Ipod Scroll won't work

I was listening to my ipod nano (2nd gen) in the car. Turned it on everuthing was working fine. Put it on shuffle and listened. After about 45 min. went to cange the volume and the scroll pad wouldn't work. I've resseted a million times and still nothing. I restored it and nothing. anyone with any other solutions please reply!! thank you!

Having the same problem for 9 months with Ipod 30 GB. Scrol pad will not work. Cost about $90 to have it diagnosed. Used in car too. I have never been on discussion board, but would like to learn about this.

Similar Messages

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Curve 9300 scroller won't work

    For the past few months, my scroller has been sticking and freezing, but i have managed to fix it everytime by pressing down hard or doing a battery pull. Also, the screen would just randomly turn white and then the phone would restart. The white screening was getting unbearable, so i did a software reload through desktop manager and since my scroller won't work at all. It wont select or scroll. Someone please help!!!!!!!!

    Good deal.  I still think the phone is having hardware issues from what you described and a tech will have to check it out.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

    My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • IPod function won't work on iPhone 4

    My iPod application won't work on the iPhone 4. I can play YouTube videos, listen to previews on iTunes, but for some reason whenever I hit the play button on a song in iTunes it doesn't start on any of my songs. I've tried the lyrics app to play music, I've tried powering off and restoring it by holding home and power down and still nothing, help!

    Read in another thread a solution that worked for me. Basically, you need to delete the music from the phone and re-copy from iTunes with 2 syncs. In the music tab, uncheck the boxes in the playlist, artist and genre option, removing all music from the phone, then sync. Then, re-check the desired music to copy back to the phone and sync. Music should play now from the phone.
    I echo the sentiment of another poster that iOS4 really is a disaster. Problem like this should have been solved before release.

  • Windows 7 and dv4-1125nr TrackPad - scrolling won't work

    I have installed all the latest drivers via HP support's website and the trackpad's scrolling won't work on my dv4-1125nr when in Windows 7. It works fine in Vista, so I'm wondering if there is a way to get it working properly in Win 7. Also the software update manager is not available for download under my model number. If that was available, perhaps that would find a necessary download and install accordingly. Any help is greatly appreciated as this is a major annoyance!! Thanks!

    Hi Daniel, thanks for your post, recently I also upgraded my laptop(dv4-1125nr) from vista to Win 7 ultimate, after then my touchpad(touch keys just above the keyboard, it contain mute, vol. up or down, wireless active or inactive) is not able to work.
    You informed that we need uninstall and then install Synaptics touchpad for Win7 by HP here
    I would like to know which driver i need to uninstall and then install above one and even i attached my laptop contral panel screen shot for your reference. your help is highly appreciated.
    Thanks,
    Praveen Kumar. K

  • Power button on ipod touch won't work?

    The Power button on my ipod touch won't work at all, any suggestions?

    Okay it says here https://selfsolve.apple.com/agreementWarrantyDynamic.do that your warranty has expired, my recomendation is to either clean it out with a needle, or just keep pushing it hoping it will un-stick.
    hope this helped

  • My ipod wheel won't work

    I have an ipod nano 4th generation and it suddenly stopped working.  I tried restoring it using itunes and while the computer did the restore it hasn't fixed the problem.  the scroll wheel won't work, the screen keeps going dark (but not completely).  If I toggle the hold button on and off, I can get the screen to come up but can't select anything since the wheel won't work.  I've never had a problem like this with my ipod and wonder if anyone has any thoughts as to how to fix it.  thanks

    Sounds like you have a hardware problem.  If you cannot find a solution on the iPod Repair Tutorials website, you will have no alternative but to take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • IPod screen won't work?

    so I opened up my ipod and reassembled it back, and then this happens. The iTouch does work, but the image of the ipod on the screen won't work? Help what do I do!!

    Seems like you have a bad connection or you broke a conductor in a ribbon cable. Or maybe a bad digitizer. ir logic board.

  • IPOD updater won't work

    The recent updater won't work for my ipod mini. It downloads and opens, but after I select Macintosh HD to dl it in, the next page where you can select what you want to install won't let me select. WHat's going on?

    Is your antivirus software enabled? Do you have a fire wall on? Disable your antivirus software, try again and when you are done updating then enable your antivirus back on.
    See if that works.

  • Ipod suddenly won't work with an FM transmitter

    I have an iTrip that I used successfully plenty of times with my nano. I haven't used it in a year or so, but now when I plugged it into my ipod, the ipod says "FireWire connections are not supported. To transfer songs, connect the USB cable provided. Press Center to dismiss."
    In the year or so that I didn't use the iTrip, my ipod froze and I had to reset it, so I don't know if that has anything to do with it.
    Anyone know why I'm getting that message now saying my iTrip won't work, when it did before? Thanks much!

    If that doesn't work try this it just worked for me as i was having the same issue.
    1) Plug the Nano into the airplay and tune to the station
    2) When everything is set up, reset the Nano (hold down Menu and Select at the same time until it reboots)
    3) enjoy the music

  • My ipod scroll doesn't work at all. how do i fix it? do i have to send it in? how much would that cost?

    My ipod nano 4th gen. scroll doesn't work at all. how do i fix it? do i have to send it in? and how much would it cost?

    So it connected wirelessly at the Apple store where you took it for service? What kind of wireless router are you using and have you updated the firmware for it?

  • IPod charger won't work

    It was fine when I went to bed and this morning it wouldent work it still looks the same but it won't work at all..

    Not Charge
    - See:     
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • 4.1, now ipod app won't work!

    Just realised the iPod app on my 3g won't work after the update. It launches to the initial screen, but nothing works, then it crashes to the home screen.
    Tried a hard reset, no joy. I'm thinking that a restore via iTunes won't be any use as the last backup was with 4.0.1, but before I try that, anyone any suggestions/experience of this?
    Ta.

    Oops, should Google before asking here! Seems it's a common issue, needed to sync to sort it out.

  • My iPod Video won't work with videos!

    my ipod video (that i got for christmas) won't work with videos, tv shows, etc. with movies, it says it is loading for about 10 seconds and then it goes back to the menu. same with tv shows, but is completely black screen. help! i don't know what is going on and i really need my ipod to play videos.
      Windows XP  

    Just want to thank you for this brilliant solution. It worked!! I also want you to know that I actually went into the apple store today, and none of the clerks had any idea how to fix this. That excludes the ''genius bar'' which had a five hour wait for appointments! Thank you so much again, merrymusic

Maybe you are looking for

  • Multiple payload mapping in zip file..

    Hi, is it possible to map multiple Payloads in one XI Message? My Source File is a zip (xml files) I unziped it in Sender CC I have message structure as this in my integration server XI Message - payload 1 - payload 2 As there are multiple structure(

  • Oracle Web Forms - need a method to get data from a Form to Excel

    I am running Oracle Forms 6i for the web. I need a way of using the old DDE or OLE implmentation to get data to an Excel spreadsheet. Ideally opening an existing spreadsheet and inserting new data. Anyone been able to do this ? Thanks in advance Dave

  • CR XI Crosstab report: group suppressed -- Debug strategy?

    Hello, I have a Picking List report that uses a crosstab with a SQL Server stored procedure. The columns group the partcode by component.  The rows group by 2 dimensions (height and width), and the summary fields show the partcode and total quantity.

  • JDK installed in WindowsXP but without public jre. Problems!!

    Hello everyone. I have a few questions regarding a jdk installation. I never install a public copy of the jre mainly because I think it's a waste of space. But here are the down sides. I haven't been able to use the java plugin with Firefox, even tho

  • Rule based classification  errors in creating CLASSIFIER.THIS

    package body "STARDOC".classifier as procedure this is v_document     blob; v_item          number; v_doc           number; begin for doc in (select document_id, content from documents)      loop           v_document :=doc.content;           v_item:=