Ipod sound stopped left

Ipod sound stopped left
Model: Classic 30GB

Just got my Ipod Nano 7th gen today; hooked it up via USB to my Jeep JK 2011. Error Occured message every time. Won't play any music, nothing.
Apple is awesome.

Similar Messages

My iPod Touch sound stops at the end of my videos

It started happening yesterday. I made recorded videos of stuff around me and the sound stopped working when it was starting to get to the end. I don't know what to do. Please help!

How did the iPod touch stop working?
If it just appeared to freeze and wouldn't respond to touch, try resetting your iPhone by holding the sleep button and the Home button until you see the Apple logo.
If that happens more than once, you'll probably want to restore the iPod touch.

My iPod shuffle stopped working at all. Nither my computer, no iTunes can recognize it. There is no any green light on it and no sounds. I can't charge it.

My iPod shuffle stopped working at all. Nither my computer, no iTunes can recognize it. There is no any green light on it and no sounds. I can't charge it.

Try:
Turn on without Home/Power Button

Ipod sound only works for right ear

Hello. I have an Apple Ipod 5th generation. I have had it for a few months now. Lately, the right channel sound stopped working. Only the left ear works. It does not matter which headphones I use. If i pull the headphone jack out a little bit, I get mono in both ears. I have tried cleaning the headphone jack with a cloth covered screwdriver and alcohol. It made no difference.
Any suggestions, short of replacement of the headphone jack on the Ipod?

You should still have your warranty. Its for one year...found this out after my one year had expired so if you send it back to them you're still covered.

After restoring iPod it stops syncing half way

After restoring iPod, it stops syncing while it is downloading music with an error message "Attempting to copy to the disk. iPod failed. The disc could not be read from or written to".
My music is less memory than what my iPod can hold.
What's up with this?
THX!

It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

Sound stops during games

Randomly my sounds stops during most of my games. Clash of clans my sound will fade in and out like its trying to work properly, but other apps are just muted completely. If im listening to music while playing a game, it seems to happen more often. ALL sound is stopped, i have to exit my app to turn the music back on. This happened after i synced some music. It was TERRIBLE, but i managed to sync it 3 or 4 more times to try and correct the problem, it helped but didnt fix it. One day my sound wouldnt even adjust. Something is seriously wrong with this OS. This has been a problem since iOS7. And i was syncing my wifes new Justin Timberlake, apparently the iPod hates him as much as i do.

NoSound problem with headphones? With speaker?
If only with headphones have you tried another pair of headphones?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

No sound in left headphone

This is my first macbook.
Mine is Macbook Pro 13" 2.3 GHz Intel Core i5.
OS is OS X 10.6.8.
It was ok at the beginning but there has been no sound in left headphone from the some point which I don't remember.
My headphone works fine when it is connected to other devices like iPhone.
And left/right balance on Sys Pref is also in center.
This is very irritating for me.
Did anyone have the same problem and fix it?

sorry i am not so good with computers etc so this is maybe not help to you but this is just telling my experience=)
I had the same thing which happened but on my ipod and i took it to the apple store, and the person told me there are 2 connectors in the socket one for each earphone, and one was knocked out of place so they gave me a new iPod
maybe they will do the same for your macbook=)

Internal soundcard - Logic 8 - cracking sound/stop/reboot/go

I'm having issues with the built in sound card of my Macbook Pro C2D 2.2. It happens more often lately. In Logic with just a few midi tracks and one simple loop sometimes I hear a strange cracking sound coming mainly from the left side of my MBP and the sound stops. Logic keeps on playing but the internal sound just overloads. It's not that overload message. I can reboot the soundcard by making changes in the logic preferences, I click apply and I hear that cracking sound again - the built in sound works for a couple of minutes and then goes nuts again. Restarting OS X doesn't help. It is frustrating. I don't use the internal sound a lot with Logic, but I want to be ale to do so. If anyone can help on this one, I'd really appreciate it. Thanks.

I forgot to mention that changing the buffer size doesn't help...

Why my Ipod suddenly stop working

Why my Ipod suddenly stop working.
I was looking picture then I left my Ipod for 30 second then total death

Is it still charging if you use the adapter?
Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
Did you try to connect in recovery mdoe? iPhone and iPod touch: Unable to restore

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Ipod Sound Is Weird...

Okay so about a week ago my iPod jsut stopped doing sound altogether...i plugged it into my computer and did the 5 R's and now the sound was fine for a while. Last night while trying to watch a movie...I noticed that random songs are playing during the movie. While someone is talking the song is playing loudly and the movie is just like background noise. The way it sounds it makes me think that it would be some sort of a setting, but I dont know what setting it would be.
5th Generation Mac OS X (10.4.7)

I have the exact same problem. My post was the one titled Please Help Me!!!!!!!!. I'm not sure what to do, but if I find out I will let you know. Will you do the same. Thanks
sony vaio Windows XP

HT1459 4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Alert sounds stopped working

My email, WWF, etc. alert sounds stopped working on my Ipad2, suddenly, for no reason. I tried resetting the system 3 times and that did not hellp. The OS is up to date. The do work if I 'test' them, though. And, my sound works fine on videos, etc.
Any suggestions? It is past the warranty period
PamL7

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

AUDIGY 2 ZS: Sound stops working when loading ga

Hello, I recently upgraded my CPU/mobo and reformatted. Ever since then I've been having a few problems with my sound. I'm using the Audigy 2 ZS. I have the latest drivers off the website. Yes, I have disabled the onboard audio in the BIOS and there are no drivers for it installed in Windows. And yes, I have the latest version of DirectX and SP2 and everything else from Windows Update.
- I'll play Mp3's in Winamp - using both the DirectSound and waveOut output methods - and the music will play fine. Windows system sounds and AIM sounds play find with this too. When I launch any game however, the sound shuts off.
For example, I'll load World of Warcraft, and the music will stop playing, when I exit the game the music resumes. Even stranger I noticed that when I WoW is running, the speaker configuration randomly gets changed from headphones to stereo speakers. Changing it back via Creative Audio Console caused the audio console to hang. Trying to change speaker configuration via Windows did nothing. and yes, I checked to ensure my soundcard was selected as the proper playback device, the volume was up, not muted, etc...
When I run Neverwinter Nights 2, the sound will shut off for the into logo screens and the intro scene. My Mp3 music from Winamp WILL resume playing at the main menu, however, the volume becomes noticeably less. Exitting the game restores the proper volume level.
Even stranger - if I run NW2 followed by Warcraft, my music will play during WoW, but at a lowered volume similar to Neverwinter nights 2. If I then quit WoW and restart WoW, I am back to no music. Strangely it seems just to get the low-volume music to play during WoW, I have to have previously run Neverwinter Nights 2.
To summarize:
- Music and Windows sounds stop altogether while running World of Warcraft
- Music and Windows sounds play at much lesser volume during neveriwnter nights 2, and not at all during intro
- sound works in warcraft, but at a lower volume, ONLY if I'd run neverwinter just before runnign warcraft
- similar buggy low volume / no music at all problems in Medieval 2 Total War
- one time I had my music become all distored and start skipping/ slowing down when I was trying to reset the speaker configuration back to Headphones when it was magically changed to stereo speakers.
I highly doubt it's a problem with the games - I've been playing these games and using Winamp and my Audigy 2 ZS for quite a while now, and never had a problem with any of my games screwing around with my WIndows sound levels or cutting it off altogether. I'll keep updating as I install more softwareMessage Edited by xagent on 0-09-20070:9 AM

Could it have anything to do with the fact that the drivers I downlaoded were off the Creative website?
I'm currently on WInter break for a couple more weeks, and left my Audigy 2 ZS CDs back at college. But I don't see why the latest Audigy 2 drivers from the Creative website should be faulty.
oh, and I'm running Win XP Pro

Sound stops and restarts randomly

Hi to all,
For some time now I am having a problem with the sound in my Mac book pro:
- when I am listening something, either in iTunes, YouTube, etc, the sound stops and a red light flashes in the earphones plug. When I check in the Sound Preferences menu, it says that the output sound is no more associated with the computer speakers but with the earphones plug. And this preference is not possible to change... I don't have more options!
I don't know if I make myself clear, sorry for that!
What can I do please! This is very annoying and powerless!
Thank you for your attention!

Only to try restoring the iPod to factory settings.

Ipod sound stopped left

Similar Messages

Maybe you are looking for