the cracked screen. What could I do to get it back to the way it was?

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. However, then may be unwilling to do anything since you took it apart. Problem could be due to a loose connection or something is broke.
    Apple Retail Store - Genius Bar                                     

  • I wanted to restore my ipod touch 4G, but everytime it is restoring with the apple logo, the screen goes partially white and my itunes says "error 9"... what should i do?

    I wanted to restore my ipod touch 4G, but everytime it is restoring with the apple logo, the screen goes partially white and my itunes says "error 9"... what should i do?
    plz answer me~

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    http://support.apple.com/kb/TS3694#error9

  • HT201263 my ipod screen turned white and i seen online that you hold the power button and the homescreen button for it to go off. But it wont turn back on. I would have to let it die and charge it it turns on but fades to white. what do i do?

    My ipod screen turned white. i had read online that if i hold the power buton and the home button that it would turn off. It turned off but wouldnt turn back on. I had left the ipod on the charger all night and tryed this morning. nothing would happen. but when i checked it this afternoon the battery was dead. when ever i turn it on the password screen fades to white. what do i do. My warrenty just ended a week ago.

    Try here:
    iOS: Not responding or does not turn on
    Also try letting the battery fully drain. After charging for at least an hour try again.
    If not successful time for an appointment a the Genius Bar of an Apple store.

  • IPod Screen Is White? Nothing working!

    My iPod's battery died and so I connected it to my iPod dock which recharges and the screen went white. When I press the on/off button the screen goes a light shade of black. Press it again, white. Pressing home makes it go white again. No error message, just white or light shade of black. HELP!

    - After charging for a couple of hours have you tried resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next would be to connect to a computer and try to restore the iPod.  If iTunes does not see the iPod try placing the iPod in recovery mode.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Clips don't play back - screen is white/blank.

    Hey... can anyone help with this problem? I thought I'd try here before calling anyone. I don't know how this happened because I don't think I did anything or changed any settings. When I open up iMovie HD and record a clip and then try to play it back, the playback screen is white (blank). The marker at the bottom (i.e. the thing that shows what position the clip is in) moves forward normally, as if the clip is playing, but you see nothing. The still image of the clip shows up fine in the clips section on the right, but the actual clip won't play. HOWEVER, if I go to edit the clip, like add special effects or whatever, it WILL play while I'm messing around with the effects (though obviously the sound doesn't play). So I know the clip, y'know, isn't a figment of my imagination. :P
    Anyone know what the **** this is about? Thanks, I'd really appreciate it.

    (i.e. the thing that shows what position the clip is in) FFR this is the play head.
    Yes, Apple can. First you need to tell them about it and report the bug.
    Subject: I/O API. iMovie
    http://www.apple.com/feedback/imovie.html
    If you can confirm the Quartz effects as working please report this as a Bug in iMovie Feedback.
    Notice below I did say preview. This is something that has stuck out as it is easily replicable and very odd.
    "A glance across all the Apple boards and you can tie everything into this new API as it is the root. QT is a major part but I don't believe it is a problem other than being at a higher degree of accuracy tan in the past, i.e. the Quartz effects in iMovie preview fine.
    So no it is not a figment of your imagination. Please report it.
    Its all about the I/O API.
    Thanks
    W1

  • Time Machine causes screen to go blank when starting backup

    Time machine causes screen to go blank when it starts backup.  I have cable wireless modem with ethernet to time machine; then ethernet to computer.  Cable company just increased speed to 30. What may be happening?  I am afraid of losing all my data.  Screen recovers within one second, but it goes completely blank when time machine starts backup

    Time machine causes screen to go blank when it starts backup.  I have cable wireless modem with ethernet to time machine; then ethernet to computer.  Cable company just increased speed to 30. What may be happening?  I am afraid of losing all my data.  Screen recovers within one second, but it goes completely blank when time machine starts backup

  • What should I do, my iPod screen is white.

    What should I do if my iPod screen is white?

    Hello Gma J,
    Thanks for the question, and welcome to Apple Support Communities. The following troubleshooting assistant will take your through the five "r's" of troubleshooting:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thanks,
    Matt M.

  • IPod screen went white

    My ipod screen went white and it says i should go into recovery mode but it wont let me do those steps after i hold the home and button at the top it wont go to the slide to power off can someone help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.

    Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.
    Any tips are very much appreciated.

    Place the iPod Touch into DFU mode.  This will be similar to what the factory would do to install the iOS onto new iOS devices.
    Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
    To place your iOS device into DFU mode.
    First connect you iOS device to you computer.
    Open iTunes if not already open
    Now turn off your iOS device using the power swipe.
    Press the home and sleep button on your iOS device for 10 seconds.
    Release the sleep button but carry on holding down the home button.  For another 10 seconds.
    Your iOS device should now be on DFU.  Click on restore and iTunes will download the latest iOS for your device.
    Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it)  Or go into an Apple Store.

  • My IPod screen went white and I can't do anything on it. Is it like a virus?

    My IPod screen went white and I can't do anything on it. Is it like a virus? I need some help.

    See  Display Shows White Screen Here
    http://support.apple.com/kb/TS2771
    If no joy... Try letting the Battery Fully Drain... Then Charge the Device for at least 30 Minutes...

  • Hello I have a white MacBook when I switch it , the apple is still loading, and the window of aceuille not displayed! ,

    hello I have a white MacBook when I switch it , the apple is still loading, and the window of aceuille not displayed! ,
    <E-mail Edited by Host>

    Try the not-charging topic of:
    iPod touch: Hardware troubleshooting
    It could be that the battery is dead.

Maybe you are looking for

  • How to create php login in flash builder 4 using php data service

    I have seen the tutorials for creating a php login authentication using HTTP service in flex 3 It uses genrating xml and reading it . But i want to know how to do that with the help of php services in FB4 . I'm a newbie so please any kind of help wou

  • Help with Paged view dataset!

    I'm new to Spry and not really a programmer, but I'm sure what I'm trying to do is pretty simple, can anyone help? Here's what I'm trying to do: - I have created a dataset (dsProjects) which contains 7 rows (one of the column values is 'Proj_id') - I

  • Audigy 2 zs quest

    I am new to the Audigy card and would like to know how to record whatever is playing on my computer such as something from the internet.

  • Connected iPod to my laptop, 4,500 songs deleted

    I used several different apple USB cords and they all recognize my phone, but not my iPod... It just charges and yesterday I plugged it in to add more songs, and EVERYTHING was wiped out.. I plug my iPod into my laptop and its charging but no iPod ic

  • Parallel Processing in Client Copy

    Dear Experts, I would like to know if it is possible to increase the parallel processing while Client Copy is in progress? If not, is there any way to speed-up the process. Also, if you please let me know how I can find out the CC is progressing. For