IPod shuffle cannot be updated. cannot read/write

Hi there,
I recently reformatted my Windows XP machine and am now having problems connecting my iPod shuffle again. After installing iTunes 5 and re-associating my iPod shuffle with this computer (that all worked fine), I am now having problems adding songs to the iPod.
When I drag a song onto the iPod, I receive the error: 'The iPod "shuffle" cannot be updated. The disk could not be read from or written to.'
I tried restoring the iPod shuffle with the 9-06-2005 update and that worked fine. My iPod has already been updated to the latest software. I also tried uninstalling iTunes 5 and re-installing after a couple reboots. Then I tried removing the entries in the Device manager for the iPod (both "Disk Drives > Apple iPod USB Device" and "USB Controllers > USB Mass Storage Device"). When I reconnected the iPod, Windows recognized the device and reinstalled the drivers but I'm still having the same issue. Additionally, I've tried every one of my USB ports to no avail.
If I try to enable the shuffle for disk use in iTunes, I also get the same issue. I'm not sure what else to try. The computer and iTunes seems to recognize the iPod shuffle just fine; just reading or writing to the shuffle is a problem. Any suggestions?
Thanks,
Isaac

Well, I reformatted the drive (FAT32) and then did a Restore using the latest update (9-23-05, even though today is 9-22-05). iTunes saw the shuffle as a new shuffle and let me name it and then it started to auto-fill the drive. While trying to copy the first song, it says: "The iPod 'Shuffle' cannot be updated. The disk could not be read from or written to."
I tried the iPod shuffle on two other computers and on both of them it works fine. So, I thought it was my primary computer that has the problem. I bought a new USB card, and tried updating the USB drivers again. But, I have the same problem regardless of using the motherboard's USB ports or my new USB card's ports. sigh
Any other ideas?
Isaac

Similar Messages

  • My ipod shuffle cannot be restored not by the itunes nor by the reset utility it tolds me that it is in recovery mode , i tried to make every thing to resolve it but i can not what can i do ?

    my ipod shuffle cannot be restored not by the itunes nor by the reset utility it tolds me that it is in recovery mode , i tried to make every thing to resolve it but i can not what can i do ?
    notice : when every time try to reset it by the retore utility it tolds ( your i pod obtaining information from your ipod)
    and when i tried to restore it by the itunes it tolds ( there is an unknwon error num 1415)

    Now the iPod is unusable with the Recovery mode loop. The full error below:
    "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
    I can see my IPOD under devices on the left pane of iTunes while the error displays. But when I click OK, the IPOD disappears under DEVICES as does the DEVICES category.
    and also when i remove my ipod from computer it isn`t light any light never the battery show

  • My iPod Shuffle won't update or restore.

    My iPod Shuffle won't update or restore when I put my iPod in it says iPod Service Error or Can't Mount iPod. Can someone please help me?

    The same thing happened to me, I called Apple (Is your Ipod still have the free 90 days free phone call?) they told me it was my battery. They said they think I should buy a new one. I did not. I didn't think it is really my battery. Are you connections clean? Have you tried different USB hubs? I've heard the USB's in the back tend to give off more power.
    Hope this helps.
      Windows XP  

  • IPod shuffle cannot be read

    Hi!
    Major problems with my (now second) iPod shuffle. ITunes says it cannot read it (but it does detect it and shows it with my name). I have deinstalled iTunes a thousand times, deleted old iTunes fragments from my hard drive, reset my iPod a million times etc etc. Still the same problem. Does anbody know how to solve this problem? Thanks.

    Big Show,
    "ITunes says it cannot read it (but it does detect it and shows it with my name)"
    So it appears in iTunes?
    Check to see if the iPod is seen in Windows Disk Management.
    Right-click on My Computer on desktop, choose Manage to open Computer management tool,then click on Storage, then Disk Management.
    Is the iPod appearing there?
    Generik
    Dual 2.3 GHz PowerPC G5   Mac OS X (10.4.8)  

  • When syncing my iPod photo it transfers 2 songs then gives error message ' cannot read/write disk' what wrong?

    Can someone tell me whats going wrong when I manually sync my iPod with computer only 2 songs transfer to my iPod then I get error message ' unable to read/write disk ' the 2 songs are transferred to iPod and I have to keep starting the process over again, what can I do?

    First, try shutting down (powering off) your computer and resetting the iPod
    http://support.apple.com/kb/HT1320
    Start up the computer, and connect the iPod to a direct USB port on the computer, if you have been using a USB hub.  If there are other USB devices (other than standard keyboard/mouse) connected, you may want to disconnect them, as a test.
    If that does not help, or you already did that, it is possible that the iPod's hard drive has become faulty.  It is also possible that the hard drive is OK, but there is data corruption that is making the iPod's storage unreliable.
    If the problem is not resolved, you should probably do a Restore on the iPod in iTunes.  The Restore button is on the iPod's Summary screen in iTunes.  This will erase the iPod, reinstall its software, and set it to default settings.  If the cause is data corruption, the Restore (erasing the storage) should fix the problem.  However, if the cause is a hardware fault on the hard drive, it will not help; the Restore may not complete successfully, which will leave your iPod inoperable.

  • My IPOD shuffle cannot be udpated

    Every time I try to load a song into my IPOD shuffle I get the following error message:
    "The IPOD cannot be udpated. The disk could not be read from or written to."
    I have downloaded the updates, reset the IPOD, and all goes well until I try to drag a song from my hard drive onto the IPOD and I get the error message.
    Any thoughts?
    JETERBOY

    Now the iPod is unusable with the Recovery mode loop. The full error below:
    "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
    I can see my IPOD under devices on the left pane of iTunes while the error displays. But when I click OK, the IPOD disappears under DEVICES as does the DEVICES category.
    and also when i remove my ipod from computer it isn`t light any light never the battery show

  • Error message Ipod shuffle cannot be synced. required disk cannot be found.

    I just bought the ipod shuffle. I loaded about 110 songs. Then the next day I wanted to load just 9 more and it wouldn't let me giving me the "cannot be synced. required disk cannot be found. Please answer. This is frustrating.

    I remember getting that msg periodically when I got my shuffle, but now it's extremely rare [I've not seen one in more than two months].
    I donno what causes it, but what always worked for me was to eject the shuttle, un-dock it, quit iTunes, launch it again, cycle iPod power (turn it off if it's on, and on if it's off) once or twice, put it back on the dock, and voila!

  • Sync problems after switch from Windows to Mac; cannot read/write error msg

    I'm not sure if this is a hardware or software issue.
    I recently switched from a PC to a Mac. To move my iTunes files (50GB) I simply dragged and dropped them from my external HD to my new computer. I know that Apple does not recommend this process, but when I needed to move my library between drivers earlier this year, it was the only way I could do it without getting an error message that killed the process.
    Moving the files seemed to be a success. Everything appeared in iTunes, I was able to play the music, etc.
    I then tried synching my iPod (Classic 160 GB – I think 5th gen, it’s about 3 years old) on the new computer. I got some message that said you can only have one iPod per account and that I would have to wipe the iPod before syncing. I let it do that.
    Here's where problems began:
    With a few gigs to go in the sync I got a message that says something to the effect that iTunes cannot read or write to the iPod. Even though must of the library had been transferred to the iPod, before disconnecting the iPod iTunes wiped all but a few hundred megs worth of music from it. I've tried restoring the iPod a few times but that has had no effect. The first time I tried to sync the iPod it was formatted for Windows. I have reformatted it for Mac.
    Also noteworthy is that the first 3/4ths of my library copies very quickly -- 1GB a minute -- but then it eventually slows down to where 100 MB takes 10 minutes. It copies the files in a different order every time, so it doesn't look like it's getting hung up on the same files every time.
    In case I had a corrupted file, I deleted all the files added to the library since my last successful sync.
    Suggestions?
    Should I just go to the nearest Apple store and beg for mercy?

    Hi!
    same problem here.I can use around 30G of my iPod Classic 160G.If i try to upload more than that it will take very long time and finally freezes.
    Have no idea what to do..

  • 2nd gen ipod shuffle cannot be seen in itunes

    I've done everything in the troubleshooting guide; I know that both the USB ports work fine (have an iphone), I know that the software is up to date, that the ipod works fine, that it showed up in itunes 3 months ago and that everything else is in tact. It charges itself fine away from my macbook pro and plays fine but it doesn't exist when I plug it into my macbook pro. I also tried to reset it; did not work.. Please help??

    Just bought a refurbished 2nd generation ipod
    shuffle. I am running the very latest version of OS X
    and iTunes on an iBook G3 600 mhz with the slower USB
    ports, not 2.0 ports. The ipod mounts and is
    regognized by itunes, but I cannot seem to register
    the ipod from itunes, it always has an error message
    when I submit to register (all forms are filled out
    correctly). The registration window in iTunes shows
    that this ipod is formatted for Windows (from the
    previous owner I assume) and may be causing my
    problems?
    No. ALL shuffles are FAT32 format.
    The other problem is that it will not sync and
    transfer any music from itunes library. I am trying
    to transfer simple mp3 files that should be compliant
    with the ipod specs. No luck even after multiple
    restarts on the ipod. Any help would be appreciated!
    Thank you.
    Try this: http://docs.info.apple.com/article.html?artnum=305204

  • Ipod shuffle cannot be ejected; in use of applications

    Hi! I just purchased a second generation ipod shuffle for my nephew on his birthday and thought I would put some music on it for him to make use of it as soon as he opens it.
    First problem is it keeps blinking orange.
    Second, after downloading itunes, I plugged in the USB dock while the itunes window was on my screen, and it says "sync is complete" in the source pane. Nothing else will show, unless I try to eject the ipod and it will tell me it cannot eject because it contains files that are being used by other applications.
    I'm trying to restore the ipod to the original settings, but am stuck.
    Any advice before I have to give this to a 13 year old on Sunday?
    Thanks!

    I was able to get this error message today when I connected both of my nanos to my computer simultaneously (both were auto-syncing).
    While the one ejected fine, the other one started having problems, and then I got this error when I tried to eject it through iTunes.
    The only relatively basic method I found that cured this error was to just reset the iPod while it was connected to the computer.
    For an iPod shuffle: see this article for details:
    Resetting iPod shuffle
    For an iPod with a clickwheel:
    First, toggle your iPod's "Hold" switch back and forth a couple of times. (Make sure to leave it on the white side of the switch).
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
    Your iPod should disappear from the iTunes Source List as the Apple logo appears on its screen, and it resets.
    Then, is will soon go back to the Do Not Disconnect screen, appear in iTunes, and begin to sync.
    Let the sync complete. And, if needed, eject your iPod through iTunes.
    See if you can get past that error message - or do you still get it?
    -Kylene

  • HT1549 How do I read write to an external drive?  I am under admin account and cannot read write to any folder on the external drive.

    I have a Mac Mini with Mavericks installed, as well as a PC running Windows 7.  I want to be able to read write from both computers to an external drive on the Mac.  I created 2 folders on the drive and named them Movies, and TV Shows.  The content of those folders are the respective files. I set up both folders to be shared on the Mac under system preferences, and then mapped the drives on the PC.  I also created a user account with admin privileges on the mac that matched my PC.   I then copied a Music folder to the root drive instead of using external, and set up sharing as well.  File Sharing is selected for all three folders, however the music folder is the only one which allows me to change the permissions to allow read write to everyone, or to create individual user accounts to connect with read write permissions.  The options to add users or change permissions are simply grayed out for the two folders on the external drive, so not only can I not write from my PC, but I can’t even do it on the Mac with the administrative user logged in. The folder on the root drive is fine but I cannot make any changes to the external drive at all.  Get info for any folder on drive shows read only.  SMB and AFP are selected for all folders under options.  I can access all three folders from PC, but can only add files to the Music folder. I cannot do anything from either computer to the folders on the external drive.

    Try Applications/Utilities/Disk Utility - select the drive and run Repair Disk.

  • I have an old IPOD shuffle, cannot get music to download on it

    found an old IPOD shuffle and wanted to download some workout playlists.  I cannot get it to sync with my playlist.. am  ijust out of luck since it is
    a first generation shuffle?

    Dazed and Confused 1 wrote:
    I have just purchased an iPhone 5 and I am have trouble getting the Itunes restore back up from an old Iphone 3 to back up recent text messages and phone calls the last ones the appear on the iphone 5 are dated 3.1.14 as in 3rd January 2014. I cannot get the Icloud app to appear on the Iphone 3 in order to do the transfer in the the cloud any ideas I am completely stuck?
    iPhone 3 cannot use iCloud.
    Backup the iPhone 3 to iTunes.
    Then connect the iPhone 5 and Restore from backup and use the iPhone 3 backup.
    See this -> Transfer content from an iPhone, iPad, or iPod touch to a new device

  • My ipod shuffle cannot hold any other music. i have meditations on there and wanted to add new music. i 'restored' it and now can't remember how i initially set it up. can you help?

    i tried to erase my ipod shuffle. i clicked 'restore' and was asked questions that i have no answers for. i don't recall getting a 'disk' when i bought this. can you please help?

    ➡ https://iforgot.apple.com/

  • IPod Shuffle cannot eject because of problem..

    It said it can't be removed because the items in the Shuffle are being used by another application. What does this mean?

    I get this error when I have a Windows Explorer window open that is browsing the iPod Shuffle disk drive. If you have that open, try closing it.

  • Documents stored in ipod shuffle cannot be found by pc

    Hi,
    I stored some regular files (such as .pdf) in my shuffle. When I tried to extract them to my laptop, no file was found in this shuffle. By the way, I have already choosed "enable use as disk" option in itune when setting this shuffle up.
    Could any one please help out here?
    Thank you so much!
    Best,
    none
      Windows XP Pro  

    I was able to get this error message today when I connected both of my nanos to my computer simultaneously (both were auto-syncing).
    While the one ejected fine, the other one started having problems, and then I got this error when I tried to eject it through iTunes.
    The only relatively basic method I found that cured this error was to just reset the iPod while it was connected to the computer.
    For an iPod shuffle: see this article for details:
    Resetting iPod shuffle
    For an iPod with a clickwheel:
    First, toggle your iPod's "Hold" switch back and forth a couple of times. (Make sure to leave it on the white side of the switch).
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
    Your iPod should disappear from the iTunes Source List as the Apple logo appears on its screen, and it resets.
    Then, is will soon go back to the Do Not Disconnect screen, appear in iTunes, and begin to sync.
    Let the sync complete. And, if needed, eject your iPod through iTunes.
    See if you can get past that error message - or do you still get it?
    -Kylene

Maybe you are looking for

  • Recovering license from wiped Win 8.1 upgrade

    Hi - I only have two computers. One is a laptop with Win8.0 and the other one is my problem child. It did have Win-7/64-Pro on it. I got the Upgrade to Win8.1/64-Pro. I didn't realize that when the installer said it would save my files, it was only s

  • Orange UK Wi-fi Hotspots - Password needed?

    Can anyone tell me if a password and id are needed to access Orange UK wi-fi hotspots, or does the info come from the simcard? I know I need them on my iPhone, but haven't tried yet on the iPad. Thanks.

  • Custom WEB ADI for Item Category Assignment

    Hello, We created following custom WEB ADI . 1.) Item Update  ( No Security ) 2.) Item category assignment ( WITH Security of Organization Access ) Created custom responsibility XX_INVENTORY with custom Menu (subset of INV_NAVIGATE) Added responsibil

  • Read user id

    How can we read the user id of the person running the BEx report? I want to use that in a variable user exit.

  • Hyperlink attached to employee name

    Hi I want to remove hyper link attached to employee name in all ESS/MSS Applications. For example in MSS in some of the table we will get Employee names and which contains hyper link and if we click on that it will navigate to general data applicatio