Ipod screen shows only Apple logo

i Just updated Itunes, and was going to put in some music when the ipod check or something popped up and closed itunes, and disconnected my ipod from the computer. I took a look at my pod, and all i could see was the apple logo refreshing and unrefreshing. I tried the toggle hold + menu and select. Nothing
I tried to restore the pod, but nothing as well, mainly because the ipod does show on the computer.
(heres a vid link or it.)
http://www.youtube.com/watch?v=XEXQ-DqA77s
I've been thinking of letting it just dry out, but I know the battery life is still ong and is going to take a while.
Can anyone help?

I made my appointment online through the Apple Store page:
http://www.apple.com/retail/
Find the store you want to go to, then click on "Reserve" under the Genius bar sidebar.
If you registered your iPod, they should be able to pull it up by the serial number. If you have the receipt, you can take that with you as well. iPods do come with a 1 year warranty, so you're still covered. There may be some type of replacement fee you have to pay since yours is just over 6 months old. If there isn't an Apple store near you, call the support number and I'm sure they can help you out.

Similar Messages

  • HT201263 SIM code message after restoring but phone screen shows only Apple logo

    iTunes says its restoring my iPhone 3Gs then I get the message "The SIM card inserted in this iPhone is PIN locked. Please enter the PIN code of your SIM card and connect your iPhone to iTunes again". Problem is I can't-- the phone displays only the Apple logo again! Any ideas of what to do next? Not looking good! I have tried restarting computer and getting phone turned off and in recovery mode. Still same problem.

    My husband brought up a point- I'm not sure if I did a back-up on my phone after I updated to iOS 6. The backup in iTunes can be from an earlier iOS . Could this be an issue??

  • My iPod keeps showing the apple logo + a blank screen and the lock screen keeps freezing when trying to unlock it.

    Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
    I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
    I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

    my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

    Have you tried a reset first? If it works, you won't have to go through the restore process.
    Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
    If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
    Hope this helps.

  • Ipod shows only apple logo

    I was updating my ipod and the battery of my ipod got completely discharged. After charging the battery again the ipod now shows the apple logo and then after 30 seconds it makes sound and its backlight gets turn off for 5 seconds.
    I have tried to restore the ipod but the ipod updater does not recognize it. Neither itunes is recognizing the ipod now.

    This article may help you restore your iPod: "iPod shows up in Windows but not in iTunes" http://docs.info.apple.com/article.html?artnum=93716

  • Iphone showing only apple logo on screen, iphone showing only apple logo on screen

    iphone showing only apple logo on display

    Hello!
    Since your iPhone has hanged on you follow these steps
    Hold the Home button and the Sleep/Wake button until it switches off, do not let go,
    Keep holding until you see the Connect to iTunes symbol
    Now you can let go and plug in your iPhone to your computer and restore from backup!
    Hopefully I resolved your issue

  • How to reset all setting on my iphone 4s? when i have done procedure for reseting my screen has gone and showing only apple logo and i taking very long time i cant off or on?

    i am trying to reset my iphone 4s with all original seting when i have done all procedure it has gone blank and showing only apple logo and i cannt off or on and not getting start.please advise/

    try holding the home and power buttons at the same time for about a minute!

  • IPod screen showing only USB cable to be connect to iTunes after Update and Restore.

    My 4G iPod model no is A1367 and the software version is 4.2.1, so as it’s a very old version i wanted to update the software to iOS 6.1.6, so I have taken backup, then Update my device with iOS 6.1.6 after that I tried to restore my device, it started to downloaded (847.8 mb)  iOS 6.1.6  again and again and iPod screen showing only USB cable to be connect to iTunes. please tell me how should i resolve it.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device... Re-Sync your Content

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT201263 i have iphone 3gs, after restoring my phone it shows only apple logo please help me

    i have iphone 3gs, after restoring my phone it shows only apple logo please help me

    See your other post on this Topic...
    https://discussions.apple.com/message/22315227#22315227

  • HT201412 my phone restore but does not starts it shows only apple logo please help me

    HI
    My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help me

    See your other post on this Topic...
    https://discussions.apple.com/message/22315227#22315227

  • Accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully

    accidentally cancelled my 5.1.1 update and now my screen shows the apple logo and then it turns black and then the logo over and over again i cant turn it on fully

    Check out this Apple article -> iOS: Unable to update or restore
    Can you put the iPhone into recovery mode? Do you see an error number when trying to restore the iPhone?

  • Envy 100 printer. screen shows only hp logo doesn`t respond to touch

    envy 100 printer screen shows only hp logo. Doesn`t respond when it is touched. 

    Hi artie11235,
    I understand the front panel of your HP Envy 100 is unresponsive and you are only able to see the HP logo. Please start here: The HP Printer Won't Turn On or Respond When the Power Button is Pressed. If you have completed all steps listed here with no success, I suggest calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I was erase all contect and data after it it showing only apple  logo from last 2 hour i need help

    i was erase all contect and data after it it showing only apple  logo from last 2 hour i need help

    You should reset your iPhone,
    Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
    Don't worry about doing this as you will not lose data or settings.
    Good luck and do report back.

  • My ipod keeps showing the apple logo on and off after i updated it?

    my ipod keeps showing the apple logo on and off after i updated it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

Maybe you are looking for

  • Form9i open word and print direct to printer

    I upgraded developer forms 6i to 9i and found problem in case of print direct to printer. The report was not create from develop reports but it create from Microsoft Word. I generate this report via developer forms call function to generate microsoft

  • How to view a pdf file as a slideshow in iDVD

    I have created a document in PAGES that I have saved as a pdf file. I would like to have this as a chapter in a family movie that I want to burn as a DVD. I have done this before but cannot remember how.! I think I went through iPhoto and iMovie and

  • ITunes / iPod touch not syncing correctly

    I'm having two problems at the moment, the first of which is an error which comes up while syncing the mail accounts to my iPod. The following message (http://www.moventouch.com/itunes.png) comes up (the part which has been blanked out contained my n

  • External monitor for HP Omni 10

    what can I use as an external monitor for the HP Omni 10? I have an HP W7072a, will it work? This question was solved. View Solution.

  • CONSOLIDATION BETWEEN TWO COMPANY CODES

    hello! plz help me to make a doc n configuration in: CONSOLIDATION BETWEEN TWO COMPANY CODES in version 6.00 mail id: [email protected] regards sirisha