Ipod screen magnifies without touching it

When I press the "home" button to turn on my Ipod, the screen is automatically magnified. I've learned how to get down to the slide button to get to my icons but even they are magnified. They are so large, I only get 4 full icons on the screen and two half ones at the bottom. I've tried pinching my fingers together on the screen and going into "settings" but I have no idea what I'm looking for.
The screen did this on it's own and will reduce down to the normal size while opening up a program but immediately zooms to the large size when it gets to the new screen.

Disregard, I found the solution within this discussion board. Sorry for my impatience!

Similar Messages

  • Right margin (1/2") of iPod screen unresponsive to touch-Fix?

    the right margin (about 1/2" inch) of my iPod 4th gen doesn't respond to touch. Anyone know why - anyone suggest a fix? Already tried a "restore" - it didn't work. However, for a brief while yesterday it was responsive. Now it's not again.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen?

    can i re calibrate the touch screen for my iPod 4th gen without use of the touchscreen? via CPU or other devices?

    There is no way to calibrate the touchscreen.
    Just what problem are you trying to solve?

  • Without touching the screen, only 2 of my apps started shaking randomly. Not the kind of shaking when you want to delete/move. It was odd. Any idea as to what that could be?

    Without touching the screen, 2 of my apps started shaking randomly. Not the kind of shaking when you want to delete/move the apps. It was odd. Any idea as to what that could be?

    An "other" that large usually indicates that the "other" includes corrupted files.  Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Backing up, updating, and restoring iOS software

  • My Ipod screen is broken and i tried to sync all my data onto a computer, BUT it says i cant access it without my passcode, plus I cant see the screen HELP

    My Ipod screen got smashed so I cant  enter my passcode and download all my data to a computer where itcan be kept safe plus all my muysic i doint want to lose that either and all the apps, anyway that i can log onto my ipod and sync it to a computer without being able to put in my passcode?

    AreBear wrote:
    So my iPhone screen is completely shattered and it does not respond to touchscreen. I tried unlocking it with the thumb reader, but it did not work. I have since gotten a new iPhone, but I would like to get my pictures off the old iPhone. Any help would be appreciated.
    Simply restore from the latest backup you made to iCloud or iTunes, prior to the damage incident. You were backing up to iTunes regularly, or at least using iCloud to backup wireless & automatically... right?
    If you cannot make a backup of the damaged device at this point, and you do not have a backup of the data on the device, then you cannot access the data on the device, and it is lost.  What would you have done if instead of simply being damaged, it had been lost or stolen?
    This is a harsh lesson.  Now you know why it is recommended to backup regularly.  Learn from your mistake, and don't repeat it.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

  • I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    You did install the latest iTunes (10.5) right?  If the problem was that iTunes does not see the iPod try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • IPods screen went black but assisted touch on screen still works?

    IPods screen went black but assisted touch on screen still works?  What's would be wrong?? I have dropped it and the lower volume button went partly in side the IPod (thats why i had the assisted touch on) and its been working very slowly fore the last week or so. but other then that it was fine.

    With the information given, If the screen is completely black even after the reset, it's sounds as a hardware issue
    Could be : The battery
                    The charger
                   The phone itself
    You can narrow these down one by one preferably.
    -If you have an extra battery, test it.
    -Try another charging cable or another outlet
    If neither of those affect it, you can also wipe the phone, but that's pretty much the last last step you should do since it erases everything.  Then restoring it. Time varies.
    If you are still having trouble, contacting your carrier, the closest Apple Store, or the technical support line for Apple.

  • Why does my ipad2 flip pages without touching screen?

    My ipad2 has issues with turning pages without touching the screen. Sometimes it happens in iBooks. It does not do it all the time. I did a reset and sold it to a friend. The iPad started crashing and acting crazy shortly after he did his transfer. What could be the problem?

    Settings>General>Acessibility>White on Black>OFF
    If you don't use Multitasking Gesture, turn it off.
    Settings>General>Multitasking Gesture

  • Ipod nano 7th generation touch screen doesnt work

    Ipod nano 7th gen touch screen wont respond only 6weeks old?

    Have you reset it? Hold down the power and home buttons, wait for the Apple logo, let go of the buttons.

  • How can I get into my Ipod Classic (160GB) when it is screen lock without entering a combination?

    My Ipod Classic (160GB) was recently put into screen lock without knowing the combination, is there a way to bypass this?

    I think this article will help
    http://support.apple.com/kb/HT1350

  • I bought an Ipod touch Used, I connected to my PC and I wanted to restore it, but the restoration could not be completed, since my PC does not recognize my iPod or iTunes. On the iPod screen displays an image that says I need to connect the device to iTun

    I bought an Ipod touch Used, I connected to my PC and I wanted to restore it, but the restoration could not be completed, since my PC does not recognize my iPod or iTunes. On the iPod screen displays an image thatsays I need to connect the device to iTunes.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((

    Im Trying to re-Activate my ipod touch cause i have just restored it and on my ipod screen it has connect to itunes and on itunes i get a message "We are unable to activate at the moment please try again later" somthing like that please help :(((
    HELP!!!!Zoom in to read please

    but can not be unlocked
    If the phone was NOT unlocked, it can't work or be activated with any other carrier than AT&T.  It CAN'T be used with Tigo or Movistar.
    Your post makes very little sense.  Maybe you can get some help with English. 

  • After my software update, my iPod screen won't automatically turn off without manually locking... help!

    my iPod screen won't automatically turn off without manually locking... help!
    Does anyone know how to change the settings so it will turn off/dim/lock automatically without needing to press the white button at the top all day?  I'm draining batter and it's so annoying!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • My ipod screen shows " this ipod touch hasn't been backed up in 10 weeks .backups happen when this ipod touch is plugged in locked and connected to wifi" ipod screen is locked and not opening .any solution

    my ipod screen shows " this ipod touch hasn't been backed up in 10 weeks .backups happen when this ipod touch is plugged in locked and connected to wifi" ipod screen is locked and not opening .any solution

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then go to Settings>iCloud>Storage and Backup and either turn off iCloud backup or backup to iCloud

  • I can't syncronize my ipod classic 80gb anymore. "the system can't find the disk", but it's always connected without touching it! Can anyone help me?!

    "the system can't find the disk", but it's always connected without touching it! Can anyone help me?!
    I tried to reset the ipod but I cannot syncronize the new music I added.
    Could it be a problem of the songs or the ipod?

    Assumng you have a PC, start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Maybe you are looking for

  • Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE

    Hi I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error Document doesn't have document category even thougth i am passing document category in header as well as item lavel. In VBUK

  • Error during java migration tool kit phase

    Hi All , We are migrating the BI 7.00 EHP1 from  (Win 2008/SQL 2008) to Target (Win 2008/SQL 2008).This is a export/Import based method using sapinst tool. Import stopped at the "Java Migration Toolkit" phase.The following are the error logs , if any

  • JSC with Tomcat 6

    Help, I'm using JSC 2.1 with Tomcat 6 on Windows. I build a simple web app in JSC (hello world, without any jdbc) then exported to J2ee 1.4 war file. Next I place the war file in tomcat webapps directory. I also put the the jsf-api, standars.jar, jsf

  • FM_SERVER_PKG for MDS 9700

    Hello, Can anyone confirm if FM_SERVER_PKG is still required on MDS 9700 and DCNM? I included DCNM SAN licencse for managing MDS with DCNM, and I think Fabric Performance feature is included in that license, but I need confirmation. Regards, Krzyszto

  • Edirol ua 25 not recognized garageband

    hi I am trying to setup a Yamaha P 80 keyboard through Edirol UA 25 but it says that no MIDI in is present. I have already installed the drivers for 10.8.4 Os X...thank you