IPod Shuts down after starting it up....

Every time I start up the iPod on my iPhone, it crashes.... What can I do?

Have you tried basics from the manual?
Restart.
Reset.
Restore.
http://support.apple.com/manuals/iphone/

Similar Messages

  • My Mac book pro shuts down after starting

    My Mac book pro shuts down after a few second. I have to press the start button multiple time before uploading

    MacBook Pro (17 -inch, Mid 2009) OS X Yosemite Version 10.10.2
    Processor 2.8 GHz Intel Core 2 Duo
    Memory 8 GB 1067 MHz DDR3
    Startup Disk Macintosh HD
    Graphics NVIDIA GeForce 9400M 256 MB
    Serial Number W8******8YB
    Disk Utility Message:
    Repairing permission for "Macintosh HD"
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOSARDAge nt" has been modifiedand wil not be repaired
    Group differs on "Library/Printers/InstallerPrinters.plist";should be 80; group is 0.
    Permission differs on "Library/Printers/InstalledPrinters.plist" should be -rw-rw-rw ; tey are -rw-r---r--
    Repaired "Library/Printers/InstalledPrinters.plist"
    Group differs on " Library/Preferences/com.apple.alf.plist" should be 80; group is 0.
    Repaired "Library/Prefernces/com.apple.alf.plist"
    User differs on "private/var/db/displaypolicyd"; should be 0; user is 244
    Group differs on "private/var/db/dispaypolicyd:; should be 0 group is 244
    Repaired "private/var/db/displaypolicyd"
    Permission repair complete
    I was not able to fix the problem,
    TinTin 15
    <Personal Information Edited by Host>

  • What do I do if an iPod shuts down after going into sleep mode

    My friends iPod keeps shutting down after it goes into sleep mode. I just fixed it up (restored it, had to dry it out after it fell into water) and now it does that. Everything else works fine but if I put it in sleep mode or put it into sleep mode it shuts down. How do I fix this because I've never seen this happen before.

    Hey Tecmo_SB_Guy, 
    I would suggest you take a look at advanced power settings. It can seem like the notebook is turning off when it is actually just hibernating. You can set it to not hibernate. 
    1. Windows key + Q to open the Search Bar
    2. Type "power" 
    3. Click Settings under the Search Bar
    4. Select Power Options from the results on the left. 
    5. In Power Options, Click Change when the computer sleeps, on the left. 
    6. Set the Put the computer to sleep setting so that it fits your usage best. 
    7. Click Change advanced power settings, at the bottom.
    8. Expand Sleep and expand Hibernate after. If you want you can change the hibernation setting to Never by typing "Never" into the minutes field. See attached picture. You can do this for battery and/or plugged in.
    9. Click Apply to save changes.
    If you don't already shut it down periodically, I would suggest shutting it down at least 2-3 times a week if you use it daily. Leaving the computer running continuously can shorten its lifespan. Hard drive failures and motherboard issues are seen much more often on machines that are left running constantly. Computers get bogged down and run slowly when the memory is full. Memory only clears out and resets itself when the computer is shut down. Here is a link explaining more about memory accumulation and hardware aging.
    I hope these suggestions help! Please let me know if you have any questions
    Attachments:
    PowerHibernateNever.jpg ‏59 KB

  • Ipod Shuts down after song

    Hello all,
    I got an iPod Nano 3d Gen for my birthday 2 months ago.
    I uploaded songs on it, and a video or two.
    I everything was fine untill one day the iPod had shutdown after a song.
    First I thought it was just something that'd happen once, So I restarted it and selected a song.
    But again, the iPod would shutdown after the song was done.
    After that my iPod has not been working like it should be, always shutting down after a song was finished.
    I followed the 5 steps to fix most problems (Restart, Reboot etc)
    But the problem with that was that my computer did not see the iPod.
    My iPod would say it was connected for about 2 seconds, and then it would shut down again.
    The Computer Management window couldn't see it either.
    I tried almost everything I think, and nothing worked.
    So my question is this,
    Does anyone have the same problem?
    Or does anyone how to fix an iPod with these problems?

    Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i

  • Shuts down after start up screen

    Hi, Trying to help out a friend.
    Her lappy shuts down after the initial screen and sound.
    Power supply seems ok.
    Any suggestions?
    thanks

    I went to apple today and they told me that the hard drive has unmounted itself. They have my macbook right now and they said they're going to replace the wire that connects the hard drive to the logic board and see if this solves the issue. If it doesn't work they will replace the existing 250GB hard drive in my macbook with a 500GB as they no longer make that size hard drives (cost of £130 for the replacement). The problem is that i dont have my macbook backed up so will there be anyway to get data off the od hard drive?

  • IPod shuts down after playing music for 1 minute

    Whenever I try to listen to music or radio the device shuts down after exactly 1 minute. Can't find a setting to change this. I already did reset all settings, to no avail. Any help? Thanks!

    Make sure the headphones are plugged all the way in, meaning no silver from the headphone's plug can still be seen.  You shoul hear a sort of clicking noise when inserted the headphones to signal that they have been fully seated.
    B-rock

  • Mac shuts down after start up and before it was acting very slow, please help!!!

    Recently my imac has been running unusually slow when I open/close apps or when loading things, it sometimes would freeze or take about 20 secs to load etc.
    So in an attempt to fix it it cleared all unnecessary files from my computer but nothing too technical.
    Then yesterday i was told by my brother to go onto disk utilities and verify/repair the disk. Both times it failed and further repeats failed. After the repair disk failed a message along the lines of "back up data you want then restore the disk" something like that.
    Now today when I started up my computer in the morning it was fine, then a couple of hours ago I restarted it, and now it won't turn on properly. It goes to the apple icon with a spinning loading wheel and a empty bar underneath and after about 20 secs it shuts down. So then I did the thing where you hold down cmd and r to open osx utilities and went to disk utilities again to try and repair/verify the disk and again the same failure and messages came up suggesting to restore my disk.
    Being 16 I only understand so much and understand that I will probably have to put in the installation disk or something and "re do my computer from scratch." But I do have things I want to back up before I do so but due to the load up problem I have no way of backing up photos, music and files and i don't know if the time machine has backed up the data for me (I don't really understand the time machine). I'm currently using my phone to post this, any help would be greatly appreciated because I don't really know what else to do now. My imac is 21.5 inch that I bought around 2years ago late december time. Thank you for your time

    Sounds like a classic HD failure. Take the machine to your local Apple Store or AASP, if it is still covered by AppleCare they will handle it at no charge. If you have been backing up then once the machine comes back restore from backup. I get you are only 16, so I'd explain to  your parents the computer needs to be taken in for service, if they bought it for you they would know if it is covered by AppleCare or not, assuming they originally bought the computer for you.
    Good luck.

  • Shuts down after start tone and grey screen with pin wheel...!???

    Hi all, first time here so please bear with me,
    even though i have had my imac for so long now, i have only in the last three to four months started playing around with it, i really am a newcomer to macs, and pc's come to that! so far i have only connected up to the internet and put a couple of home video's onto dvd, and play music.
    i have been reading a lot of the other posts and frankly i'm lost!
    it is about 20 months old and was bought in the uk, i live in cyprus and for that reason i did not purchase an apple plan.
    we do not have an apple store here although there is an apple dealer, however they are not soley apple and over here service leaves a lot to be desired! so i am reluctant to take it to them as they are likely to just keep replacing parts and eventually present me with a huge bill!!
    anyhow this is the problem:
    several times the screen went dim and froze, with a message saying to "push the power button to switch off and and then switch on again", it seems this happened each time when i opened azureus? after this happened a few times it would no longer open the desk top, it would load normally,ie. grey screen with pin wheel followed by blue progress bar and then just a blank blue screen, the blue tooth mouse however was still connected as the cursor would move. it has now changed again! start up tone and grey apple screen with pin wheel for about 30secs or so, then the fan seems to go into turbo mode for a few secs before switching off....i feel sick!! i was really getting to like my mac.
    i did recently install tiger, but there were no problems at all with that and it is running on a friends apple with no problems at all, more recently i added more memory which coincided with when i started using torrentspy and azureus,
    i did read in another forum something about possible memory probs, so i followed the tip to remove the memory and the back up battery and leave the computer unplugged for 24hrs, i replaced the battery but not the memory, i'm still getting exactly the same shut down result.....
    can anyone shed some light on this pleeease? i'm feeling rather desperate right now.....thanks.
    imac G5 20inch Mac OS X (10.4) airport card fitted, 1.25gig mem.

    Hi ino,
    My suspicion is that you have serious hard drive directory corruption caused by the crashes when using azureus.
    First step is to see whether you can boot up from your Mac OS X DVD . Put it in the drive while its on, and start up the computer again while holding down the "c" key. The computer should now start up from the DVD.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar (which menu it is in depends on which version of OSX you are using).
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
    Once this process has been completed try restarting the computer.
    If it still doesn't work, you may have to try an "archive and install", while booted from the OSX DVD.
    Be very wary with software like "azureus".
    Cheers
    Rod

  • XServer shutting down after starting

    Hello
    I am absolute new user of arch-linux
    I have fedora 20 X86_64 as host and installed virtualbox and successfully installed archlinux in it
    I got confused in the section in Beginner's guide to install xorg
    I installed
    xorg-server xorg-server-utils xorg-xinit
    also
    pacman -S xorg-twm xorg-xclock xterm
    then installed
    virtualbox-guest-utils
    then added the following lines
    vboxguest
    vboxsf
    vboxvideo
    to
    /etc/modules-load.d/virtualbox.conf
    and the rebooted
    after logging in 'startx'
    and then its starting and is auto-shutting down.
    What I am doing wrong ????
    Last edited by Neon10 (2014-01-29 17:42:56)

    Well, without a .xinitrc file, you will end up using the default one in /etc
    The last five critical lines of that file are
    twm &
    xclock -geometry 50x50-1+1 &
    xterm -geometry 80x50+494+51 &
    xterm -geometry 80x20+494-0 &
    exec xterm -geometry 80x66+0+0 -name login
    That starts twm in the background, opens three xterm windows, and creates an xclock window.
    I still have a feeling you need to install xterm and xclock, please check.  If they were missing, I have no idea why you would not have an error message.
    Edit:  BTW, I realize you posted the logs and seem to have referred to those for the error messages about xterm or xclock being missing.  The errors would show up on the console after you ran startx
    Last edited by ewaller (2014-01-29 18:27:47)

  • IPod shuts down after white screen

    I just replaced my 5G's screen (original was cracked), but after starting up, the screen is immediately all white (apple logo or menu never shows up) for a couple of seconds, I hear the HD, and then it shuts down. I can not reset using apple's method as it just keeps restarting the same way with the white screen?
    Anyone have an idea of what could have gone wrong with my screen update? The instructions were pretty straight forward, and I followed them carefully.

    i believe that i damaged the connector somehow (no idea how), and have sent it in to get the logic board replaced.

  • The first generation mac pro shuts down after start up suddenly

    I have had mac pro since 2006 and have used it so many times without any problems starting up/booting successfully. Recently it was not booting well and i done pram clearance and worked for a while. Once after going into the desktop the screen just froze and i could hear a repeatitive clicking sound from the computer. I was able to shut down and did not use the computer for some time. i have tried to switch it on today and it goes through the normal dong sound and apple logo appears plus a grey bar underneath which fills to a bit and then there is a change in sound in the computer as if something coming to off and then there is the same repeated sound of faint clicking and the computer shuts down. can please anyone help me how to sort the problem out?

    Raj Karia wrote:
    how do i carry this operation out?
    Your machine info has changed from 10.6 to 10.3. No MBP ever shipped with 10.3, so I'm including directions for 10.6:
    Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications>Utilities>Disk Utility and run Repair Permissions.
    how do i open up the disk drive?
    Not sure what you mean by this.

  • Early 2008 MacBook pro immediately shuts down after start up

    Today, After shutting down my computer by holding down the power button (which I do quite often) my mbp shuts down immediately (about 1 second after) pressing the power button. After I press the power button the computer starts up i.e the fans start etc, but about 1 second later it shuts down again. I have tried resetting the SMC to no avail... Any help would be greatly apreciated. My os is leopard
    Message was edited by: Masons777

    Welcome to Apple Support Communities
    Is this happening on MagSafe/mains power or Battery ?
    If battery then it sounds like it's died, check System Profiler / Power to see what's showing for it.

  • Flash shuts down after start up screen - please help

    I had a strange problem develop yesterday. Whenever I start
    Flash 8 the start up screen shows for a moment, then disappears and
    the program shuts down and never starts. I ran Ad-Aware, Spybot,
    HijackThis and even did a file search by date to see if anything
    appeared on my computer that would cause this but I found nothing.
    I have Flash MX installed as well and it was doing the same thing
    when I tried that. I repair/installed Flash 8 - didn't work, then
    uninstalled Flash 8 and installed again and it's still doing the
    same thing. I suppose I could uninstall MX too and try again but I
    suspect that's not the problem. Any thoughts?

    Your capacitors are leaking, this is a known issue with Rev A G5 iMacs, and they should be replaced, along with the logic board. Take it in and if t stays up long enough, try to clone it to an external drive to save your data. I use SuperDuper! to do this.
    Let us know how you make out,

  • Computer shuts down after start up

    I have just updated my system and now its restarting, it goes to the startup and then i see the apple sign and i see a small bar underneath which is filling up, it doesnt even go half way and my macbook shuts down, this process is happening each time i am starting up macbook, i tried using command S and den trying to format, which does not work , i really need help on this matter

    Welcome to Apple Support Communities
    When your computer turns off with the progress bar on the display, it means that OS X is trying to repair your drive. If your Mac turns off, it means that fsck command couldn't repair the hard drive, so OS X can't start. Something happens with your hard drive.
    If you have an Early 2011 or newer MacBook Pro, hold Command, Option (Alt) and R keys while your computer is starting to start in OS X Recovery. Then, open Disk Utility, choose Macintosh HD in the sidebar and repair the drive.
    If it can be repaired, restart your computer and see if it can start. If not, you have to replace the hard drive.
    Take your MacBook Pro to an Apple Store or reseller only if your computer is in warranty or you don't want to do this yourself (the repair is free if it's in warranty). If it's not in warranty, have a look at a hard drive and install OS X on it. You can look for hard drives at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

  • Shuts down after start up

    17" imac 1.8 second generation
    Just started, never happened before. Starts up fine and then shuts down in a minute or two, every time.
    With cover off and plugged in 1st led light is on. Whenn internal power button is pressed, #2, then #3 light and machine starts up. Then shuts self down.
    Trying to figure out if this is power supply or something else. Thanks

    Your capacitors are leaking, this is a known issue with Rev A G5 iMacs, and they should be replaced, along with the logic board. Take it in and if t stays up long enough, try to clone it to an external drive to save your data. I use SuperDuper! to do this.
    Let us know how you make out,

Maybe you are looking for