Ipod Sounds Problem (Noise) OMG PLS HELP !!!

Ok guys,
I have a Ipod Classic 80G ...
All the functions works fine, songs, sync, movies, pictures (yay) !
But i week ago my ipod start to make a noise sound when i play my musics/movies !
The noise sounds is similar when ur listening to a very bad quality song ...
To understand the song i have to put the volume at MAX, but comes out really LOW and all noise and if i put the volume in LOW ... well cant hear nothing ... only noises !
I cant say if im the responsable for that prob ... cuz its all started when my Ipod battery got at 0% ... so i was recharging the battery and my pc crashed and Ipod disconnected and after that THIS PROB started ><
Firts i restored the Ipod ... lose all songs/movies/pictures =(
But the problem still happening ...
I tried squeezing the top right corner but no quality restored ...
So wut should i do to fix this problem ? Someone pls enlight meh here !
Should i take to Ipod's specialist ? or a Hammer will do the job ? Just Kidding xD
Perhaps the Sound Board got screwed !?
Thanks in Advance
Jo

I have this same problem! From what I have read so far it seems to be the headphone jack that is the issue. Apparently you can change these out but I don't know if I am brave enough to try it.
I did have some luck with pulling the headphone plug out a bit. This seems to be a temporary fix but really in this case you are no longer connected and it is easy for the plug to fall out of the jack.
Good luck to us both, I guess!!

Similar Messages

I am not able to connect with another ipod via bluetooth can u pls help me

i am not able to connect with another ipod via bluetooth can u pls help me

Are yo trying to pair via an app that supports BT pairing? If you are I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

Again same problem error 0xE8000003 pls help again i don't know it keep doing that

Again same problem error 0xE8000003 pls help again i don't know it keep doing that please help with that

Hello sartip fatah,
The following article provides further information regarding this error, and steps to help resolve it.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/TS3221
Cheers,
Allen

Earpiece problem!! pls help!!

my earpiece got a serious problem!!the left side is brust and is louder than the right side..PLs help!!can i hav it repair or do an xchange with apple !!! thks

i'd like to ask if you played with the volume way up high for quite some time?...at first i tried testing the earphones to its limit...it did respond well...nothing happened...after that i limit the volume to a comfortable range...not after a friend tried it out and not to my knowing he pumped up the volume way up...after he returned it and when played to a 95 percent volume the right bud would give a distorted funny sound...but its still okay when played to a 80 percent range volume...and no, you cannot have a busted earphone fixed..(as far as what ive heard)its better to replace it with a new one...happy holidays!

Problem in answerMachine pls help me

Hi All my problem is exactly when u detect dtmf char can not stop playying wav file the code is below
import java.net.*;
import javax.telephony.*;
import javax.telephony.events.*;
import javax.telephony.media.*;
import javax.telephony.media.events.*;
import java.io.*;
//class MachineCallObserver implements MediaCallObserver {
class MachineCallObserver implements CallObserver {
public void callChangedEvent(CallEv evlist[]) {
TerminalConnection tc = null;
MediaTerminalConnection mtc = null;
for (int i = 0; i < evlist.length; i++) {
CallEv ev = evlist;
if (ev instanceof TermConnCreatedEv) {
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
String sExt = ".wav";
try {
mtc.usePlayURL(new URL("file:./greet" + sExt));
//mtc.useRecordURL(new URL("file:./Treeting" + sExt));
catch (Exception excp) {
System.out.println("(1)"+excp.toString());
else if (ev instanceof TermConnRingingEv) {
final TerminalConnection tcc = ((TermConnEv)ev).getTerminalConnection();
Terminal t = tcc.getTerminal();
Address a[] = t.getAddresses();
// For the callers name
//setTitle(t.getName()+"bilal");
// For the callers phone number
//lblMisc.setText(a[0].getName());
System.out.println(a[0].getName()+"bilal");
Runnable r = new Runnable() {
public void run() {
try{
tcc.answer();
catch (Exception excp){
// Handle answer exceptions
System.out.println( "hata2");
Thread T = new Thread(r);
T.start();
try {
tc.answer();
catch (Exception excp) {
System.out.println("(2)"+excp.toString());
else if (ev instanceof MediaTermConnAvailableEv) {
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
mtc.setDtmfDetection(true);
mtc.startPlaying();
if (ev instanceof MediaTermConnDtmfEv) mtc.stopPlaying();
catch (Exception excp) {
System.out.println("(3)"+excp.toString());
else if (ev instanceof MediaTermConnStateEv) {
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
int state = mtc.getMediaState();
//if ((state == 0) && (MediaTerminalConnection.PLAYING == 0)) {
//mtc.startRecording();
catch (Exception excp) {
System.out.println("(4)"+excp.toString());
else if (ev instanceof MediaTermConnUnavailableEv) {
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
mtc.stopRecording();
mtc.stopPlaying();
mtc.setDtmfDetection(false);
catch (Exception excp) {
System.out.println("(5)"+excp.toString());
else if (ev instanceof MediaTermConnDtmfEv) {
String sExt = ".wav";
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
mtc.stopPlaying();
catch (Exception excp) {
System.out.println("(6)"+excp.toString());
char digit = ((MediaTermConnDtmfEv)ev).getDtmfDigit();
System.out.println("detected DTMF: " + digit);
switch (digit) {
case '0':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./zero" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(7)"+excp.toString());
break;
case '1':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./one" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(8)"+excp.toString());
break;
case '2':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./two" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(9)"+excp.toString());
break;
case '3':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./three" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(10)"+excp.toString());
break;
default:
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./greet" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(11)"+excp.toString());
break;
please help me in this problem , if you u can pls help me

> Hi All my problem is exactly when u detect dtmf char
can not stop playying wav file the code is below
import java.net.*;
import javax.telephony.*;
import javax.telephony.events.*;
import javax.telephony.media.*;
import javax.telephony.media.events.*;
import java.io.*;
//class MachineCallObserver implements
MediaCallObserver {
class MachineCallObserver implements CallObserver {
public void callChangedEvent(CallEv evlist[]) {
TerminalConnection tc = null;
MediaTerminalConnection mtc = null;
for (int i = 0; i < evlist.length; i++) {
CallEv ev = evlist;
if (ev instanceof TermConnCreatedEv) {
tc =
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
String sExt = ".wav";
try {
mtc.usePlayURL(new URL("file:./greet" +
./greet" + sExt));
//mtc.useRecordURL(new
ordURL(new URL("file:./Treeting" + sExt));
catch (Exception excp) {
System.out.println("(1)"+excp.toString());
else if (ev instanceof TermConnRingingEv) {
final TerminalConnection tcc =
on tcc = ((TermConnEv)ev).getTerminalConnection();
Terminal t = tcc.getTerminal();
Address a[] = t.getAddresses();
// For the callers name
//setTitle(t.getName()+"bilal");
// For the callers phone number
//lblMisc.setText(a[0].getName());
etName());
System.out.println(a[0].getName()+"bilal");
Runnable r = new Runnable() {
public void run() {
try{
tcc.answer();
catch (Exception excp){
// Handle answer exceptions
System.out.println( "hata2");
Thread T = new Thread(r);
T.start();
try {
tc.answer();
catch (Exception excp) {
System.out.println("(2)"+excp.toString());
else if (ev instanceof
anceof MediaTermConnAvailableEv) {
tc =
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
mtc.setDtmfDetection(true);
mtc.startPlaying();
if (ev instanceof MediaTermConnDtmfEv)
onnDtmfEv) mtc.stopPlaying();
catch (Exception excp) {
System.out.println("(3)"+excp.toString());
else if (ev instanceof MediaTermConnStateEv) {
tc =
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
int state = mtc.getMediaState();
//if ((state == 0) &&
e == 0) && (MediaTerminalConnection.PLAYING == 0)) {
//mtc.startRecording();
catch (Exception excp) {
System.out.println("(4)"+excp.toString());
else if (ev instanceof
anceof MediaTermConnUnavailableEv) {
tc =
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
mtc.stopRecording();
mtc.stopPlaying();
mtc.setDtmfDetection(false);
catch (Exception excp) {
System.out.println("(5)"+excp.toString());
else if (ev instanceof MediaTermConnDtmfEv) {
String sExt = ".wav";
tc =
tc = ((TermConnEv)ev).getTerminalConnection();
mtc = (MediaTerminalConnection)tc;
try {
mtc.stopPlaying();
catch (Exception excp) {
System.out.println("(6)"+excp.toString());
char digit =
digit = ((MediaTermConnDtmfEv)ev).getDtmfDigit();
System.out.println("detected DTMF: " +
TMF: " + digit);
switch (digit) {
case '0':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./zero" +
file:./zero" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(7)"+excp.toString());
break;
case '1':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./one" +
"file:./one" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(8)"+excp.toString());
break;
case '2':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./two" +
"file:./two" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(9)"+excp.toString());
break;
case '3':
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./three" +
ile:./three" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(10)"+excp.toString());
break;
default:
try {
mtc.stopPlaying();
mtc.usePlayURL(new URL("file:./greet" +
ile:./greet" + sExt));
mtc.startPlaying();
catch (Exception excp) {
System.out.println("(11)"+excp.toString());
break;
please help me in this problem , if you u can pls
help me
hi my frinds this is code with out italic font

UnsatisfiedLinkError Problem.(Urgent)Pls Help!!

Hi,
I just want to run a swing under win98 OS platform and an error message appeared :
Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\jdk1.4\jre\bin\awt.dll: An attempt was made to load a program with an incorrect format
I have changed different version of JDK including 1.3.1 and 1.4beta, but the problem still exists.
Is that any special setting need for running interface as I can run the java program in no trouble at all if there is no any interface.
Another thing when i double click the java plug-in, there is an error message: "Could not found the main class. The Program would exit. ". How come?
Pls Help and many thx.

Post you code.

Problem with Eclipse -- pls help

hi
When i execute the application in debug mode with one break point :
These are the errors i get and the compiler is not stopping at the break point .
Pls help :
Thread [main] (Suspended (exception ClassNotFoundException))
     ClassLoader.findBootstrapClass(String) line: not available [native method]
     Launcher$ExtClassLoader(ClassLoader).findBootstrapClass0(String) line: not available
     Launcher$ExtClassLoader(ClassLoader).loadClass(String, boolean) line: not available
     Launcher$AppClassLoader(ClassLoader).loadClass(String, boolean) line: not available
     Launcher$AppClassLoader.loadClass(String, boolean) line: not available
     Launcher$AppClassLoader(ClassLoader).loadClass(String) line: not available
     Launcher$AppClassLoader(ClassLoader).loadClassInternal(String) line: not available

If the compiler is not stopping at your breakpoint, then it probably means that the java code you're looking at and the compiled class file are out of synch. If you're getting a classnotfound, then your classfile most likely is either not there or is not where expected.
Check the output folder in project's properties (which may or may not be the default), and see if your classfiles are actually there. Perhaps there is some error that is preventing your classfile from being generated (Eclipse sometimes won't even be able to compile), so check the problems dialog.
Try refreshing your project, and if all else fails, restart Eclipse/delete & create the project again. That sometimes magically fixes things. Otherwise, welcome to the quirkiness of dealing with Eclipse!

NetBeans Problem with package, pls help.....

Hi all, I have a package problem. With the following 2 classes, I can compile fine in dos with
c:\java> javac WapDev3\*.java
but wont compile in Netbeans 3.4 Pls help.
The classes are
-------------------class sample1 at c:\java\WapDev3------------------
package WapDev3;
class sample1 {
public sample1() {
System.out.println("hi");
--------------------class sample2 at c:\WapDev3------------------
package WapDev3;
class sample2 {
public sample2() {
public static void main(String[] args) {
sample1 osample1 = new sample1();

I don't know for certain whether this is causing your problem, but in Netbeans, the package structure is considered to be identical to the directory structure, relative to the mountingpoint, so if your files are in java/wapdev, Netbeans wants you to make the package java/wapdev.
This can be cured by mounting a subdirectory, using a relative mounting point.
In your case, you should mount C:\java (I assume you've mounted C:\).
Good luck.

Omg pls help me!!

I have an 80g ipod classic, and i'm using a pc. Itunes was working fine then one day it stopped connecting to my ipod. Windows recognizes it's there but no itunes. Pls help
Hope this helps too...
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
ASUSTeK Computer INC. A7N8X-X
iTunes 7.6.1.9
QuickTime 7.4.1
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.4.7
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number EB85F978361FF823
Current user is an administrator.
The current local date and time is 2008-02-26 16:23:25.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce 6200
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {08D0B054-4BE6-4FA1-859E-BA95476D4D53}
Description: NVIDIA nForce MCP Networking Adapter - Packet Scheduler Miniport
IP Address: 192.168.15.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.15.1
DHCP Enabled: Yes
DHCP Server: 192.168.15.1
Lease Obtained: Tue Feb 26 16:17:53 2008
Lease Expires: Tue Feb 26 17:17:53 2008
DNS Servers: 192.168.15.1
192.168.15.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-02-26 16:19:54.
** iPod/iPhone Connectivity Tests **
iPodService 7.6.1.9 is currently running.
iTunesHelper 7.6.1.9 is currently running.
Apple Mobile Device service 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
BEN'S IPOD (E:\), iPod classic running firmware version 1.1
Serial Number: 8N740MU6YMV
Bus Speed: 61440
** iPhone/iPod Touch Sync Tests **
One or more sync tests failed.

Since you can only transfer songs from your computer to the iPOD and not the other way around, there is no official way to get them back onto your computer.
Not sure what can be done to save your music library if it was erased by a virus. I save a backup of mine on an external drive just to be safe, although I run OSX so the virus issue isn't the reason.
Maybe there is some shareware for Windows that lets you offload an iPOD to a computer?
Perhaps someone else on here knows.
Good luck.

Workflow problem...pls help

Hi
I have requirement to deliver a single workitem to multiple agents. I am working on workflows for the first time and do not know how to send workitems and that too to multiple agents. Can anyone pls help.

In classic workflow tasks just set the AGENT to the list of people you wnat to send the work item to.
Use the standard "Mail" type picture i (the envelope shape) in the Workflow builder for the forward work item steps.
Be careful however that even if you do send a work item to multiple agents once one person has "reserved" the item it will disappear from all the other agents inboxes until the workitem has been completed.
Cheers
Jimbo

Simple calculation problem...pls help

i have 2 report blocks in my report.
the query for report block 1 is
select emp_name,sal sal1 from emptable where emp_num=7167
the query for the next report block is
select emp_name,sal sal2 from emptable where emp_num=7168
both the reports query the same table and get the same number of records.
i want the difference of sal1-sal2...
how do i do it..
pls help....

You could do salary diff calculation in a pl/sql function, and create the ref cursor query based on the function.
Thanks,
-Shaun

HT4623 unable to play external music on my ipod touch.....nor during apps sound without hear phones pls help.

please hepl unable to hear external sonund...tried restore but no use hoping something useful from u..

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

IPod Sound Problems - Through Universal Dock

When my iPod is docked to my PC for charging it generates bleeping noises which mess up the sound of any playback.
Examples below are recorded from the Line Out of the iPod dock (which is usually connected to the aux in on my speakers) , The dock is connected to the PC by USB (The problem is exactly the same with firewire).
Noise audible whilst charging http://www.chrismb.plus.com/Ed/charging.wav
Noise audible during playback - http://www.chrismb.plus.com/Ed/playing_connected.wav
Noise audible during playback - Firewire/USB cable is disconnected about 21secs in - http://www.chrismb.plus.com/Ed/playingconnecteddisconnected.wav
I don't have a clue why it does this - but it means that to listen through the dock I have to stop it from charging.
Any Ideas?
A64 4000+, BFG 7800GTX, 2GB Ram, WD Raptor 74gb, Maxtor 300gb 16mb cache iPod Video 60gb Black

It only makes these noises when charging from USB / Firewire - the problem does not occur when using my Logic 3 AC adapter.
How Odd.

I have a sound problem can any one help?

hey i'm new here i just got my ipod mini in jan. well my apple headphones broke so i justed used my other ones well now i used them up until today when i went to use my ipod no sound came out it was playing but no sound came from the headphones so i tried my old apple headphones but no luck i tried a tons of different headphones but nothing is working. i would be so so greatful if anyone could help thank you for you time
God Bless
brooke

Hi TheGirl,
Welcome to Apple Discussions
You might want to look at iPod - Service FAQ, or go to your local Apple Store/Reseller. If you iPod is still covered under the warranty, you can get new ones for I believe no cost. I would check on it before you do anything.
Jon

Ipod Nano Problem sync/playing - Any help greatly appreciated

I've looked through the forum for others with problems but none seem to match mine. I am here on behalf of my girlfriend who has had a nano for christmas and up to now been using it fine, but this morning she tried connecting it to the computer and when she plugged the cable in it gave the "synchronising" message with the rotating arrows but then after a few seconds just gives the "safe to disconnect" message and goes back to the main screen, without even appearing on itunes. on top of that, the ipod will not play any songs, when you push play the icon changes in the corner to say its playing but the time bar stays in the same position and no music can be heard.
I have tried resetting the ipod, going into disk mode, using diagnostics mode. restarting the computer, using another usb port, reinstalling itunes. nothing is shifting it. cant format it or restore as it doesnt get to connect to itunes in the first place. any help would be amazing as i dont want to have to send it back to apple. thankyou.

I've looked through the forum for others with problems but none seem to match mine. I am here on behalf of my girlfriend who has had a nano for christmas and up to now been using it fine, but this morning she tried connecting it to the computer and when she plugged the cable in it gave the "synchronising" message with the rotating arrows but then after a few seconds just gives the "safe to disconnect" message and goes back to the main screen, without even appearing on itunes. on top of that, the ipod will not play any songs, when you push play the icon changes in the corner to say its playing but the time bar stays in the same position and no music can be heard.
I have tried resetting the ipod, going into disk mode, using diagnostics mode. restarting the computer, using another usb port, reinstalling itunes. nothing is shifting it. cant format it or restore as it doesnt get to connect to itunes in the first place. any help would be amazing as i dont want to have to send it back to apple. thankyou.

Ipod Sounds Problem (Noise) OMG PLS HELP !!!

Similar Messages

Maybe you are looking for