Ipod shows error message

i paused my ipod and sat it down for about a half an hour. I returned to use it and when i pressed play it would not play and the screen was frozen. I restarted my ipod and now when i turn it on a sign comes up with an error message that says www.apple.com/support/ipod and then it shut off. I plugged it into my mac and it just keeps rebooting itself and return to the same message and then rebooting again.

i had the same problem. i saw a great video on how to fix it and it worked for me.
the guy who posted it also offers free advice. check it out. good luck.
http://www.youtube.com/watch?v=1KoWw9PZv50&feature=channel_page

Similar Messages

How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

IPod Nano Error Message (-48)

I've just got my NEW iPod Nano (Red 4GB) out of the box and when I connected it to iTunes I keep getting the Error Message "Unable to update iPod Bob Error Message (-48)."
Despite the (-48) Error Message the iPod does seemingly update Songs/Photos etc.
I have got a 60GB Video iPod and a new Black iPod Nano (8GB) and have no problems with either of them.
Does anyone know what Error (-48) is????
Thank you in advance!
Bob

I have just got back from the Regent Street Apple Store - the trip took 5 hours (I live way outside of London) and cost £35 in fares (thanks Apple!)
I met with a guy from the iPod Genius Bar - and there is indeed a "problem" with Error (-48) which Apple are fully aware of. I took my iPod Nano (4GB Red) which DOES have this problem and my iPod Nano (8GB Black) which does not PLUS my iBook so the guys at Apple could see for themselves the problem I am having.
It seems they are aware of the problem - but could offer NO solution at this time and Apple are definaitely working it! They took data dumps of my iTunes / Mac Configuration etc. and details of both Black and Red iPods (serial numbers etc.)
They were very helpful - and advised me to keep the Red 4GB and sit tight until the Update/Patch to solve the problem is available from Apple.
I was one of MANY turning up at the Genius Bar that day with the SAME problem!
So - there are no quick / sure solutions to this one - I guess we have to wait for Apple to release the fix.
Bob

How to show error message in a report program

Hello Guys,
I am making a report using smartforms. I am successful in showing data but problem is if if i put a value in parameters that does not exist is database, the smartform runs and related fields shows as empty fields. But the form is running. I want to show error message if the parameter values dose not matches with the database values. The message will show as Document not exists
So i used related error msg here like
if sy-subrc ne 0.
          message e357.
           endif.
But it is not working for passing values to smartform. It works if i use in classical report. Plz help me on this issue.
Thanks,
Rosaline.

>
Rosaline. wrote:
> Thanks all for reply. Should i have to use message before call function 'SSF_FUNCTION_MODULE_NAME' ? I tried it but not working.
>
>
if it_final[] is not initial.
>*             if sy-subrc ne 0. ---> "Remove this condition check, it not required
>            Message e000(8i) with 'Parameter value not found'.
>            endif.
> *            endif. ---> "remove this
>
Hi,
Sy-subrc doesnt need to be validated here, remove that If condition and check again.
Regards,
Karthik D

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How to show error message on page #NOTIFICATION_MESSAGE#?

Hi,
Is it possible to show error message on a page, where apex substitutes #NOTIFICATION_MESSAGE# at page template, with a javascript call? My requirement is to report error messages which i get from ondemand process, these on-demand processes were called from my javascript code. If any error message is returned by on-demand process, as of now, I'm reporting the error message to user by javascript based alert dialog box, but it would much better if i could keep the error message reporting by my application in a consistent manner. So any suggestion please?
-Krishna

Hi Roel,
Thanks, jumping in for help.
I tried your given code, i found that the page html source doesnt has any element with a name '#messages'. As per my understanding, its the apex engine which checks for any error, if found it shows it by adding an element id '#messages', but here on my requirement its not the apex engine which has detected the error, its my functional logic which wants to report a message. On a normal and error free page condition, we usually dont find '#message' element. I'm curious on how apex inbuilt engine is reporting an error to a page?

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

Show error message when Install SM7 in step 4 execute Service

Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

When re installing iTunes on window it shows error message: Service Apple mobil divice does not start

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

So where is LR trying to copy the files? Check your destination in the Import panel at the right.

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

TS4585 When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup

When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup

That usually means that there is something wrong with the backup and it cannot be used. You can try restoring the backup again, but if you continue to get the same message all you can do is restore to a different backup, if you have one.

Show error message with multilingual in ADF Jdeveloper 10g 10.1.2

Hi
I want show error message with multilingual in my application, but i don't know how to do.
Can you give me some solution.
I live in vietnamese.
Thank a lot.

When i using code
ResourceBundle bundle = ResourceBundle.getBundle("MyResources",Locale.ENGLISH);
String key = "hello";
String s = bundle.getString(key); // Hello
key = "bye";
s = bundle.getString(key); // Goodbye
then there is error follow
java.util.MissingResourceException: Can't find bundle for base name MyResources, locale en
     at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:804)
     at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:773)
     at java.util.ResourceBundle.getBundle(ResourceBundle.java:538)
     at mypackage1.Application1.main(Application1.java:21)
Can you show where error or you have some code about that issue, you can show me

Download error under apps. After following download steps multiple times still showing error message.

Download error under apps. After following download steps multiple times still showing error message.

Hi There,
Kindly try the below mentioned links.
Creative Cloud Help | Download Error in Apps tab of Creative Cloud Desktop Application
Creative Cloud - Download error - stubborn error
Thanks,
Atul Saini

Ipod shows error message

Similar Messages

Maybe you are looking for