IPod Shuffle stop working after upgrade to iTunes 7.02

I upgrade to iTunes 7.02 after it prompted me so many times. My Ipod shuffle has 512MB, somehow iTunes 7.02 format it as 34GB, yes, 34GB!! I wouldn't mind it so much if it still works, but it doesn't.
What I have tried so far, I uninstall 7.02 and put back 6.05, still it shows 34GB. It does recognize the Ipod shuffle and allows me to put songs in it, except they don't play.
I download the Ipod shuffle reset utility, but it doesn't recognize the IPod. I am really bumped on this one, nothing to listen to on my long commute.

Hey man... I know what, you were right! I did some more research and ended up looking for any answaers on the Digidesign site. I downloaded the latest version of CoreAudio for my plataform (ProTools TDM Mix Plus with OS X 10.3.9) which is CoreAudio 6.9 and it seems to have solved all of my problems! At least iTunes and QT are opening again and seem to be working good so far. PT also seems to be runing with no problems!! Thanks again for the hint!

Similar Messages

  • Ipod Shuffle not working after upgrade to iTunes 7.02

    I upgrade to iTunes 7.02 after it prompted me so many times. My Ipod shuffle has 512MB, somehow iTunes 7.02 format it as 34GB, yes, 34GB!! I wouldn't mind it so much if it still works, but it doesn't.
    What I have tried so far, I uninstall 7.02 and put back 6.05, still it shows 34GB. It does recognize the Ipod shuffle and allows me to put songs in it, except they don't play.
    I download the Ipod shuffle reset utility, but it doesn't recognize the IPod. I am really bumped on this one, nothing to listen to on my long commute.

    Hey man... I know what, you were right! I did some more research and ended up looking for any answaers on the Digidesign site. I downloaded the latest version of CoreAudio for my plataform (ProTools TDM Mix Plus with OS X 10.3.9) which is CoreAudio 6.9 and it seems to have solved all of my problems! At least iTunes and QT are opening again and seem to be working good so far. PT also seems to be runing with no problems!! Thanks again for the hint!

  • Why does my iPod Shuffle stop working after a few songs?

    I had my iPod Shuffle for about a month now and it's already causing me trouble.
    I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
    So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
    I already tried using the iTunes troubleshooting guide, but nothing worked.
    Details -
    4th Generation
    I only use it at the gym or when I'm running
    I've only used the Apple products that came with it so far
           (e.g. charger, headphones, etc.)
    881 MB are still left
    Music stops randomly, no common number or pattern

    I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
    1. open itunes, make sure its up to date, then connect your shuffle to your pc
    2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
    3.then go back and click on your ipod on the left, a message will appear just select apply
    all of your music should be emptied from your ipod.
    4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
    5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
    6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
    If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
    7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box  "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
    8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
    9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
    10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
    Not sure if all of this was necessary but it worked for me.

  • TS2972 Home Sharing with ATV stopped working after upgrade to iTunes 11

    After upgrading to iTunes 11, my two PCs are no longer visible to Apple TV or the iOS Remote App.  I went through all the steps in "Troubleshooting Home Sharing" http://support.apple.com/kb/TS2972 without success.  In additions, I tried:
    Turning Home Sharing off, then on again on both PCs
    Re-created Firewall rules for iTunes
    Ran a factory reset on Apple TV
    Disabled iPV6 on the network adapter, based on a blogger's fix for an iTunes 10 problem
    Some other observations:
    Home Sharing was working with Apple TV an hour before I ran the updates for iTunes 11 and Apple TV. 
    The Apple TV and iOS Remote App are working together, so the network settings must be correct.
    The PCs in question are running Window 8 Pro 64-bit and Windows 7 Pro 64-bit
    The two PCs can see eachother's iTunes.
    It seems likely this is an iTunes 11 issue, but upgrading ATV2 at the same time clouds the diagnostics.
    I was just about to order two more Apple TVs, but now have second thoughts now that my ATV2 is just a doorstop. 
    Any suggestions? 

    You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
    https://bbs.archlinux.org/viewtopic.php?id=145564
    It seems like this is more your issue:
    http://permalink.gmane.org/gmane.linux. … devel/8932
    But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
    Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
    http://serverfault.com/questions/226319 … ie-aspm-do
    So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

  • My iPod shuffle stopped working at all. Nither my computer, no iTunes can recognize it. There is no any green light on it and no sounds. I can't charge it.

    My iPod shuffle stopped working at all. Nither my computer, no iTunes can recognize it. There is no any green light on it and no sounds. I can't charge it.

    Try:
    Turn on without Home/Power Button

  • My work e-mail stopped working after upgrading to 5 ios.

    My work e-mail stopped working after upgrading to 5 ios, I get the message that the mail server is not responding. Verify that you have entered the correct account info in mail settings. the information is correct and worked until I updated.

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak ESP 3200 stopped working after upgrading to Yosemite

    Kodak has posted an unsupported hack that has been reported to enable printing to a Kodak printer not supported in OS X 10.10 ("Yosemite"). Perhaps it would have the same effect with some other kinds of printers that aren't supported in Yosemite. I have no information about that, one way or the other.
    I have not tested the hack myself and I don't know all the possible effects. As far as I know it will not break the compatibility of printing software that is already compatible with Yosemite. It may degrade the security of the web administration interface of CUPS. That interface is not enabled by default, and will not be enabled by the procedure described here. Even if it were enabled, I know of no way it could be exploited, with or without the modification. Nevertheless, if you have enabled the web administration interface, you should disable it if you decide to follow these instructions. If you don't know what the web administration interface is, you haven't enabled it.

  • My Microsoft Office 2004 stopped working after upgrading to MT.  How can I get it to work, or, how can I uninstall MT?

    My Microsoft Office 2004 stopped working after upgrading to Mountain Lion.  How can I get it to work again, or, how can I uninstall MT?

    Office 2004 Applications Won't Work in Lion
    You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
    You may want to consider as well:
    These two suites are similar to Libre Office but not as current or as well-supported:
    NeoOffice
    Open Office
    And, then there is Apple's iWork suite:
    Pages - word processing and layout
    Keynote - presentation
    Numbers - spreadsheet
    Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
    (Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

  • How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    How do i get my ipod touch to work after i downloaded itunes and plugged it in?

    This sounds like your problem:
    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Above from:
    http://support.apple.com/kb/TS3694

  • Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

    My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

    try and Reset the System Management Controller (SMC)

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • Why does my cable selfie stick stop working after upgrading to iOS8.2?!

    I have an iPhone 6. My cable selfie stick stopped working after upgrading to iOS8.2.
    My friend's iPhone 6 is still iOS8.1, and the seflie stick works fine for him!
    How do I solve this?

    Are you using the paintbrush and have a gradient assigned to a stroke in CS6?
    Double click on paintbrush, and enable keep selected.
    If not give us a better explanation of what tool & settings you are using. (eg: blob brush, shape builder)

  • Location services is stopped working after upgrading to iOS 5

    Hi, Location services is not working after upgrading to iOS 5. How can i switch it on?

    Try resetting the iPod.  I had to do that to get my iPod to show via FindMyiPod.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

Maybe you are looking for