Ipod shuffle stops playing the song after a few seconds

My Ipod shuffle stops playing the song after a few seconds, i can skip to the next song but it happens again for every song..
the thing is its random, sometimes 5secs or 10 secs or at the most a whole minute
i have updated, restored, reinstalled an all that but i really dont want to send it back as im in afghanistan and would be weeks before i see it again an i use eveyday!! for running.. i thought maybe sweat had got inside it, its not the headphones i have already tried swapping them.
please help out a soldier in need?

mine is doing the same thing; I have updated it, and restored the factory settings, and it still isn't working. I use mine for running as well; I think it has something to do with the sweat. Hopefully someone posts with a fix.

Similar Messages

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

Skipping the song after a few seconds on certain tracks

hi, I have spent hours trying to find something about this and there's nothing anywhere, this is getting really annoying.
I bought a 2g ipod nano in February and here's my problem. When i play certain songs, the Ipod will stop after a few seconds and jump to the next one. It happens always on the same song, however I can make it work if I manually skip some of the song by holding the forward button, but it still might jump to the next one after a few seconds. Anyway, I missed a good part of the song in the process and I have to do it all the time. This is annoying because on some albums, I miss up to 4 or 5 songs. I don't think that's what you expect after spending $150 on a new toy.
I noticed it does that on songs that are irregular, with breaks in them. I have restored, reset, erased the songs and replaced them, looked into all the options possible, through the forums and the internet and cant find a good answer. please help me!

thanks for all the help.
now, went to play with those options and it doesn't change anything. I even try to set it up so it would skip the first 3 seconds of the song since it's where it stops. To no avail. just stopped at 7 seconds...
So, it's not the track, it's not the gapless option (on or off doesn't make any difference), it's not the Ipod program (reinstalled it several times). What is it then???

IPod Nano (2nd generation) stops playing some songs after 30-60 seconds

I purchased a 2nd generation 2 GB iPod Nano last week (03/13/07) and experienced problem with some songs stopping after 30-60 seconds and then skipping to the next song.
The songs in question were downloaded in Mp3 format from a CD and they play fine and in their entirity from the iTunes library.
I tried the 5Rs but with no success. Thinking the iPod Nano was defective, I exchanged it today (03/16/07) however, the same problem persists and with the same songs.
I tried compressing the songs but that made matters worse, i.e., the play duration shortened and/or the songs didn't play at all.
Is this an iPod Nano issue or a problem with certain songs? Given that the identical problem exists with two brand new units, I suspect the latter but I don't know what to do.
The songs are not "read only" or "origin-protected".
Appreciate any assist.
Thanks.
Dell PC Windows XP
Dell PC Windows XP

I've experienced the same problem with some songs that will start playing for few seconds but then skip to the next song. This is with songs I've ripped from CDs and transferred from an old computer. I've tried the 5 R's, repeatedly. It does not help. Is there anyway to fix this other than deleting the songs from my computer and re-downloading from CD's? I've got over 1,800 songs on my iPod and really don't want to go through each one to figure out which I need to reload.

30 GB Video IPOD will not play the songs...PLEASE HELP!!!

My 30 GB Video IPOD just stopped playing the songs. You can move easily through the menu, select a song, and press the play button, but the song will not play (the time bar doesn't move at all). It's as though it is frozen...it never moves from 0:00. Every other aspect of the unit is working...but the songs. Can someone help???

Been through these?
The Five Rs.

My ipod shuffle only plays the first songs on the list.

My ipod shuffle only plays the first songs on the list even though it has several more podcasts in it. it only plays a series of podcasts instead of all of them. My older shuffle never had this problem. How can I solve this?

Your older shuffle, if 1st or 2nd gen, did not have the ability to play from multiple playlist. It was essentially just ONE playlist that you loaded manually using iTunes. A very simple device. With the new shuffle, it works more like the "bigger" iPods and you can load more than one playlist (so it is more complex), but if you select a specific playlist (using VoiceOver), it works like the old shuffle.
My ipod shuffle only plays the first songs on the list even though it has several more podcasts in it.
That is probably because you are playing songs from the All Songs list, instead of choosing a specific playlist using VoiceOver. Podcasts do not play from the All Songs list.
it only plays a series of podcasts instead of all of them.
If you use VoiceOver to select a podcast, it only plays episodes from that particular podcast.
Here's what you can do, to make it work like your old shuffle. Create a new regular playlist in iTunes, and name it something like "iPod Podcasts" or whatever you want. Treat that new playlist like your old shuffle. Manually add the podcast episodes you want on the shuffle, in the order you want to hear them, on that playlist. NOTE: You can adjust the playlist order after adding the podcast episodes.
Select the shuffle in iTunes. You see a row of "tabs" (buttons) starting with Summary. Click Podcasts there. This is the Podcasts tab, where you set up how iTunes syncs podcasts. Check the box for Sync Podcasts. Below that, since you have a playlist with the podcasts you want on the shuffle, you only need to go to the list under Include Episodes from Playlists and checkmark that iPod Podcasts playlist.
When you click Apply, the episodes on that playlist sync to the shuffle. Going forward, to update the podcasts on the shuffle, update that iPod Podcasts playlist (add and remove episodes) in iTunes. Then, the next time you connect the shuffle, iTunes automatically updates the shuffle with the same changes. If the shuffle is already connected, click the Sync button to update.
When using the shuffle, set the shuffle's power switch to the play-in-order (middle) position. Podcasts are skipped on playlists, if the power switch is set to shuffle. Use VoiceOver to switch to that iPod Podcasts playlist. The podcast episodes should play in playlist order.
NOTE: You can load songs in the same way. Create an "iPod Songs" playlist in iTunes, with the songs you want on the shuffle. Go to the shuffle's Music tab, and select that playlist. And audiobooks on the Books tab. You can load as many playlists as you want. The big advantage of the new shuffle is that you can have different types of content and keep them organized on separate playlists.
Here's information about VoiceOver, in case it is not already set up.
http://support.apple.com/kb/ht4322

While running how do I get my podcast to play one song and move to the next and not skip to the next after a few seconds into the song?

I recently started running and downloaded the Couch to 5K webcasts, while running how do I get my podcast to play one song in it's entirety and move to the next and not skip to the next after a few seconds into the song? I beleive it's the motion of the running that is causing it, is there a setting I need to change?

Hello nowrunning,
Is the "Shake to Shuffle" option turned on in your iPod's settings? To check, head to Settings -> Music -> Shake to Shuffle and make sure it is set to Off.
B-rock

My iPod is not playing the songs that I purchased from iTunes.

My iPod is not playing the songs that I purchased from iTunes.

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
tt2

1 iPod 2 iTune account, iPod doesn't play the songs purchase

we have A, B two itune accounts, when tranfering songs purchased by A iTune account, iPod won't play the songs that were purchase by B iTune account.
what should we do with it?

Lo,
http://docs.info.apple.com/article.html?artnum=93195

My iPod shuffle stops playing after a few songs, then it won't start again.

My iPod shuffle will stop playing after a few songs which is very frustrating while out walking. I end up having to shut it off for about a minute or two and then turn it back on. Sometimes it will start playing again, but it will start playing the same songs over again. I can't go forward or go back. When I try to skip a song, all I get is dead air. I took it back to an Apple store and they replaced it free of charge; which I thought was great... that is until the new iPod started doing the exact same thing. I've downloaded songs from the iTunes store as well as songs off of my personal CD's. I've tried deleting all the songs and re-installing them... nothing seems to solve this problem. I know it only costs $50; but if Apple can't get a $50 item to work; why in the world would I want to invest more money in an Apple product? It's a good thing this was a gift.... I'm just not happy with this product and there doesn't seem to be a good explanation for this.

I Just ran into the same issue:
My iPod shuffle 4th gen would just stop playing, and I had to turn it off, wait 10 secs and the turn it back on.
Then it would get stuck at the same place.
I Even exchanged the iPod for a new one since I had just bought it.
re-synced my playlist and same issue!
did a restore as described above - same issue.
Solution in my case:
one of the songs in my playlist seems was "corrupt". Even trying to play the song in iTunes on the PC did not work, kept getting the message "This computer is not authorized ....", even though the computer is authorized.
So somehow that song being on the shuffle crashes it.
After I removed that song from the playlist and synced again, the problem was resolved!
So try to play all the songs that you want to sync to your shuffle on your computer, maybe you have one song that was not downloaded properly or is otherwise corrupt.
- Deleted the song from the local library
- re-downloaded the song from iTunes store
- now it was playing fine on the PC in iTunes
- re-added it to the playlist, re-synced iPod shuffle
all is working fine now, shuffle no longer freezes.
hope that helps someone else....

When I plug in my ipod shuffle(early model) the songs do not appear on play list. Play list shown is wrong.Any ideas?

When I plug in my ipod shuffle { early model } the play list that appears does not show what is actually on my ipod. Some I had deleted before and some songs that I have never had on my ipod. appear on the list I do not knw via the computer what is actually on my ipod. Any suggestions. Why cany itunes leave things alone. If it aint broke dont mend it. This has only happened since I down loaded the latest itunes.

Make sure that your music is in the format supported by the iPhone. I use either MP3 or AAC.
A friend had the same problem a while back. All his music was in the WMA format and is therefore not playable on the iPhone and would not copy. Once he converted his songs to MP3 they copied to his iPhone without problem.

Stop playing the song

is it possible to stop playing a song at ipod nano 7th, not just pause it?

See page 21 of your iPod's user guide for information on how to turn off the repeat feature.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

New iPod Classic jumps to next track after a few seconds of certain songs

I have several tracks that will not play on my new iPod Classic (80 gig) for more than a few seconds. After a few seconds, the iPod jumps to the next track. I have played the same songs on my last generation iPod with no problem and in Itunes and Windows Media player with no problem. There is clearly an issue with the new iPod hardware/software. Anyone else having this issue and found a fix.
I have already done a complete reinstall of the new iTunes and restored my iPod to factory settings and installed the latest iPod software.

Actually - I just noticed your solution to the issue. I tried PT's solution, which I mention above and it didn't work. I haven't tried your solution - however, I have considered it. Here's the problem with it though. The first problem is having to sift through 5400+ songs on my ipod to know which ones are having the issue and which ones need to be burned. The second issues is that the songs are compressed mp3's. Converting the compressed mp3's into a cd and reimporting it back into mp3 further degrades the file - you're essentially making an mp3 from an mp3. It actually makes no sense to do this unless you've purchased your music from an online store and therefore don't have the original cd's. Since all of my music is from my cd collection, it would be simpler to re-import the songs from the cds. But, it's really the first issue I mentioned that is the kicker - I don't want to go through my entire music collection to find out which ones are having the problem. The problem isn't the tracks as far as I am concerned - I still have my previous generation iPod and the same tracks play fine. The same tracks play fine in iTunes and Windows Media Player. The problem is the new iPod. If Apple can't resolve the issue through an iPod/iTunes update in the next week or so, I'll just return the iPod and stick with my old one.
Message was edited by: Oluyinka Oyesiku

IMovieHD 6 plays the video just a few seconds and the video quits

When I using iMovieHD 6 the video freezes after a few seconds of viewing the video. But the audio keeps playing . I like iMovieHD 6 but I will revert back to iMovieHD 5 if I have to. Any help would be greatly appreicated.
iMac 800mhz 15 Mac OS X (10.4.9) 768 mb of memory

Wish I could take credit for it although early on I did get my iMovie project to work but was not observant enough to figure out what I had done. I was more in a panic about iMovie not working correctly and was on the phone with Apple at the time. Fortunately the "fix" was discovered and documented by someone on the QuickTime Discussion Forum! This problem is more a QuickTime issue instead of with iMovie.
I decided to take the Archive and Install route to revert back to QT 7.1.5 rather than use the sleep work around.
Sue
iMac G5 20 inch Mac OS X (10.4.9) QT 7.1.5

Ipod shuffle stops playing the song after a few seconds

Similar Messages

Maybe you are looking for