Ipod shufffle 1st gen not working

Hi...
I have a 1st gen Ipod shuffle.I was listening to music and it suddenly stopped working. It won't turn on (lights do not blink) and when connected to the PC the light doesn't even blink. What do I do?
Pls help

If the lights (front and back) do not come ON when you connect it to power, it is likely to be a hardware problem.
If the shuffle ran out of power when you were listening to it (and that's why it "suddenly stopped working"), and now will not charge when connected, it could be a problem on the shuffle's built-in USB plug.  It tends to become worn out (or damaged) over time.  It's probably the most common failure point for the original white plastic shuffles.
If you recall that the battery had a good charge when it stopped working, then the problem could be on the shuffle's logic board.
You should rule out a problem with the USB port on the computer.  If you are using a USB hub, try a direct connection on the computer's port, with other USB devices disconnected (you can leave standard keyboard/mouse connected).  If you don't see the shuffle's light come ON, try something else on the same USB port (preferably something similar like a USB flash drive or port-powered external drive) to confirm the port is working properly.  If you have a USB power adapter, you can also try connecting the shuffle to it.
If you can rule out a problem with the USB port, and the shuffle's light does not come ON when connected, it is likely to be a hardware problem on the shuffle.

Similar Messages

  • Ipod Nano 1st gen not working

    Hello all
    I have a Ipod nano 1st gen 2gb. I can restore it, reset it with menu select key, but everytime it starts it loads to the lanuage screen and i can not click to get further into the ipod, it use to work before i upgraded the firmware to the new 1.3.1. is there away to downgrade back to like 1.1.9. I am running vista 64 bit so i cant run the 32bit restore program to try that. If there is anythign anyone can think of that will be great. Yes i have reset it via the menu key and select key like 1000 times...

    I downgraded the nano from 1.3.1 to 1.1.1 then down to 1.0 and then back to 1.3.1 and still the same thing, no select function upon the Language Screen. Anyone have anything else i can try?

  • I have a iPod Touch 1st gen, not working.

    I have a iPod Touch 1st gen but it wont turn on or anything and wont do a thing.  How am I to go about this, is it best to take it to an apple shop?

    First try the troubleshooting here.  If unsuccessful than an appointment at the Genius Bar of an Apple store is in order.
    iPod touch: Hardware troubleshooting

  • IPod Nano (1st gen) not working... seems to be dead...HELP!

    Havent used my iPod in awhile. Went to plug it into computer to charge and got a screen that flashed the apple logo a few times and then went to a screen with a charging symbol but not the normal one (had gray plain background and lack symbol). Computer does not reconize iPod. I tried many of the things apple suggests but it has not worked.
    Message was edited by: joeyman500

    Have you tried Resetting your iPod (hold down the menu and center keys for 6 seconds) while it is connected to power? You may have to try several times.

  • IPod Touch 1st Gen Not Charging/Being Reconized

    As the title says, my iPod Touch (1st Gen) will be reconized bu any computer or charge all in itself. I tried plugging it into multiple computers, nothing. I tried plugging it into the wall adapter...still nothing. It doesnt not get the charging symbol when I plug it into either places. The is actually the second time it happend. The first, well my cord was so worn, I guessed it was the cord and replaced it, worked just fine. The replacement happend very recently, like maybe 1-2 months ago. So right now, I would guess it was the cord, but its brand new. I have tried toing both a soft and hard reset of the iPod, nothing worked. If anyone could please help me, it would be highly appreciated.

    - See if placing  the iPod in Recovery mode will allow a restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Then make an appointment at the Genius Bar of an Apple store.

  • Ipod nano 1st gen (not recognized by iTunes and won't resotre)

    My ipod nano 1st gen has been working fine up untilthis afternoon..I plugged it in as normal while running iTunes and I wanted to remove some music files t add new ones and all of a sudden it wasn't recognized by itUnes anymore, you can't resotre it on iTunes or manually and whenever I plugge it in the itunes shut down..
    It was working fine before that, I was able to add and remove songs on it..I also have Ipod Touch 5 that works fine no problems and UBS ports are ok as well (all other ubs devices work on them). I have the latest, newest version of Itunes instaled
    HELP
    Thank you

    Hey moni8181,
    If you are having an issue with your iPod nano not being recognized by your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Ipod nano 1st gen not syncing

    My ipod nano 1st gen is not syncing properly. When I plug it in and itunes starts up, it begins the syncing process, but gets stuck midway through. I have it set to only sync checked songs and a specific playlist. Also, it still has enough memory. Cannot get it to sync and stays busy so long i cannot eject because computer is busy syncing! I've also tried to reset and restore, but it wouldn't restore because it was busy syncing!! Help please!

    I have the same problem. I have an Ipod Nano 1st generation that won't sync also. I tried downgrading Itunes version and that didn't work. I installed the latest Itunes and firmware but I'm still having the problem.
    The only solution I have found is to reset the ipod, then do a restore in itunes then run the sync. It works then once and you will need to do it again everytime you sync otherwise it won't sync. It is rather disapointing considering that the Ipod is supposed to be a premium product.

  • Ipod nano (1st gen) not charging/not showing up on computer or itunes

    I recieved a 2GB ipod nano (1st gen) as a gift back in December 2005. It's worked fine until recently. Yesterday, I tried to charge my ipod. However, when I connected my ipod to my power adapter to charge it nothing happened. The charging symbol didn't even show on the screen. So then I tried plugging it in to my laptop computer. Same result: nothing happened and worse still, it didn't even show up on My Computer or in iTunes. I then tried connecting it to our regular computer. Same result as the laptop and still no charging icon. I tried my 2nd generation nano thinking that maybe something was wrong with the USB cable or with the power adapter but it worked fine with everything. I also tried another cable. But still nothing worked. I've tried the 5 R's thing but it didn't work. I even tried leaving my ipod alone for awhile to no result. Finally I tried putting it into Disk Mode and that's where it is now. I've tried to run through the steps again with this but it didn't work. So now it's in Disk Mode and it needs to be charged but I don't know how to do it. I'm starting to think that I just need to get the battery replaced. Unless someone else has a fix that will work?? Please help!!

    It sounds like the port or cable is having a problem. First try a different cable.
    If the cable doesn't fix things then try resetting the PMU (Power Management Unit) then see if the iPod will show up.
    MJ

  • IPod Nano 1st Gen not connecting to my computer

    My friend's iPod Nano 1st Gen won't connect to my computer (i have previsily added songs to it since last month) and now my iTunes won't show that ipod on my devices lists (I did NOT update iTunes because of the problems other people were getting)..... it will charge on my computer but WON'T sync....... WHATS UP WITH THAT???
    THANKS IN ADVANCE TO THOSE THAT HELP.

    Could be any number of reasons.  One of them just may be your refusal to update iTunes.  Just because others are having issues does not mean you'll have them! 
    iPod appears in Windows but not in iTunes 

  • Ipod Touch 1st Gen not starting up past the apple logo

    When I start it up i see the apple logo for about 15sec then it turns off. I've tried putting it into safe mode by holding the Power and Home button for 30sec but all it does is turn on and off twice then nothing happens.
    Any ideas on how to fix this?

    Hi,
    Would you please share you solution as I'm facing the same with my 1st Gen iPod Touch.
    PS: iTunes does not detect the iPod either.
    Thanks.

  • Ipod shuffle 1st gen not recognized by pc

    Okay, so I have a ipod shuffle 1st generation that seems to hae no songs in it and it is not recognized by my pc or it does but I can't access it. On itunes after I plug it in my pc it says "iTunes has detected a damaged iPod . You may need to restore this iPod so that it can be used with iTunes. You can also try disconnecting and reconnecting the iPod" and after restoring it it says "The iPod could not be restored. An unknown error occurred ( 1442)". Maybe is it because i took it off from the usb port without using the proper way. Is it possible to to make it work again?
    It is running version 1.1.5 or ios 1.1.5 cuz idk and I have a windows 8 pc.

    Hi raresvez,
    I'm sorry to hear you are having these issues with your iPod shuffle. If you are having issues restoring your iPod, you may want to double-check the troubleshooting steps outlined in the following articles:
    iPod shuffle troubleshooting and service FAQ - Apple Support
    Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
    Regards,
    - Brenden

  • Why is my wifi on my ipod touch 2nd gen not working?

    Can someone help with the wifi on my ipod touch 2nd Gen? Yesterday it suddenly stopped connecting to anything wifi. No settings were changed. The only thing I did was go to itunes for the first time in well, forever. I always use it on my computer to go in itunes, not my ipod. Anyway, I'm pretty sure I could still get on Safari after that but I don't really remember. At some point in the evening it stopped connecting. I can't get on Safari, my mail won't refresh, it would connect to the app store, nothing. Sometimes a message does pop up saying there was a problem connecting to the server. I can't figure this out, internet on my computer is running perfectly fine. My ipod wifi is on, airplane mode off. When I go into my settings it shows my network and that it's connected. I haven't connected it or synced it to the new itunes. I actually haven't downloaded the update yet. Ipod is up to date though without the new sync. Can anyone help me out? I'm very confused.
    Thanks

    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Ipod mini 1st Gen not seen by iMac or iTunes

    Hi,
    I've looked through the other threats and reviewed and checked the advise given such as check the USB port; Done - iPhone & iPad work fine with th same port and cable. the iPod mini just flashes 'Do not disconnect' its fully charged and plays my music fine through a number of devices.
    I cannot get the iPod mini to be seen by the iMac on 10.7.2 or on iTunes 10. I dont have access to a firewire cable and reluctanted to buy one on the chance that may not work either.
    First question is the iPod mini on version 1.4.1 able to link with iMac and iTunes 10 and if so how? Thanks
    Stephen

    I'm having the exact same problem, have tried everything listed on this page and the device manager steps. Nothing extra comes up when I click on "show hidden devices" the exact same listings are still there. And there is nothing indicating an ipod mini in the USB section in device manager or "unknown device" or anything.
    The other user said "thank you yes have tried this and message is as follows: windows cannot start this device because its configuration information (in registry) is incomplete or damaged (code19)" - but nothing like that is coming up on mine. None of the R's make anything different. Am I doing something wrong? Can anyone give me a hand?
    Ipod Mini   Windows XP  

  • IPod Shuffle 2nd Gen. not working, music plays but doesn't sync\

    Hello,
    I have an iPod Shuffle 2nd Gen since a long time and it always worked perfectly. But now it has stopped working well. It has music stored inside and it plays it, it evencharges from the pc, but doesn't sync in iTunes, nor it shows up on Desktop. On iTunes the message in Italian says idt couldn't be identified and to reconnect the iPod and retry. I tried the Reset Utility but it says my iPod isn' supported even if it is a 2nd Gen iPod. The only positive thing is it shows up on System Profiler.
    I tried also turning off the iPod for 5 seconds and turning it again on, but the issue is still there.
    Have you got any suggestions?
    Thankyou

    Actually it turns out I can't even add to it. It claims it's synced to another library (which apparently is true, being as it was last used with my Macbook Pro). Somewhat new question, How do I combine the two libraries, as it's all mine, just on two different computers, one of which doesn't work unless it's in Hard Disk Mode.

  • IPod Touch (1st Gen) not syncing with iTunes 11.0.4

    I own an iPod touch 1st generation and for some reason it won't sync music properly with the latest version of iTunes. This problem has been going on for about 6 months. I have found some way around it but it involves wiping the iPod entirely and then syncing it with my iTunes. This, however, is a very long process and I want to know if there is a solution. I do understand that this is a very old iPod (c. 2005) but I've had it from new and other than this problem it works perfectly fine and has a decent battery life. I don't really care much for apps I just want to be able to listen to my music on the train without having to fork out for a new iPod or iPhone.

    I would try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Maybe you are looking for

  • Major crash happening with icloud

    three visits to the genius bar and 3 phone calles to senior advisor and no answer to my problems Whats wrong with this picture. having a meltdown on iphone and imac at same time-I cloud people supposedly are getting backto me but 2days gone by and no

  • Passing data from one bsp application to another

    Hi, I have few queries that most of you would have done in ur projects: 1. I want to pass data from one bsp application to another: eg based upon selected row of table view which populates material no and descriprion to another application which open

  • Can ID auto-add crop marks?

    This is something I have always done manually and occured to me that maybe there is some way of it doing this automatically.  I know about the check box to automatically put crop marks on the 4 corners of the entire layout.  Is there a way to also pu

  • How to return to previous page

    I have a form A. Once filled out, they should subnmit to insert the data into a table. However, they can fill out the form and not submt. There is a icon in the upper left that will take them to another form B (comments) to fill out. If they submit f

  • Layer Naming in Adobe Draw

    Why can't you tap and hold to rename a layer in Adobe Draw? Why have names on layers at all if all the layers are the same name? You know people want layers, you support them when you use "Send to Illustrator" but you don't give the user the ability