IPod Shuffle: How to set the maximum volume limit

How do I get back to the volume default I set at the onset of using my shuffle?
I have speakers in my Ski Helmet and would now like to turn up the volume louder than I have currently set for my in ear earpods.
Any help is appreciated.
b

If you're talking about the Maximium Volume Limit:
Setting the Maximum Volume Limit
You can set a limit for the maximum volume on iPod shuffle. You can also set a
password in iTunes to prevent this setting from being changed by someone else.
If you’ve set a volume limit on iPod shuffle, the status light blinks orange three times if
you try to increase the volume beyond the limit.
To set the maximum volume limit for iPod shuffle:
1 Set iPod shuffle to the desired maximum volume.
2 Connect iPod shuffle to your computer.
3 In iTunes, select iPod shuffle in the Source pane.
4 Click the Settings tab.
5 Select “Limit maximum volume.”
6 Drag the slider to the desired maximum volume.
The initial slider setting shows the volume the iPod shuffle was set to when you
selected the “Limit maximum volume” checkbox.
7 To require a password to change this setting, click the lock and enter a password.
If you set a password, you must enter it before you can change or remove the
maximum volume limit.
Note: The volume level may vary if you use different earphones or headphones.
To remove the maximum volume limit:
1 Connect iPod shuffle to your computer.
2 In iTunes, select iPod shuffle in the Source pane.
3 Click the Settings tab.
4 Deselect “Limit maximum volume.”
Enter the password, if required.
Note: If you forget the password, you can restore iPod shuffle. See “Updating and
Restoring iPod shuffle Software” on page 26 for more information.

Similar Messages

  • How to set the Maximum Number of the retry interval in sender cc?

    Hi,gurus:
    You know about how to set the Maximum Number of the retry interval of receiver communication channel in RWB.
    But how to set the one of the sender communication channel?
    Can we set that in integration directory?
    Any help will be appreciated.

    Hi,
    Check this blog, For the settings to be done at SXMB_ADMIN Tuning(IS_Retry_Limit )and the VA
    XI :  How to Re-Process failed XI Messages Automatically
    Also in VA change both inbound and outbound retries. For max no. of retry interval change the default value 300000(5 mins) to 600000(10 mins) or whatever you want.
    Thanks!
    Edited by: Sudhir Tiwari on Dec 16, 2008 7:33 AM

  • How to set the maximum length in a JTextField component.

    Hi This is a basic doubt. How can i set the maximum lenght in a JTextField.. I tried the setColumns() method. It doesnt do anything.. Pls Help.
    Thanks
    Rajeev

    Here's an example using PlainDocument.
    textField.setDocuemnt( new TextFieldVerifier() );
    class TextFieldVerifier extends PlainDocument {
    int requiredLength = 10; // whatever length you want
    public void insertString( int offset, String str, AttributeSet attSet ) throws BadLocationException {           
    boolean valid = true;          
    if (str == null) {
    return;
    String old = getText( 0, getLength() );
    /* insert the new string at the given offset, into the old string */     
    String newStr = old.substring( 0, offset ) + str + old.substring( offset );
    if (newStr.length() > requiredLength)
    valid = false;
    Toolkit.getDefaultToolkit().beep();
    if ( valid )
    super.insertString( offset, str, attSet );
    }

  • How to set the maximum length that a user can enter in Msgstyledtextinput

    Hi Everyone,
    I'm currently using EBS 11.5.1 and 10.2g DB
    Is there a way that I can set the maximum length that a user can input?
    I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
    Developer Mode Exception encountered in item SaveLocation
    Error: The item SaveLocation has a maximum length (100)
             which is not equal to that of the corresponding VO attribute
           , SaveLocation length (150).
    Action: Make sure they are equal in size. There must be other way to set that value
    Thanks,
    Elmer

    You have to set the maximum length of column to 150 to avoid this error.
    You can set the same in Jdev.
    Thanks
    --Anil                                                                                                                                                                                                                                                       

  • How to set the maximum heap size on a deployed application?

    I�m running a fairly large java application and am getting java.lang.OutOfMemoryError. I could increase the heap size in my development environment to eliminate this error. However, I don�t know how to set this in a deployed application. We are currently using ant to build our software.
    Another question, when I execute a statement such as java �Xmx512M �cp app.jar. Is it correct to say that the application in app.jar will use to a maximum of 512MB of memory when running?
    Thank you everyone for your help!

    But first, when you say "a deployed environment" do you mean an executable .jar file? This is what I'm using.The term "deploy" is commonly used to refer to deploying an ear file or a war file on an application server.
    I would assume that there is some entry you can include in the .jar's
    Manifest.mf file to specify the maximum memory, but I can't find an example of the entry. <a href="http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6197671"></a>

  • 2 itunes, 1 ipod shuffle - how to manage the music lib(s)?

    Hi all!
    I've two computers, lets call the first one 'server' and the second one 'desktop'. The server has an iTunes with a huge music library and serving this via LAN to my Roku Soundbridge and to my workstation, where i've installed itunes too.
    Works fine. But now I bought an ipod shuffle and the trouble is, that I can't sync any songs with my new toy...
    I want to use the desktop for synchronizing the ipod. Thinking the problem is: all mp3 files are stored on the server, not on the desktop. If I use a local music library on the desktop, synchronizing the ipod works fine.
    Is there a way to use the desktop (which is accessing the remote music library on the server) to load music to my ipod?
    Hope you understand and can help...
    Greetings
    Christian

    Is it possible that two iTunes using the same music library (the shared folder / drive)?
    Yes, it can be done. How you do it depends on how you want each library on each computer to work. If you want to share music, but for each computer to have it's own playlists, etc. then follow the instructions here:
    iTunes: Moving Your iTunes Music Folder
    IMPORTANT: do not delete the iTunes folder or the preference files it contains from your boot hard drive; delete ONLY the tracks themselves (i.e. the contents of the old iTunes Music folder).
    Note as well that the tracks will not automatically appear in both iTunes listings when you add new tracks from one of your two computers. You'll have to use the Add To Library command, or drag the new tracks to the iTunes window, to get them to appear in iTunes on the second computer.
    If you want both computers to have the exact same library, including playlists, then (presuming you have iTunes 7) you can just drag the entire iTunes folder to your desired location on the shared drive. Then on each system, hold down the Shift key while launching iTunes. You'll be given a dialog box where you can select the iTunes library you want to use. Navigate to and select the iTunes folder in it's new location. Then both systems will have identical iTunes libraries and anything that is added from one computer should appear on both.
    In either case, don't delete the tracks from the old location until you've confirmed that they're working correctly from the shared drive.
    Regards.

  • Nokia 6086 - how to set the Alarm volume?

    I know I'm not the only one to ask this question, but I've not yet seen an answer. Can anyone tell me how to increase (or decrease) the volume of the Alarm tone? I've looked all over the menus, I've looked in the manual, I've gone through both the Nokia and T-Mobile sites, but I've found nothing. Right now, my alarm tone is so quiet it's actually difficul to hear, not exactly appropriate for an alarm! Thanks,
    Solved!
    Go to Solution.

    the standard alarms cant be changed volume wise you nrrd to select louder tone here is link for good loud one
    http://mosh.nokia.com/content/531DDB2B1F444F31E040​050A45300E79
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Cash Journal : How to set the limit for maximum payment of 20000

    Hi Gurus,
    Please tell me how can i set the maximum payment limit of 20000 in cash journal?
    Please revert asap.
    Thank You

    Hi
    Amount Limit
    Use
    You use these functions to define limit values for the FI cash journal; where these limits are reached and exceeded, the user is prompted (in an information dialog box) to run certain activities. The check is always performed in the first local currency of the company code.
    In the countries of the European Union, these functions are used to draw attention to the legal requirement for identifying the payer (money laundering law § 3 para. 1).
    Activities
    Company code:
    You do not have to enter a company code. The entry is then valid for all company codes within a client that use the currency specified as the first local currency.
    Currency:
    Each amount must be specified by the classification of the currency. If you specify a company code, the currency of the company code is entered in the currency field and you cannot change this.
    Date and amount:
    The amount limits are defined time-dependent ("Valid From").
    In addition to the above
    Input your company code,Currency,Valid from and the amount limit
    Good Luck
    Hari

  • How do I get the maximum volume when i export to I tunes?

    Hi
    I am having trouble exporting my demoes at a decent volume, not matter how i set the master volume or check that individual tracks are not peaking e.t.c I can never get my track to export to I Tunes at a volume that isn't painfully quiet.
    Regardless of what mastering I use on GB it always comes out at either the same or a lesser volume.
    I have also ensured that i have selected the option in GB to export at the highest possible volume.
    It is driving me nuts and I know its pretty simple, any idea ?

    johnedwarddrake wrote:
    I can never get my track to export to I Tunes at a volume that isn't painfully quiet.
    http://www.bulletsandbones.com/GB/GBFAQ.html#exporttooquiet
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • "Over capacity": How can I delete photos from iPhone / set the maximum capacity of iCloud photos to be downloaded to iPhone?

    Hi,
    My iPhone regularily goes over capacity because it stores, or tries to store, too many photos/videos from iCloud on the device.
    How can I delete photos from the iPhone (but not generally from iCloud/Photostream). How can set the maximum capacity of iCloud photos to be downloaded to iPhone? (I am searching for a setting like "keep the last 2GB of photos/videos from iCloud/Photostream, but not more than that. I know how to turn iCloud off in total, but that is not what I would prefer to do, I just would like to set reasonable maximum.)
    Thank you for your ideas!
    Generally, I someone could point me to a good tutorial on how local photos vs. iCloud photos vs. Photostream are supposed to work that would be great as well, because I have many other problem with Apple's system in that regard as well (esp., despite that obviously a lot of space is taken up by photos/videos on my device, my iPhone still downloads recent photos/videos over 3G... I also have the problem that all photos appear double if I try to copy to my Mac with ImageCapture or iPhoto, but there is only a single copy (no HDR, burst or the like) when seen with the Photos.app of the iPhone itself... I came to believe that Apple's photo system is somewhere between counterintuitive and plainly not working... (/rant off) )

    Sorry there are no settings to set max capacity.
    My Photo Stream FAQ - Apple Support
    Get help using My Photo Stream - Apple Support
    iCloud: iCloud storage and backup overview

  • Set the maximum length of textedit element in webdynpro

    Hi All,
      How to set the maximum length of texedit element to a some constant characters.setting col and row property to 10 and 2 didnot set max length to 40.setting width and height also didnt helped to limit the characters user can enter to 20.
    Thanks,
    pkv

    >
    pkv wrote:
    > Hi All,
    >
    >   How to set the maximum length of texedit element to a some constant characters.setting col and row property to 10 and 2 didnot set max length to 40.setting width and height also didnt helped to limit the characters user can enter to 20.
    >
    > Thanks,
    > pkv
    Hi,
    Setting row and height is for layout purposes and not for the limiting of text in a TextEdit UI Element.
    To ensure that the Text Exit has only 40 characters in 04s - you can do as Alka has suggested.
    For doing the same in CE 7.1 - you can use the onChange Action and write code inside that method to limit the number of characters.
    I would suggest that you use IWDMessageManager to show a message in the MessageTray whenever the user goes over the limit of 40 characters - rather than accept the whole text and then show some sort of popup.
    Thanks.
    p256960

  • How do I reduce the maximum volume on an iPhone app?

    My sons love watching movies on Netflix and while I don't mind, my youngest tends to push the volume up to the highest volume.
    Is there a way to reduce the maximum volume on an iPhone?  You can reduce the maximum volume on the music under Settings -> Music -> Volume limit but that doesn't affect apps in any way.

    If the app doesn't include a volume setting for the app, the volume for the app depends on the iPhone volume setting at the time.

  • How Do You Set the Maximum Size of a JFrame?

    Can someone show me a quick example? The JFrame can be empty, I just want to know how to set it's maximum size. I tried using setMaximumSize() and it doesn't work for some reason but setMinimumSize() works fine.
    I tried it using a BoxLayout and even using null as a layout manager and can't get it to work. I heard that the other layout managers don't allow you to set the maximum size of a JFrame so that is why I tried it with the layouts that I did.
    I tried the following code (imported the necessary classes), but it does not work...
    public class MyFrame extends JFrame
        public MyFrame()
            super("TestFrame");
            setLayout( new BoxLayout(getContentPane(), BoxLayout.X_AXIS)  );       
            setMaximumSize( new Dimension(400,200));
            setSize(300,150);
            setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            setVisible( true );                
    }// end class

    Reposted from
    {color:#0000ff}http://forum.java.sun.com/thread.jspa?threadID=5236259{color}
    @OP:
    When you repost a topic, please always provide a link to the previous post so people can check what suggestions were already offered (and didn't solve the problem).
    Better still, give a short summary of the advice you have already tried.
    I suggested setBackground(...) so you can see whether your MyFrame is actually occupying the entire real estate of the window. Looks as if trying it out (which I would have done for you if I'd been at home, where my JDK is) would have been too much effort for you.
    I'm pretty much a novice in Swing, but I can tell you this: setLayout controls the layout of components added to the JFrame, not the layout of the frame with respect to its parent container.
    Luck, Darryl

  • How can I set the maximum number of restarts for my PDF files?

    I want sent my PDF to a friend,but I just allow him see it only twice.
    How can I set the maximum number of restarts for my PDF files?
    My software edition is Acrobat X

    In the old days when PDFs were only opened on desktops and only in Acrobat or Reader, scripting could fake security features and people were generally convinced. As there are so many ways to open a PDF without scripts ever being run (from mobile devices to in-browser display, or simply opening the file in Illustrator), none of that works anymore.

  • Just got my iPod Shuffle -  How can I get the 240 free songs, as promised?

    I just got my iPod Shuffle and can't figure out for the life of me how I can download the free 240 songs from iTunes.
    "The first step to wearing 240 songs on your iPod shuffle is downloading iTunes — free. "
    iPod Shuffle   Windows XP  

    Downloading the iTunes program is free, not the songs.

Maybe you are looking for