IPod spazzing out

I've had problems with my iPod before, but this is unlike anything else....
It usually happens when I first turn the iPod from a complete charge. When I turn it on, it starts spazzing out. It goes back and forth through menus, songs, and turns the backlight on and off randomly. The entire time, it's making weird beeping noises (actual sounds, not from the headphones) and I listened to the hard drive...it's spinning like crazy. Eventually, the contrast is reset really low. It sorts itself out after a few minutes if I leave it alone, but this is really frustrating...
Any help / ideas are appreciated.

Try restoring your iPod with the iPod Updater and see if that resolves things.
Note Restoring erases all data on your iPod so please back up your music!
~Lyssa
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

Similar Messages

  • How do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

    how do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • Is it possible to transfer music between iPhones and iPods with out using iTunes

    Is it possible to transfer music between iPhones and iPods with out using iTunes

    Nope.  Both require iTunes on a computer to sync music from.
    Unless the iPod is an iPod Touch and the music was bought from iTunes.  In which case the Touch can simply go to the iTunes App, under Purchased  and download the purchased songs for free.

  • My old computer had itunes and downloaded songs that I put on my ipod. My old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out and will not activate. How can I get access to my old songs on new computer.

    My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.

    Downloading past purchases from the App Store ... - Support - Apple

  • HT201269 my pc crashed and i no longer have the music i used to have, how can i sync my ipod  w/ out loosing  all of my  music.  and also how do i update  my ipod only has  a partial version of ios4

    My pc crashed and i no longer have the music i used to have, how can i sync my ipod  w/ out loosing  all of my  music.  and also how do i update  my ipod only has  a partial version of ios4

    It has always been very basic to always maintain a backup copy of your computer for this very occasion.  USe your backup copy to put everything on the new computer, then sync.

  • My ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours.

    my ipod 4th gen gets wiped clean of music anytime I sync. it then only redownloads some of the music in the library and wont upload missing songs.  They show on the ipod grayed out. How do I get this to stop? re-uploading takes 4 hours and is never completed.  I only get some of the 6000+ songs I have. This started when I updated to IOS5 i think.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Youtube videos spazzing out and freezing

    Hi
    Sometimes when I have a youtube video in another tab and then go back into that tab, the video will show the same image (as if it were paused, except the sound continues) and/or showing other images spazzing inside of the video (zooming in and out). The latter happens more frequently when I'm on a youtube playlist or have multiple youtube videos opened (not all playing). The latter is quite rare, however, and I had only gotten it twice before I started finding a way to reproduce the former problem. Both can occur independently of each other. I can't remember this happening to me on my old arch linux install (on the same computer), which had the same driver and browser.
    I'm on a relatively new arch linux system (about 3 days old) so I barely have anything installed.
    This is some of the stuff I have installed that might be relevant:
    - Desktop Environment: Cinnamon
    - Browser: Chromium
    - Video driver: ATI (xf86-video-ati)
    - flashplugin 11.2.202.291-1
    Reproduction of problem:
    1. Open Chromium
    2. Open Youtube
    3. Open three videos in a new tab from the front page
    4. Close Youtube front page window
    5. Wait for all videos to start
    6. Pause all videos
    7. Start video in tab #1
    8. Click 'Youtube' in the left corner in tab #1 for home-page
    9. Click a video
    10. Let the video load and then either pause or let it play.
    Now both videos from tab #1 and #3 are frozen (sound is still playing) with a white frame, picture from another website (if I tabbed to it from that website) or a picture from the video. Sometimes it's spazzing out with another video zooming in and out inside of the video frame.
    Regards,
    Surculus
    PS. the problem can happen in with e.g. two youtube windows open, I just wrote one that always worked for reproducing the problem.

    Hi BKLive
    My problem is not that flash crashes. The sound is still playing, but the video freezes in place or is replaced by an image from another website in my tabs (that I would then have tabbed out of to get to the Youtube video). I tried the suggestions that were given in those forum posts, but they did not solve the problem. The only thing that 'fixed' it was using gnash. However, I do not want an infurior alternative that will negatively affect my experience watching youtube but rather to solve the problem. Unless of course there's an alternative that functions better than the default youtube flash player.
    Regards,
    Surculus

  • HT1605 How do I get my ipod nano out of deep discharge?

    How do I get my ipod nano out of deep discharge?  I have stored it for over a year and it won't work without being plugged in

    Hi pjlmserl,
    Thanks for visiting Apple Support Communities.
    I'd suggest resetting your iPod nano, and if the issue persists, restoring it:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    Restoring iPod to factory settings
    http://support.apple.com/kb/HT1339
    Regards,
    Jeremy

  • How to get an ipod touch out of recovery mode.

    I want to get my iPod Touch out of recover mode and i don't know how I got into it.
    All that happened was that my iPod Touch ran out of battery, so I plugged it into my MacBook and when it turned on I just got the Connect to iTunes screen.
    I tried turning it off and then on again but to no effect.
    I also tried holding down the Home and Power button until the apple logo shows up then release but that still did not work.
    What should I do to get it out of recovery mode without restoring??

    If re-starting the AMDS driver doesn't work, you can try removing iTunes and AMDS, then re-installing iTunes (which will re-install AMDS).
    If that doesn't work, try putting the Touch into DFU mode. You kind of mentioned it above where you held the buttons down while connected to iTunes, but it didn't sound exactly correct and it can be a little tricky to get the timing down.
    While having the Touch connected to the computer (and iTunes running) hold the Sleep and Home buttons until the Touch screen goes black (about 10 seconds). When that happens release only the Sleep button -- keep holding the Home button until iTunes says it found a device in recovery mode. At that point you release the Home button and will have to Restore the device, and you can try re-loading your last backup after the Restore process completes.

  • Can I still download iPod software updates? iPod is out of warranty.

    Can I still download iPod software updates? iPod is out of warranty.

    Can I still download iPod software updates?
    Yes, assuming they're compatible with that iPod model. iOS 4 can't be used on the original iPod touch.
    iPod is out of warranty.
    This only affects how long Apple will freely provide technical support, repairs to, or replacement of the device.
    (55217)

  • TS4006 If my ipod is out of battery will it still play the sound?

    If my ipod is out of battery will it still play the sound?

    No.  It has to be turned and connected to wifi.

  • Playbook Spazzes Out When Connected from HDMI to TV - Help

    I have tried this a handful of times before and after OS2 released, hoping the new OS would be the fix. Whenever I connect my playbook by HDMI to my TV, it spazzes out completely. The playbook will open web pages, open and chage settings in the main menu, open applications... It is just doing a lot of "ghost" activity very quickly. I cannot find much info out on the web about similar issues. Playbook never does this in any other circumstances and my TV is new and works fine on other devices. HDMI cable is also new and works with other devices.
    I appreciate the help of any Blackberry Gurus out there!

    Is your tv grounded properly? Are you using the supplied playbook charger? Or just hdmi when this happens? I know weird stuff happens when using the wrong charger, my wife tried to use a LG charger and it did weird stuff like that. The output was real dirty on a scope.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • IPhone 4 typing on its own; and spazzing out

    This is a major problem that has been occurring over the past week or so.
    Happening from once to four times per day, my one year old iPhone 4 will do something quite strange and abnormal.
    When I type anything; whether its on an app or just texting; it will either delete the sequence of letters or start typing and repeating letters on its own. Also, when I press any kind of button, the screen will spazz out in a way, and the button won't be pressed, another button in the close location to the button that was supposed to be pressed will be pressed.
    I searched online for answers aside from apple.com, my last resort, and they all said to restore to factory settings.
    I did do this, but this didn't work, because the first thing that happened when I typed in my wi-fi password for the first time was that it started to repeat A's, @'s, and O's. Then it seemed to stop.
    This is now preventing me from logging into my restored phone because I can't pass the setup guide with the problems that are occurring.
    For a while I was predestined to get a new phone, but then I realized I could just fix it. I guess not.
    Somebody with the answer to this question, please respond, because it does seem that this question is somewhat frequent upon the community.
    Thank you.

    Auto responsive, non responsive, and random responsive screens have been discussed a number of times.  If power off/on and soft reset do not work and restore does not work the alternative is the Apple genius bar to have it checked out...if the screen is faulty they usually just replace the unit rather than repair.  If there is a cost it depends on warranty/AppleCare status.

  • My Might Mouse is spazzing out!

    Hi! We got a Mighty Mouse with our iMac (flat screen) about a year and a half ago. Several months ago, the mouse started causing weird problems. For instance, when there is more than one window open, the windows just start voluntarily deciding to jump to the front. Or sometimes all of the windows will sort of fade to the background so that I can see them all, but none of them are front and center. It's so aggravating! I'll try to shut one of the windows, and just as I get the cursor to the little red dot, the windows decide to switch. Occasionally this has happened when I'm not even touching the mouse.
    So, anyway, we pulled out an old mouse (not Mighty Mouse) and used that for several months. Well, we finally decided to replace it with a new Mighty Mouse, and as soon as we plugged it in, it started doing that spazzing out thing again! It never did it with the old, non-Mighty Mouse mouse. So, does anyone know what the problem is? Is it a problem with Mighty Mouses, or am I doing something wrong with the Might Mouse? Has anyone else run into this problem? I'd appreciate any and all suggestions. I still have the receipt and I can return it, but I don't want to buy another Mighty Mouse if there is a problem with all of them. TIA

    Since I don't have a Mighty Mouse with my Macs,
    the disadvantage in my reply is not being able to
    try this out ahead of time to see if I can duplicate.
    This original 'flat panel' forum, is about iMac G4s.
    Yours must be a newer Intel iMac. But the control
    panel should be similar enough to check this out.
    With the Mighty Mouse, do you see any different
    control panels to make settings in the Sys Pref
    under either the Keyboard & Mouse, or another?
    How are the settings under Universal Access
    when the Mighty Mouse is attached? You may
    have options there which are affecting this item
    when it is attached; and not a regular mouse.
    Mouse (and trackpad in portables) offer settings.
    These in Universal Access can affect actions.
    Also, an older Mighty Mouse may have other
    issues after some time - a required cleaning.
    Good luck & happy computing!
    edited.

  • How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred

    How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred.
    Been trying all night to sort out but just going around in circles

    I have not seen a solution for that error but try:
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

Maybe you are looking for

  • DSC 8.6.1 doesn't log alarms

    My alarms are not being logged in DSC 8.6.1. I can tell that the alarms are being properly generated when I monitor them in the Distributed System Manger.  In keeping with previous posts, I know that the MSSQL server is running in the taskbar.  I've

  • Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10 and 55 error

    it is just a day with disaster. I bought Z77A-GD65 yesterday, and now it almost driver me crazy , i have two most famous problem of the board ,the CODE10 and ERROR 55!!! after i bought this board to home ,i spend few hour to figure out the reason why

  • GRC 10.0 - customizing

    Could someone describe how the customizing tool works in GRC 10.0 (with an special focus on GRC Risk Management).. Do I, as a customer, have to define a certain risk -for example relevant in the drug industry and implement it so the software can test

  • Putting a class of objects in a Linked List?

    Hi, I copied a program from a book and I want to edit it and put studentRecord class in the Linked List. I've tried to play about with datum, but everything I try doesn't work. Can someone help me out? How could I put studentRecord in the LinkedList?

  • How to send an email from api

    hi, when i click on one of the mail id mentioned on a html page, it should open an outlook window pane which allows you to send a mail. how can i do this..??