Ipod shows empty.

Ipod shows empty, but space is still shown used. And everytime I connect my iPod, iTunes stops working. Please help.

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the resulting numbers and we can decide what the best course of action would be from there.
B-rock

Similar Messages

IPod mini battery shows empty even after it charged for hours, but works?

i'm new to this, i borrowed someone's iPod mini and when battery ran out i put it to charge to my new macbook, charged for a few hours, lightning bolt showed all the while even if sometimes the indicator showed full and other times it showed that it was charging. now that i've disconnected it, it shows empty but it still works, can anyone help?
I read here http://www.vsa.cape.com/~danh/ipod.htm that this could happen, that the battery indicator could start showing full after 20 minutes... should i start panicking or not?
MacBook Mac OS X (10.4.7)

Hi,Emmerx tnx for letting me know about battery charging,i usually dont read manuals,so i didnt know that.,Look here https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/How-do-you-create-recovery-disk-with-Yog... maybe this can help you make recovery media. I know its 16GB,but there are alot of places where you can upload it(sky drive,google drive etc),but first you need create recovery media,i know i can order recovery media from lenovo,but maybe still someone be so kind and share their created recovery media for yoga 2 13.

Why is my 32G ipod showing a 28.55 capacity when it's almost empty?

Mi ipod is empty except for the OS and it shows a capacity of 28.55G when it's a 32G ipod. Is the OS 3.5G???

Because the iPod reports ths space using Base 2 while the 32 GBs is Base 10. If you convert 32,000,000,000 bytes in Base 10 to Base 2 you get approximately 28.90 GBs. Subtract the OS and you're down to 28.55 GBs.

Why won't my iPod work on iTunes or my computer? It shows up (not on iTunes) and the iPod shows connected but it has to be "formatted." And why are half my songs unable to play on it anymore? It just skips them!

I've read through several discussions and I've seen a lot of similar issues but none that were quite like mine. Every time I plug my 3rd gen. iPod nano in it shows it connected on the iPod screen and iTunes opens up but the device does not show up in iTunes. The icon on the iPod shows connected and gives the arrows circling showing syncing even though it still says connected. But it won’t show up in iTunes. It shows up on my windows computer but I can’t click it or make it do anything. It keeps saying “You need to format the disk before you can do anything.” And when I hit cancel it beeps and says "Location not available. Dara error (cyclic redundancy check)." As if I know what that means!! And I have 800 songs on it but they aren’t all on my computer and some are on my parents’ computer but I can’t get to that one. It shows it is a “FAT32” which I have no clue what that means but I’ve never noticed that before.
Windows "can't access the disk" and I don't know why. It gives me that notification if I try to check the drive or disk or device for problems. And if you click it on Windows it pops up a screen with formatting things (which I don't know anything about). And then it closes and says that it CANNOT format the device.
The iPod works almost okay when it isn’t plugged in, but I’ve noticed that half my songs won’t play. You click on it and it plays the next one in the album. And it isn’t always the first song in an album but random songs. And songs I listen to a lot. You can’t go back (you can only go forward and you can’t skip over the ‘missing’ song) or even click to select those songs. But other songs play normal, just not half of them that are on the iPod but all of a sudden no longer work. And I don’t know why. I have another 3rd gen. iPod nano that doesn’t have ANY of these problems. It hooks up, it doesn’t need formatting, and all its songs play. I don’t know what is wrong or what to do. I’ve tried re-downloading iTunes and everything. I don’t want to have to reset my iPod and lose everything.
I’ve tried locating the device in iTunes and it shows the iPod but it gives this weird symbol and I can’t select it. It’s like a white box with a box that is outlined in blue with six random icons in the middle. I’ve seen it before and it always means something is wrong or a file (which is where I have seen it before) is corrupted. And like I said I have a second iPod nano of the same generation and it does not give this weird symbol. Plus it connects just fine. It’s this one iPod.
I don’t understand what is going on. It worked just fine and then all of a sudden I noticed songs wouldn’t play so I went to plug it into iTunes and nothing has worked. I’ve searched discussions and none of the tips help. But I want my songs to play again and I want my iPod back.

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

IPod show in 'My Computer', locks itunes, wont sync

I have an iPod Classic 120 GB its about 3 or 4 years old (serial #8M836QEP2C5), has worked fine until I noticed it wasnt syncing in itunes (version 10.1). I'm not sure if it decided to do that before or after I updated iTunes.
iPod shows in My Computer
iPod shows in Safely Remove Hardware (but if I try and eject from there it says it's in use)
plugging in iPod wont auto load iTunes
Itunes is open and locks up when I connect iPod
Close ipod and have to pull out USB cord to disconnect (then it will say okay to disconnect)
when iPod is connected to USB it shows 'Connected' on ipod screen
restarted ipod with menu, center button
uninstalled and reinstalled itunes like apple said
stopped and started device like apple said
changed USB ports
..Nothing helps...
my pictures are still on my iPod but everything else is empty.
I was thinking of buying an iPod touch before this happened, now i just want to throw my iPod Classic into the road and watch cars run over it. Please Help.

the diagnostic test:
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 531s
iTunes 10.1.0.56
QuickTime 7.6.8
FairPlay 1.10.14
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.0.69
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number EFACDE6C10CEC8C8
Current user is not an administrator.
The current local date and time is 2010-11-23 18:38:30.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA , NVIDIA GeForce 6150SE nForce 430
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: ##############
** Device Connectivity Tests **
iPodService 10.1.0.56 is currently running.
iTunesHelper 10.1.0.56 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod classic running firmware version 2.0.1
Serial Number: 8M836QEP2C5
** Device Sync Tests **
No iPod, iPhone, or iPad found.

Please Help! Ipod syncing and copying with itunes but Ipod shows No Music

I don't know what I am doing wrong, I've got maybe 30 songs in Itunes, I connect the ipod, the ipod shows up in itunes. I have tried the following ways to get music from the library onto the pod
1. Right Click 'my pod' - select update songs
2. Top menu File - select songs on my pod
3. Right Click 'my pod' - select 'options' tick automatically update all songs,
4. As 3 but selected Manually update songs
In each instance the itunes thing goes through the motion of syncing, copying and updating etc
Then if you click on 'my pod' you can see in itunes all the music is there although you can not click on it or play it but the list is there.
However when I detached the pod it says No Music, No Playlists
Nothing
I checked the status and the ipod is empty
I don't know what else to do!!
Please can someone help
Many Thanks in advance

Your libarary doesn't just appear on any computer you sign into with your appleID. If your computers are on the same network, you can enable home sharing and access the other computer's library this way.

IPod shows up in "My Computer" but not iTunes...please help!

Ok so I have a 8gb iPod nano 5g and my computer is Windows XP running Service Pack 3. I have iTunes fully updated, I know this is so because I have completely uninstalled and reinstalled everything related to iTunes 3 times now. I have looked all over Apples support pages, scoured every possible solution to my problem, but nothing is working. Every time I connect my iPod to my computer, a message in iTunes pops up saying "An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect iPod and try again." Yes I have googled that exact phrase and looked at every website that offers solutions that don't work for me.
I know that the problem is not the cable, I have tried 3 different cables and none of them work. When I connect it to my parent's Toshiba laptop running XP SP3 and up to date iTunes, the iPod syncs and works perfectly. In addition, the iPod shows up in "My Compter" but when iTunes then pops up, it no longer appears...I am really at wits end and if I can't figure out what to do the next option is probably snapping this thing in half, because I don't want to pay the money to send it to Apple. Thank you for any help.

Look in Troubleshooting in the iPod 4th Gen User Manual pdf and follow the 5 R's. That should replace whatever in the iPod doesn't permit iTunes to see it.

TS4062 I can't sync music on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. Suggestions?

I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device. I've already spent way too much time trying to figure this out and it's driving me crazy! Thanks for any help you can offer.

This is correct. It will not show in finder. It is not an external storage device.
The music sync is one way - computer to ipod. The only exception is itunes purchases. Open itunes connect ipod, do not sync, click File>Transfer Purchases

I just got a new iPod shuffle, I connected it to my computer, synced my current iTunes, (the iPod shows the songs are on there). I charged it fully. I went to listen to it for the first time, and nothing :( no sound nothing, the lite is red.? plz help:(

Please help....
I bought a brand new iPod shuffle yesterday from future shop. I brought it home and plugged it into my computer and set it up with the iTunes on my computer....
on iTunes the iPod shows up, and synced...shows that my songs are on there. I charged it for at least 6 hrs. I went to listen to it this morning...and I gots nothing no music no nothing. the light blinks red twice and that's all I got. please help :(

Copy the music from Nano to computer by:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Then just sync to the new device
iTunes: Syncing media content to iOS devices and iPod

My ipod shows up on my desktop, but not in itunes 7.

Let me start out by saying I've never had any itunes + ipod probems before. Everything has run smoothly up until now.
Last week I upgraded my OS to 10.4.7 because I had been running on 10.2.8 since 2001 and itunes wouldn't let me download albums containing music videos. So I decided it was time for the upgrade. I also upgraded to itunes 7 and had been previously using itunes 6. This is when the problems started. Now whenever I plug my ipod into my computer with my firewire cord, my ipod shows up on my desktop, but not in itunes and I am completely clueless on what to do. No error messages pop up or anything. My ipod charges and that's about it. I tried doing the 5 R's, but none of that helps. I have a feeling it's itunes's problem and not my ipod's. I was thinking that maybe if I uninstall itunes 7 and re-install 6, everyting would work again; but I don't know how to uninstall itunes and I don't want to risk losing my library. I'd just like for itunes 7 to recognise my ipod and update it. Can anyone help me?

My iPod is a click wheel...I think that's fifth generation?
I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Report value is showing empty ,

Hi Gurus ,
i have i added new keyfigure in to query & its showing in the report also
But problem is the value of the keyfigure showing empty ,where as in the cube all values are 0.00
i want the keyfigures values should be 0.00
could any one help me out
Berry

Hi KP,
thanks for u r reply , i was doing in Development, if i made this chages as peer your direction surpress Zero,
If it is transported to Production if the valus are like 5845 (example ), is it diplays 5845 are Zero
Please let us know
Thanks in advance
Berry

How can I get my iTunes playlists to sync with my iP4? Everything else syncs fine but my iPod is empty!

How can I get my iTunes playlists to sync with my iP4? Everything else syncs fine but my iPod is empty!

Shouldn't be difficult but can help if you tell us what options you picked on how you want to sync your music as there is more than on option/way.

Show Empty Data

I hope there is anybody how could help me:
I create a Bex Query on EA Data (Account with same Key Figures) the Query is its based on a BPC Cube. In rows a only the account and in the columns are the key figures. Now not on all Account are values in the cube. I say in Bex Query that they should show Master Data. In Analyzer there are all accounts also the account without values in the cube.
In crystal I only see account with values. I use CR SP3 and integration Kit SP3. I set u201CShowEmptyDatau201D to True but nothing happened.
As second solution I create a formula in Bex with the value 1, take it in the columns but nothing happened in crystal I only see accounts with values in the cube.
I donu2019t know what I could do.
Second I had problems with the general connection of Bex and Crystal.
In the normal way I create a new report with the Sap Integration Kit Menue. What is the different between this way and the way with the crystal function new report and use a new MDX Connection. In booth ways with the same SAP System I get different connection parameters. Which way is the right way.
In addion if i set Show Empty Data to True, i get ask for the query variables and after it show empty data is set to false automaticly

Hello Ingo,
really??????
But in release notes of SAP Integration KIT XI 3.1 SP3 SAP shows it as one of the big new features. I couldn't believe that this is a fake?? Thats was the basement why we use it.
Is it in BO 4.0 possible to use only Crystal Reports Designer (which Version?) and a BW System with the Integration KIT?? Like in XI3.1??
We only use Crystal Reports Designer with Integration KIT and the Integration KIT in the BW System. Is there an Integration KIT of BO 4.0 with transports for the BW System?
I couldn't believe that it is not possible in XI 3.1. I stay in contact with the SAP and then im really angry because in the documnentation there is the option listed.

Apple, Pfft!!! (Another iPod shows up in Windows but not in iTunes post)

How in the world does Apple market the iPod, etc... as if 10-year olds and grandmothers can operate the technology, when having viewed these message boards for 10 hours yesterday, it seems as even the tech savy people who can make a computer out of two pieces of bread and a piece of bologna have to wrack their brains to make it come a step closer to actually working. Blah!!!
Anyway, the problem that I am having is the problem that a lot of other people are having and seems to be the main theme at the moment.
I am unable to have iTunes recognize my iPod. My PC will once-in-a-blue-moon recognize the iPod as its own drive in Windows Explorer, but mostly all I get is the big freeze. Every time I connect my iPod to the USB, all of the programs cease to operate until I unplug it. I am not having memory problems either.
Here's what I've done. I have updated the iPod Updater to the 06-23-06 version. I was able to get it to update the software on my 60GB iPod. I got all excited only to then have it give me several error messages 1) an internal manager error and 2) some unable to dock or something like that (sorry I'm not at my home cpu.) Once while I was doing the 4-hour battery charge my iPod came up in the source list in iTunes, but I have been unable to have it be rerecognized.
I've unistalled and reinstalled iTunes and the iPod Updater over 10 times and have gone through the 5 Rs as well as all of the steps on
http://docs.info.apple.com/article.html?artnum=93716 (My iPod shows up in Windows but not in iTunes)
I've even messed with msconfig and tried a whole bunch of other suggestions. It doesn't seem that Apple has a fix for this problem and we are all left with paperweights.
Any suggestions?
Thanks you all and condolences to everyone who is going through this same problem. I swear what happened to plug and play. Pfft!!!

You know they are probably going to search me out and crash my computer for posting this but i had the same problem with iTunes. i spent hours, went through the 50000 "R's" and changed my settings and formatted and reset and reloaded and then i tried Realaudio. it found all the songs i had loaded into iTunes and put them on my shuffle first try. you can get Realaudio at <www.real.com> Let me know how it works...

Ipod shows empty.

Similar Messages

Maybe you are looking for