Ipod shuffle 512mb 'One of the USB devices attached to this computer has m'

Hello, my ipod shuffle 512, which was working fine, now prompts following error message on any pc i plug it into 'One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it'
Can play music that's already on it and it takes a charge but is not recognized by itunes or windows xp
Out of warranty, any ideas appreciated, thanks!
dell Windows XP

Hello, my ipod shuffle 512, which was working fine,
now prompts following error message on any pc i plug
it into 'One of the USB devices attached to this
computer has malfunctioned and Windows does not
recognize it'
Can play music that's already on it and it takes a
charge but is not recognized by itunes or windows xp
Out of warranty, any ideas appreciated,
thanks!
Buy a refurbed one from online Apple Store... 1GB 1st Gen is $49, 1GB 2nd Gen is $59...

Similar Messages

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
http://support.apple.com/kb/HT2292
http://support.apple.com/kb/TS1369
http://support.apple.com/kb/HT1923
http://en.kioskea.net/forum/affich-17997-ipod-not-detected

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.

I connected my sons Ipod Touch to my pc and it worked fine. Now, when I try to connect my iPad the following message comes up: One of the usb devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.
I checked the cable. It surely is not the cable. If I connect the iPod again it works fine. If I use the same cable with my pc and ipad at work or my other son’s laptop, it is working perfectly. It is only on my laptop where the iPod was connected. Something tells me it got something to do with the drivers that went corrupt or something when I connected the iPod.
I searched the internet and I see a lot of people gets this message. Still no solved answers yet. Is there a place where I can download the drivers again or any other suggestions?
Windows 7 and iPad 2
Kind regards,

I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
This article was one of the ones you linked to above in your initial post
http://support.apple.com/kb/TS1369
Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears? That appears to be your situation.
Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again. If you can get it to work again initially, before doing anything else, try the following. Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. By default, the checkbox for Enable disk use should be unchecked. If so, check it and Apply the change. See if that makes any difference.
(If Enable disk use was already checked, try unchecking it and Apply the change. Basically, set it the "other way" and see if there is any improvement.)
NOTE: When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
If the disk use change makes a difference, that may provide a clue about the actual cause.

Computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

i have an ipod nano 7th gen and when i plug it in for itunes my computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

MuVo V100 "One of the USB devices attached to this computer has malfunctioned&qu

My V00 freaked out yesterday when I plugged it into the USB port on my PC. The machine ended up freezing and I had to do a hard reboot. Post reboot XP gives the message "One of the USB devices attached to this computer has malfunctioned" and the player wasn't recognized. I did the system clean up and reboot recommended and the player itself is working normally again but XP still doesn't recognize the player. The V00 doesn't have any drivers I can locate so I'm stuck with a music library I can't update. I stopped at the office this morning and my laptop has the same issues. Aside from buying an IPod what else can I do. I've reinstalled the entire USB structure on my machine and all my other USB devices are recognized and working normally.

Try disconnecting the other USB items before connecting the player. Try connecting the player in a different USB slot. Connect the player directly to the USB slot, not to an extension cable or a hub.

IProblem: "One of the USB devices attached to this computer has ...."

Hi, I'm having a problem with my iPod.. when I connect the iPod this message pops:
"One of the USB devices attached to this computer has ...."
I've searching a similar problem in the forums, and I have found many discussion about it, but any of them can solve my problem.
Well, all began like this, the iPod was attached to the computer AND showing on iTunes, suddendly the screen shines I DID NOT Eject it (the iPod was on its menu, not in the Do not disconnect screen) so I thougth it was ok... but the iPod was still showing on iTunes, so I ejected.
The iPod remains connected for about an hour then I disconnect it without any problems. The problems began when I connect the iPod again (2 hours later), the message "One of the USB devices attached to this computer has ...." pops, now my computer can't access the iPod (it isnt on My Computer or iTunes)...so the first thing I did was search a similar problem in the forums, I've found that exact problem in many discussions, and I've tried everything they say:
1. The Five R's
2. Uninstall and Reinstall iPod software and iTunes
3. Enable manually disk mode (still not recognized)
4. Check if the USB was low powered and Uncheck the "Allow the computer to turn off this device to safe power" (it isn't low powered 'cause the iPod was working with that USB)
No matter what I did, the iPod is not showing on My Computer, I hope you can help me out, tomorrow I will try on a different computer and a different cable
PD: Sorry for my poor English, I'm from Peru.
AMD Athlon XP 2400+ Windows XP Pro

I've got the same issue, looked everywhere, no solution seems to work.

Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Error code 43 with message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'.

i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!

Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

G31TM-P21 One of the usb devices attached to this computer has malfunctioned and

Just bought the G31TM-P21 motherboard and installed it with a E3200 proc. Whenever I plug in a USB device in one of the four ports on the back panel I get the message:
"One of the usb devices attached to this computer has malfunctioned and windows does not recognize it. For assistance in solving this problem, click this message."
After clicking the message I get a window with:
"One of the usb devices attached to this computer has malfunctioned and windows does not recognize it." with a tree of USB Root Hub (2 ports) with Unused Port and Unknown device under it.
If I go to Device Manager nothing appears to be uninstalled but if I expand the USB I do have a single instance of Unknown Device among the root hub and host controller. I'm running windows XP home 32 SP3.

Quote from: Wonkanoby on 14-November-09, 18:21:00
what device
what is usb in your set up
Any device, keyboard, mouse, printer, etc.

One of the USB devices attached to this computer has malfunctioned and ...

Hello all, I have the same problem with one of our members here and also would really appreciate some help. I have a iPod video since last December and it worked just fine. Yesterday, I took some of the data out from my iPod with another computer and everything ran fine also. But when I connected my iPod to my laptop, it said "USB devices attached to this computer has malfunctionedand Windows does not recognize it". I tried to connect that to another computer and same message popped out. I have charged my iPod, it usually took few hours to recharge the battery but this time, even though it was charged for more than 6 hours, it is still not fully charged. The iPod works fine (it plays all of my current uploads on it) it's just that it won't communicate with my computer so I can't update content and get my data out of my iPod.
I have tried to updates iPod in a disk mode, connect and reconnect again but it still doesn't work. I very much appreciate it if anyone can help. I can't afford to lose the data I have in my iPod. Thanks.

I'm not really up on the complexities of the Windows OS but try this tip I picked up a while back, hopefully it might help.
"USB Device not Recognized in Windows"
1. On the Start menu, click Control Panel.
2. Double-click the System icon.
3. Click the Hardware tab.
4. Click Device Manager.
5. Scroll down the list of devices to the Universal Serial Bus controllers
6. Click the plus icon next to the Universal Serial Bus controllers.
7. Double-click one of the indented USB Root Hub entries.
8. Click the Power Management tab.
9. Deselect the "Allow the computer to turn off this device to save power" option.
10. Click the OK button at the bottom of the window.
11. Restart the computer.

Okay every time i plug my ipod up to my laptop a message comes up and says one of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. Can someone plz help me ive done everything.

I really need assistance/help with my ipod because it was working fine one day. Then the next day i decide to put more music on it then this message came up, and ive tried all the troubleshooting stuff and different links to help but still no success. But theres one thing i havent tried yet someone told me to buy another Apple charger and wall plug in to see if that works other than that i need help because i went to settings and erased everything off my ipod to see if that worked and it didnt so all my stuff is gone....Yeah i was ****** but plz help me!

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Error: "One of the USB devices attached to this computer has malfunctioned"

I have been trying to troubleshoot this on my own for awhile. I am currently using a 20GB iPod that has a touch screen and uses a dock. The unusual thing about my problem is that my original iPod's battery eventually wore out and, since it was out of warranty by this time, I chose the option to pay Apple $59 for a replacement. When I received my replacement, I would get this error when I loaded Itunes and tried to connect my iPod via the dock. When I do, my iPod just keeps flashing the "do not disconnect" screen and this will go on indefinitely. Windows does not recognize the iPod except for that one error message. I am now wondering if it is possible that my replacement was defective (a refurbished iPod).
I thought that my new iPod might be a different model from my original so I tried to connect it without the dock, but I got the same error message in Windows (I am using Windows XP).
I have been told that I need to keep the I:\ drive open for the iPod... I do have an I:\ drive called "Removable disk" which may have been for the iPod, but I don't know how to get rid of it.
I called Apple and they essentially said "tough" when I said I wanted to replace my defective replacement. I do not want to pay another $59... and its not a battery problem either.
If anyone can help, I would be grateful.

Same person here, my other account was disabled for 'security reasons'.
So does anyone have any ideas? I think now I just want to send my iPod in for a replacement, but there is nothing wrong with the iPod's hardware... I think it's just corrupt or doesn't work with my dock. Is it OK if I send it in for this reason alone for a new/refurbished one?

"One of the USB devices attached to this computer has Malfunctioned..."

Has anyone had this message appear before. My 5th gen iPod was working fine yesterday, now windows is telling me it is not recognized and the device has malfunctioed. I tried the "menu-middle" reset, re-installing the software, I can't re-set my whole i-Pod since I cannot connect!

i have a problem, i used to own a nano but i recently purchased an ipod video, i installed the new itunes cd and it supposedly installed, it says that the device is not recognized no matter which port it is in. i did everything and now the screen is frozen on the about screen stuck at 4:29 Est and it is 5:06 now!! if u have any ideas let me know, oh and what is the warranty on this thing, may have to trade in because the disk didn't install correctly at all...

Ipod shuffle 512mb 'One of the USB devices attached to this computer has m'

Similar Messages

Maybe you are looking for