IPod shuffle not recognized by pc (windows 7)

I found my old iPod shuffle (A1112, 512 MB). It still works (turns on and plays music). The only issue I have is I can't get my pc or iTunes to recognize it. I'm running Windows 7 64 Bit. I have updated to the latest iTunes version (10.6.1.7). When I connect it to my PC it just blinks it's orange light and I get a pop-up saying that the device was not recognized. Any help?

Is your iTunes and PC update to date?  Do you have any other USB devices connected to your PC?
If you open up Device Manager, (click Start, right->click on Computer and choose Manage), you should see a list of devices on your system. Do you see any entry related to your iPod, perhaps even an entry with an exclamation point next to it listed anywhere?
B-rock

Similar Messages

  • IPOD shuffle not recognized by Windows/Itunes - download installation SW

    I have used a 2G Ipod shuffle successfully on one Dell Windows XP PC for over one year. Have Itunes 7.02 on an identical Dell PC. Plugged shuffle into usb port(s)on second PC - shuffle light turns green momentarily and then off. Shuffle recognized by neither Windows nor Itunes. Went thru the various fixes in apple ipod support to no avail. One suggested fix was to reinstall the IPOD software from the CD that came with the shuffle. Unfortunately, I cannot find the CD and find a link on the apple website to download the corresponding software.
    Suggestions?

    I have a solution, derived after some 16 hours of
    messing about with the shuffle, reading and
    re-reading the forum posts, trying to get my PC to
    recognize it, and hold the USB connection without the
    old Malfunction bubble ... my advice is free ... take
    the shuffle back! I swapped for a 2G Nano, and
    within 5 minutes I was off and away! Go Apple GO!
    The highly experienced sounding tech at the store
    was also at a loss.
    If you read the OP's plaint carefully you'd have noticed what's being talked about is a Shuffle that's over a year old... Thus, unless OP has AppleCare, taking it back is not an option.

  • IPod Shuffle not recognized by windows 8 but is by Windows 7

    iPod Shuffle not recognised by WIN 8 but is by WIN7
    When connected via iTunes iPod Shuffle charge light does not come on and WIN8 Control Panel Hardware status indicates a problem with the iPod. WIN8 troubleshooting results in the following message:
    Windows is uninstalling this device. (Code 21).
    No such problems exist when iPod is connected in WIN7 via iTunes i.e. charge light came on and the device was recognised OK by WIN7Control Panel Hardware status.
    Is there any fix to make WIN8 behave OK like WIN7 for iPod Shuffle?

    first try reinstalling itunes on 8, also have all your files been moved over to win8 or maybe try restoring the shuffle

  • IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

    Hello everyone,
    I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
    As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
    I am not happy with this upgrade issue at all. I expect much better from Apple.
    Steps Already Taken:
    1. Reset iPod.
    2. Set Terminal Services to "Manual" and restarted my laptop PC.
    3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
    4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
    5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
    6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
    My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
    What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

    qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

  • Ipod shuffle not recognized in windows 7

    I bought a new 2gb ipod shuffle 4th gen on friday, as my 120gb classic was stolen, and i have been having massive problems with it. Whenever I attach it to the USB port (tried in all 4) it only comes up with a box in the bottom right of windows saying "USB Device Not Recognized", and then nothing at all happens in itunes (which is up to date). To say I have taken it out of the USB port and put it back in 200 times would not be an exaggeration. After about 10 minutes, it was suddenly recognized and I managed to put a few songs from my itunes onto it, but then it got disconnected, and it was never recognized by the computer again. As I only managed to put a fraction of the songs I want on it, it is annoying that it won't work.
    The ipod shuffle plays completely fine, I can listen to the songs I DID manage to put on it. I have also tried everything on another computer with itunes and the same thing happened. Every other USB device I own has worked on it, and I have unplugged everything to see if or not it conflicts, and it makes no difference with the shuffle. As the shuffle plays fine, I can only imagine it being a problem with the cable, but for a brief time it worked in itunes perfectly, so I am unsure.
    Any help would be massively appreciated. but at this rate I will be taking it back to argos.
    I have tried practically everything in all the support and troubleshooting guides, tried using the shuffle in 2 seperate computers, and the shuffle is most definitely plugged in all the way!

    Hello Erickson Gudelano,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Best of luck,
    Mario

  • Ipod Shuffle not recognized by computer and iTunes and does not charge

    I connected my iPod to my computer but for some reason, it is not recognized at all by the computer nor iTunes. It doesn't charge either. I have tried all the USB ports and since I have Windows Vista, I cannot use the Restore Utility thingy. I purchased my iPod about 2 years ago so a warranty replacement is out of the question. Since any choices have been kicked off, can anyone find a solution to my problem? TYVM pl0x

    Time to replace it: $49 2nd Gen shuffle at online Apple Store...

  • IPod Shuffle not recognized on Mac or PC - Help!

    So a freind of mine asked me to fix his iPod shuffle. He tried to fix it himself by plugging it into his Windoze PC and formatting it like a hard drive. I explained to him that it probably wasn't a great idea but at any rate, here we are.
    I have access to a Mac Mini, and a PC both with the latest version of iTunes and the iPod Updater.
    When I plug the iPod shuffle into either the Mac or the PC, it does not show up at all. It does show up in the Device manager of Windows as a Disk Drive but it's not accessible. It proceeds to peg the CPU at 100% and thoroughly bog down the PC. When I plug it into the Mac Mini, and run the iPod Updater, it tells me to "Plug in an iPod to update it." Problem is, the iPod is plugged in. This happens both on Windows and PC when I run the iPod updater.
    Does anybody have any idea on what I should do to fix the iPod? I must admit, I've only had the Mac Mini for 1 day and my previous experience with the Mac OS was OS 8.6 on a 6400 so be nice :P.
    Thanks in advance,
    ...tom

    Hi,
    Visit http://docs.info.apple.com/article.html?artnum=61711
    if still the iPod shuffle is not recognized then take back from were you brought the iPod shuffle or visit http://depot.info.apple.com/ipodshuffle/
    to setup a online service dispatch.

  • Ipod shuffle not recognized in iTunes

    When I connect my iPod shuffle to my computer, it is recognized as a device (I can safely remove it under "safely remove hardware") yet it is not recognized as a drive. Also, it is not recognized by iTunes and therefore does not appear on the source list.
    I am not having any of these problems with my iPod nano which I have tested after having the problems with the shuffle - I have the most current version of iTunes loaded and I am connecting the ipod through a high-speed USB port.
    I am unable to restore the ipod software because it does not appear in my iTunes. Currently all of the songs I had on the shuffle the last time I was able to successfully connect it are still there so the shuffle isn't broken completely.
    I have read through all of the applicable troubleshooting documents and none seem to specifically apply to my situation (i.e. it is being recognized by the computer as being connected but not as a storage device, etc...)
    What should I do? Please help!
    Thank you!
    IBM   Windows XP  

    Not sure exactly what you mean but here's a shot.
    - Connect shuffle to computer, "safely remove hardware" icon in system tray has it under "USB Mass Storage Device"
    - When I double click on "USB Mass Storage Device" there is an option to stop "Apple iPod USB Device"
    I only know this b/c that's the only way I can disconnect it safely since I can't eject it from iTunes.
    What I meant by it not being recognized as a drive is that when I connect my other ipod, it brings up a window for "drive E" in windows explorer as well as populates the nano in the source list within iTunes. This does not happen with my shuffle.
    Does that make sense?

  • IPOD Shuffle not recognized by computer, and caused a  USB power surge

    Device is not recognized by computer, and I tried the listed support recommendations.
    The problem originated when I plugged the IPOD shuffle directly into the computer USB ( not using a hub), and this caused a warning window to appear saying unknown device has caused a power surge to this port, and most be removed. Prior to this event, the IPOD shuffle has worked (with direct contact with computer usb or through a powered highspeed usb hub) without issue for nearly 1 year. Any taker's on this issue? Thanks.

    Hi JBR,
    Go to your control panel and click on Install/Uninstall programs. Scroll down and see if you have multiple versions of the ipod updater installed on your computer. If you do, then uninstall both versions. Reboot your computer.
    Next, go to the downloads page and download/install the 1-10-2006 ipod updater. Once installed, go to your start programs and select ipod updater from there. Plug in your ipod and wait a moment. If it's like mine, it'll recognize your ipod and then you can do a "restore" for a clean format.
    After that, open itunes and life should be good.
    Hope this helps!

  • Ipod is not recognized by the windows our the itunes

    Hi
    I receive my ipod nano(2gb) by August, it was running fine, without a problem, but now i can recharge it because windows our itunes does not recognized my ipod is connected. I even have try to recharged in true the electricity but the resolte was the same, my ipod does not show to be recharging.
    Can someone help me solve this problem.
    Thanks pandora

    I HAVE A SIMILAR PROBLEM TO THAT I JUST BOUGHT MY 30GB IPOD VIDEO ABOUT 4 HOURS AGO, SINCE THEN I HAVE BEEN REALLY STRUGGLING TO INSTALL IT. A SOON AS I GOT IT, I DID EXACTLY WHAT IT SAID, I WENT TO WWW.APPLE.COM/IPOD/START AND DOWNLOADED THE NEWEST ITUNES VERSION. THEN I PLUGGED IN MY IPOD TO MY COMPUTER, AND ALL THAT HAPPENS IS A LITTLE BUBBLE OPENS UP AND SAYS "FOUND NEW HARDWARE" WHEN I CLICK THAT, IT OPENS UP, AND I CLICK "INSTALL THE SOFTWARE AUTOMATICALLY" WHERE IT SAYS IT, THEN I CLICK NEXT AND WAIT. AFTER, IT SAYS "THE HARDWARE WAS NOT INSTALLED BECAUSE THE WIZARD CANNOT FIND THE NECESARRY SOFTWARE".AFTER I WENT TO WWW.APPLE.COM TO FIND OUT WHAT THE PROBLEM WAS, I'VE LOOKED THROUGH AND READ EVERY ARTICLE THAT CAN PERTAIN TO MY SITUTAION, BUT NONE HAVE HELPED ME I AM DISPLEASED TO SAY, THE LAST ARTICLE I READ WAS THIS ONE:
    http://docs.info.apple.com/article.html?artnum=305136
    BUT EVEN THAT DOES NOT HELP ME BECAUSE WHEN I GET TO STEP 8 WHICH SAYS "Locate the iPod in this list. In some cases one of the entries will have "iPod" in its name. If no such entries are present, the iPod is most likely represented by "USB Mass Storage Device." I LOOK FOR WHERE IT SAYS "IPOD" OR "USB MASS STORAGE DEVICE" UNDER "UNIVERSAL SERIAL BUS CONTROLLERS, AND CANNOT FIND EITHER THING..I HAVE RESTARTED MY COMPUTER A NUMBER OF TIMES, I HAVE EVEN UNISTALLED ITUNES THEN REINSTALLED IT I HAVE STRETCHED EVERY OPTION AND NOTHING HAS WORKED..CAN SOME ONE PLEASE HELP ME??..I HAVE BEEN TRYING TO SOLVE THIS PROBLEM FOR 4 HOURS STRAIGHT STOPPING ONLY TO GO TO THE BATHROOM AND GRAB A BITE TO EAT..

  • 30 GB Ipod Video not recognized by either Windows or Itunes

    Hi,
    I purchased a new 30 GB iPod Video (5th generation) today to replace my old iPod photo. It's been charging for a few hours, but when I plug it into the computer there is hardly any recognition. Windows will make the "you plugged in a USB" noise but that's it. The iPod will not go into "DO NOT DISCONNECT" mode, nor will iTunes recognize the iPod.
    iTunes is updated, and I tried many of the tips on the pages here. I've also tried to reset it by holding the menu and enter buttons, and it reset, but there was no recognition. I even tried toggling the hold switch back and forth a few times and I got noting.
    I'm seriously perplexed, so any help would be appreciated.
    Thanks,
    Adam

    Hey, I have just recieved my new 30 gig ipod video as well for my birthday on halloween! Which was also to replace my 20 gig ipod photo that died...
    My ipod will not be recognized by my computer in my computer or in itunes... I have tried all i know and all that the support online knowS!!! Why did they stop making the cd's that had the driver in it!@!!!!
    Anyways umm i would also greatly appreceiate some guidance because so far i have unintalled all itunes stuff and then reinstalled it and nothing..., i have restarted my computer many times and it will so the DONT DISCONNECT IPOD And im like SUCCESS!!!!! THen that goes away before my computer has finished starting up and all hope is onoce again lost... !!! Someone please help Us!!!

  • 2nd gen iPod shuffle not recognized by Yosemite or iTunes 12

    I just connected my iPod shuffle (2nd gen) into my macbook for the first time since the update to Yosemite and iTunes 12.  Right when it's plugged in the iPod only blinks orange three times, then doesn't blink or light up again.  It doesn't show up in iTunes or in the finder.  It also doesn't show up in the USB devices on the system report.  It charges when plugged into a wall-USB charger, but isn't recognized at all by the mac.  Also, I'm using the factory mini-dock that came with it, which I believe to be in perfect working condition.
    I know they're cheap, but I've ran thousands of miles with it and I've grown attached to it.  I've spent more time with it than most of my friends...
    I'm afraid the new ones might not be as amazing as this one.
    Although it is still useable, I really need some fresh music on there as my runs are beginning to get boring.
    It has always connected fine with no issue, which leads me to believe its a Yosemite issue (maybe apple is trying to weed out the old iPod fossils still roaming about).  But, it may just be a coincidence that it stopped working just after the update. ...Maybe my iPod is just toast.  Any suggestions would be greatly appreciated!  Thanks in advance!!!

    Hi
    I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
    The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
    What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
    I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
    I really hope this helps.

  • 3rd Generation iPod Shuffle Not Recognized by iTunes 11.1.1

    I am trying to have iTunes recognize my iPod Shuffle 3rd generation.  It worked fine until I downloaded iTunes 11.1.1.  I am using OS X version 10.8.5.  Does this latest version of iTunes not work with my shuffle any longer?

    It should work fine.  I have a 1st gen shuffle, and it still works...
    If you are updating to iTunes 11.x for the first time, iTunes may hide the sidebar initially, which is where the shuffle appears.
    If the iTunes sidebar (along left side of window) is not visible, from the iTunes menu bar, under View, select Show Sidebar.  In the sidebar, the shuffle should appear under DEVICES.

  • 2nd generation ipod shuffle not recognized by usb 3.0 port, 2nd generation ipod shuffle not recognized by usb 3.0 port

    Hi,
    My 2nd generation ipod shuffle will not connect to any usb 3.0 port.  I've tried on to computers -- one Windows XP and the other Windows 7.  Any ideas?

    Hi
    I had the same issue with my Late 2009 Mac mini running Mavericks and iTunes 12. When I connected my 2nd generation iPod shuffle it would blink amber once then do nothing. This seems to be a common problem with the iPod shuffle and newer versions of Mac OS X (10.6 and up) and iTunes albeit with somewhat varying symptoms but the same overall problem syncing the iPod with iTunes.
    The predominant go-to solution is to give the iPod more power by either connecting the iPod directly to a USB port on the Mac or by disconnecting all other USB devices. On paper this makes sense.
    What worked for me, however, was the opposite. After trying to solve this problem for hours (weeks, months), I had success ONLY after adding a low-powered 4-port USB hub to the chain between the iPod and the Mac. I suspect this had the effect of throttling the power supplied to the iPod from the Mac. I was able to perform a restore on the iPod then sync my music over.
    I can't tell you much about the USB hub except that it is running at USB 1.1 speeds (12 Mb/sec). In theory a USB 1.1 extension cable should also do the trick. You might even be able to use the USB hub in old wired Apple USB keyboard. I will attach a photo of the hub I used to this post for greater clarity.
    I really hope this helps.

  • 4th Gen iPod Shuffle, not recognized by my Macbook Pro

    background:
    bought an ipod shuffle 4th Generation 2 days ago,
    syned it with my macbook pro/itunes
    everything was fine. got my music on there, i did noticed once or twice a window popped up saying i disconnected my ipod shuffle without ejected (i did not)
    now get rid of possible solutions i have already checked for:
    ipod was always full connected on the headphone jack, clicked everytime, USB was always secured into my macbook as well
    itunes has the latest version
    updated my ipod shuffle immediately after getting it
    macbook pro is updated with the latest mountain lion OS
    tried resetting my ipod
    tried resetting my ipod while still connected to my computer

    There is no Finder access to an iPhone 4S or other iOS device.
    (79999)

Maybe you are looking for

  • Minecraft app not working

    hi, just boght this touchsmart hpk- 23-p030na i5 and downloaded the minecraft app for my son, but when you click on it there is only a black screen with the games description, it will not load etc. using windows 8.1, i5 procssor etc. can you help? th

  • IPad: After some minutes of playing a video screen turns green

    After some minutes of playing a video from an iPad the screen turns green, what can I do? I use the private release function of iTunes with an iPad (iOS 4.3.2) connected via wireless lan with my Mac (21,5", OS X 10.6.7). Many thanks in advance! Johns

  • Extra View Objects Generated?

    I've generated Application Module containing view objects and links. I've got generated four view objects accesors: get<vo>, get<vo>1, get<vo>2 and get<vo>3, but in my project I do not see four view objects, but one <vo>. What happened? I use view ob

  • Required a user Exit After Transfer Order Number is genarated?

    hi guys I need a userexit  when ever the Transfer order is generated i need to call the form .can any one help me on these Thanks in advance Moderator Message: First help yourself by doing some R&D. If you do not stop asking such lazy questions, then

  • Executing BLS Transaction through Xacute query template?

    Hi Experts, Am having a SQL query template for which am passing value from web page after user input and i have added this SQL in my BLS transaction in illumSQL action block. I have created Xacute query template and display template(iGrid) for displa