Ipod shuffle no longer works after 10.7.5 upgrade!

I have the late 2009 iPod (Product) Red Shuffle 2 GB, always worked fine but after the Mountain Lion (10.7.5) upgrade it does not show up in iTunes.
Yes I have the latest iTunes and latest everything. I've already tried unplugging it and resetting the actual iPod. All the USB hubs should be fine I don't
even have all of them filled except for 1 that goes to the printer so I don't understand WHY it won't connect and show. It apparently is charging but I cannot
edit the songs on this iPod anymore. Any advice?
Thanks
A

Morning Antone76,
Thanks for using Apple Support Communities.
First, try the steps in the iPod Troubleshooting Assistant which applies to your iPod.
http://www.apple.com/support/ipod/five_rs/
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Best of luck,
Mario

Similar Messages

IPod Shuffle no longer works after iTunes 8 upgrade

I'm not sure if this should be posted here or in the iPod Shuffle category so I'll post it in both places. I recently upgraded to iTunes 8 and I'm running OS 10.4.11. I have an iPod shuffle that was purchased new last December so I'm not sure what generation that makes it. It has always worked fine with iTunes 7 but now I can not get it to play. I can sync it with iTunes 8 and see that my songs and podcasts are there on the Shuffle but when I disconnect it and plug in the ear buds I get no sound. Nothing. I've tried to play with the volume, forward to different tracks, pause, play, etc. etc. Nothing. No sound coming from iPod shuffle at all now. It is charged up so that's not the issue.
I should also say that my Shuffle was working fine just moments BEFORE I synched it with iTunes 8 for the first time.
Is there a known issue with iTunes 8 and the Shuffle?
Thanks in advance.

After searching the forum I finally found that others were having the same problem with the 1st Gen. Shuffle after upgrading to iTunes 7. Even though it was a different iPod Shuffle and iTunes version their solution worked for me.
All I had to do was delete the "Podcasts" folder that had been created for the Shuffle and voila!

Wheel of iPod Shuffle no longer works

The wheel on my iPod shuffle no longer works (forward and reverse music, volume, etc). Music plays, but otherwise have no control. Reset device, but problem persists. Anyone have a suggestions?

Hello khcumiskey,
Thanks for using Apple Support Communities.
Since you reset the iPod and the issue persists, the next step would be to seek service for your iPod shuffle.
Apple - Support - Service Answer Center
Take care,
Alex H.

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Shuffle no longer works after upgrade

After upgrading to 7.3.1.3, the shuffle option no longer works. I uninstalled and re-installed, still nothing. Any thoughts?

You could also tap the album artwork while the song is playing and turn repeat off.
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

New ipod shuffle no longer working.

New 5Gen shuffle, set up fine out of the box. Played fine for a day or two. Then nothing. Won't charge. Red light comes on for maybe 5 secs when I plug into computer USB and factory jack. Totally dead. Itunes does not recognize it and my computer doesn't seem to know it's plugged in. Tried rebooting my computer to make sure all my USBs were active. Tried plugging into each, no luck. Tried plugging into different computers, same. Any suggestions on a fix?

Hey OSS-117,
Thanks for the question. I understand you are having issues with your iPod shuffle. Let's reset your iPod to isolate the issue further, the following article outlines how to do so:
Resetting iPod shuffle
http://support.apple.com/kb/HT1655
If you continue to have issues, refer to this article:
iPod shuffle troubleshooting and service FAQ
http://support.apple.com/kb/TS1412
Thanks,
Matt M.

Android remote iTunes app no longer works after 10.5.2 upgrade.

Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine. After this upgrade, my tablets no longer show up as "devices" in iTunes. Am I the only one to experience this?

Thanks for your replies.
I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
Thanks,
Danny

Installed Apps No Longer Work After 3.1.3 Upgrade

Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Any information would be appreciated...
Thanks for your time...

TainoV2 wrote:
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
Message was edited by: DaVBMan

Mail search no longer works after 10.7.2 upgrade

The search field in the upper right hand corner no longer returns any results, from any mailbox, regardless of the text I type in. This was working fine until I upgraded to 10.7.2. I absolutely rely on the search feature as my mail messages are a wealth of information for me.
Help!
Brian

I've managed to get it working after trying the following:
1. Used Disk Utility to repair permissions on my main drive
2. In Terminal used the comand "sudo mdutil -v -i on /"
That tells spotlight to turn indexing on for that drive.
3. Did a restart
I'd recommend trying the permissions and a restart first and if that doesn't help then try the command line fix.
The first time I ran it without -v so got no feedback on what it was doing. Stopping it and trying to do it again gave me the message "Error: Index is already changing state. Please try again in a moment." After the restart it now says:
Indexing enabled.
Scan base time: 2011-10-19 07:40:10 +0100 (60 seconds ago), reasoning: 'scan not required - avoided catchup scan'
Now mail is back to how it was before the 10.7.2 update, happy days.

AirPrint no longer works after 10.6.5 upgrade

I followed the instructions in the following discussion thread (i.e. ran the mentioned script) and Print was working perfectly from my iPhones and iPad. Then other day I updated the OS to 10.6.5 and printing no longer works. I assumed that the changes were overwritten by the OS update so I just ran the Script again, same as before, however Printing still does Not work. Please advise. Could it be that Apple realized this work around and plugged it just to **** their "valued" customers.
http://discussions.apple.com/thread.jspa?threadID=2658720&tstart=0
Thanks in advance.

Then other day I updated the OS to 10.6.5
The other day?
Your post in the other thread on 29 November shows you had 10.6.5 installed.
Also I can't explain why but it most certainly did work with the previous OS X
AirPrint is not dependent on the OS
It is dependent on the printer firmware. The printer needs to be on the local network and does not need to be connected directly to a computer.
The fix in that other thread allows iPads to print to printers connected to a Mac.
The code that allows this was not present in Mac OS prior to 10.6.5
If it worked previously, it sounds like you have an AirPrint compatible printer.

W520 webcam no longer working after Windows 8.1 upgrade

Hello,
I upgraded my w520 from Win 7 to Win 8 last year with zero problems.
Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera.
In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly.
Did anyone get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
Thank you!
Solved!
Go to Solution.

try getting the communicastion utility installed under 8.1. The crossed image is the cameras security mode.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

IPod Shuffle won't work after downloading iTunes 7

Help!
I downloaded iTunes 7 and it told me my Shuffle was corrupted (even though it worked perfectly fine in iTunes 6 five minutes before). It prompted me to "restore", which I did, only to get another error message saying that it can't be restored (error 1418). Now I think my Shuffle it totally shot (not recognized by Windows either) and I can't get it to work at all.
Does anyone have any suggestions?

it comes up momentary... then shows a message... "Updating iTunes library"... then locks up.
that is typically caused by a problem with one of your content files.
tracking down which file(s) are causing the issue can be a pain. but you could try the "Check for content files with issues" section from the following document:
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures

Ipod Touch No longer working after Eleven days

I had been carefully checking blogs about which ipod touches had issues to make sure that mine was not part ok week 37. Nothing had gone wrong for the first week of use and i was pretty happy beyond a few small problems that i could live with. Like Freezing up when the battery was low, low wi fi connection, the touch screen not reacting to touch, and the fact that occasionally a song would just stop playing. But then about two days ago i turned on my touch aware that the battery was going low and was shocked when the screen continued to flash black to white, turing on and off about every 4 seconds. The power button is unresponsive, it will not let me reset is manually and now it does not register on my computer and when it is plug in the screen turns completely white then to pink and green ( Like when you computer is defragmenting). I cant do anything, its gone. about three days has gone by and im ready to return it, but i cant deside if i should completly return it and get a refund wait a month and get another, or try my luck with possibly getting another ipod with issues.

You are aware that since you have week 37, you might as well go exchange for a new one. I hear week 38 and 39 are okay, so if you do plan on exchanging it then get week 39. I have a week 39 and so far yet, I have not encountered any problems.

Internet sharing no longer works after 10.5.3 upgrade

I'm aware that a number of people seem to be having wireless networking problems after upgrading to 10.5.3. I apologise if this has been covered somewhere else, but after trawling the forum I haven't been able to find any posts which deal with my specific issue. So any suggestions would be gratefully received...
My 24" 2.8GHz Intel iMac (purchased in Feb 2008) is connected to the internet via ethernet cable through a Speedtouch router supplied by my ISP, o2.
This internet connection is shared wirelessly with the other computer in the house, a G4 MDD running 10.3.9. After switching on Internet Sharing within System Preferences on the iMac, the G4 picks up and connects to the network created by the iMac, which is called (My Name)'s iMac.
All very straightforward, and until a few days ago this set up worked perfectly.
Then I decided to upgrade the iMac from 10.5.1 to 10.5.3, using the Combo updater downloaded from the Apple website.
As far as the iMac is concerned, the upgrade went perfectly and I have no problems whatsoever. I can still access the internet without difficulty as before.
The problem is with the G4. It no longer picks up the network from the iMac. The network's name ((My Name)'s iMac) no longer appears in the drop-down list under the Airport icon in the G4's menu bar (although this list does still contain the names of various neighbours' networks, as it did before, so the Airport in the G4 does still seem to be functioning). Internet sharing on the iMac is still switched on, and the Airport icon in its menu bar indicates that it is "transmitting", but the G4 is just not "receiving" any more. As a result, we can't get online on the G4.
I would be very grateful if anyone could shed any light on this problem. If there is any further information I can supply which might help, please ask.
Steve

Hi SteveSCA-
Greetings and welcome to the Apple boards
Have you tried powering everything down and then back up again?
Have you repaired permissions on the iMac?
Luck-
-DP

HT6114 AirPort Utility and AirPlay no longer works after 10.9.2 upgrade.

After upgrading to v10.9.2 last night, iTunes no longer shows my AirPlay speakers (attached to an AirPort Express) as available (other devices on same network see them fine still).
After upgrading to v10.9.2 the AirPort Utility can no longer see/connect to manage the Airport Extreme Time Capsule or the AirPort Express (the Wifi works, I'm associated to the SSID and sufring the web just fine, but I can no longer manage the devices - they don't even show up (marked as 'missing' with the option to 'forget' them in the GUI).

This worked for me.
Joseph Rose's solution (in another discussion) finally fixed Airplay for me. I now have mirroring and extended Airplay functions again. It was a long road, but in the end, removing Air Parrot and Air Display was the solution for me.
Solution:
Ran the Air Display uninstaller that I found by searching in spotlight.
Ran the Air Parrot removal tool & confirmed that the files were deleted based on instructions from their website.
Thanks to all that participated and spent their valuable time offering assistance!

Ipod shuffle no longer works after 10.7.5 upgrade!

Similar Messages

Maybe you are looking for