Ipod stopped working with iTrip

My iPod stopped working with my iTrip very mysteriously. I left it in the car for 2 hours (as I always do at work) and it worked when I left and wouldn't work when I went to drive home. I've replaced the iTrip and know that it works with another iPod (identical to mine and bought at the exact same time).
Does anyone know if there's way to fix this?

I just started having issues with my iPod as well. It is paired with my JVC receiver through an iPod adapter. I can normally control my iPod through the JVC once it is connected, but the last few days I have had to control it through the iPod itself. The screen on the receiver says connecting, but never does unless I do manually.( pressing play on the iPod). I can still see song titles, but no control. IE pause, next or previous songs. Nothing seems to work, and have treid powering both off then back on. Is this an update issue that wont let them pair anymore? I also tried a friends iphone and seemed to work fine with the JVC, so the receiver is not the issue.

Similar Messages

  • My iPod stopped working with the USB in my car but still works on it's own. Any suggestions?

    My iPod stopped working with the USB in my car but still works on it's own. Any suggestions?

    Read the car user manual and/or contact the car dealership.
     

  • Since last Saturday my 4gs stopped working with itrip and Revo K2

    My phone worked perfectly until last Saturday with both accessories . I have restored but still says IPhone does not support this accessory. My partners 4gs works fine with them - help please

    Have you tried turning your phones off for a few minutes?
    W computing devices, when they are acting funny, often turning them off for a few minutes & then back on again can fix a lot of things.  Apparently when they are doing things, sometimes little bits of electronic garbage can be left behind that over time can cause things to act funny. Removing power from the device can clear those things out of memory.
    Also try that w your mac, whether you are one who turns it off evey night, or one who never turns it off. & especially if you never or rarely turn it off, make it a point to do so every so often to clear out the electronic garbage, or whenever it acts strange, try that before more drastic steps.
    On the Mac, under Preferences, accounts, Imessages & you can be reache for messages at & it has my iPhone # 1st w a check box that is not checked & it is not grayed out. Then below it has my AppleID email listed & it is grayed out, just like my phone # is grayed out on my phone.
    Don't know if any of this would help. Today iMessages were having challenges for much of the day. I hadn't known a way to check system status but someone posted it elsewhere:
    http://www.apple.com/support/systemstatus/
    handy to know to be able to check if the system is having issues w anything to know whether it is the system or my own particular device having the issue.

  • Why has akai synthstation 25 stopped working with my iPod 4g

    Hello can any one help me.
    My ipod4th gen has stopped working with my akai synth station 25 it say this accessory does not support iPod touch.
    It always used to
    Thanks

    Oh, I'm glad it isn't just me having the problem. Hopefully it will be fixed soon.
    I am now able to get past the "Get Started" screen and see all of my messages as well. I still cannot send or get any messages either though.
    Thanks so much for your help

  • HT1386 I just reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  Help!

    reinstalled my windows operating system and decided to put on windows 8.  After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes.  My 1st gen ipod nano works with no problem.  I can eliminate any problems with the cable and connection.
    I've stopped and started the service, and also have performed cold reboots.
    Nothing seems to have helped the situation.
    Help!

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?
    The iPod Classic uses different drivers than the Nano

  • My iPhone 5 stopped working with my 2015 Subaru Outback after the iOS 8.1.3 update

    My iPhone 5 stopped working with the USB connector on my 2015 Subaru Outback. The phone will still charge, but the message is something like "this iPhone will not work with this accessory". Is there a fix being made? I saw others post with issues with the latest update. It worked fine with the prior iOS version 8.1.2

    Hello bballfan85,
    It sounds like your getting an error message that the iPhone isn't going to work with your Subaru all of a sudden over USB. I would use these troubleshooting steps from this article, named:
    If you need help with iPhone, iPad, or iPod touch accessories
    Update your software
    Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    These steps will help you troubleshoot the iPhone side of the equation.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • 5th Gen ipod stopped working , connected to Alpine CDA117

    Out of nowhere the ipod stopped working when hooked directly to the Alpine CDA117.
    It worked this morning when I pulled out of the driveway and drove to my shop . I did not unplug it when I arrived, it stayed in the car hooked up as it does often.
    When I got back in the car about 2 hours later it was not working . It recognizes the ipod , shows the song , playlist etc but no volume and it's not "playing" so it's sort of on "pause", but not showing that it really is "paused"
    Apple looked at it , thought there might be some dust on the contacts , cleaned it , tried it in the store and it worked fine both with earbuds and through speakers.
    It works in my wife's car via the same hookup.
    My wife's ipod works in my car hooked up just as mine would be .
    The guy at Best Buy who hooked it up , hooked his up and his worked fine.
    Firmware is up to date .
    I literally did nothing to it once I arrived and my shop and then got back in the car 2 hours later.
    Help me !
    I have a 3 hour ride up to the Berkshires on Saturday and will go bonkers without my music .
    Edit/Delete Message

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1655 I have a 3rd generation shuffle.  It has stopped working with the earphones it came w/pinch buttons on the cord.  It will no longer advance to next song/change the volume.  Even with a new set of Apple earbuds, it does same thing.  How do i factory

    I have a 3rd generation shuffle.  It has stopped working with the earphones it came w/pinch buttons on the cord.  It will no longer advance to next song/change the volume.  Even with a new set of Apple earbuds, it does same thing.  How do i factory reset or fix the problem?

    Hello there, RufusChloe.
    The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
    Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/shuffle3gen/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

    Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

    Natan turbo hadar,
    I have the same exact problem.
    I put an iPod shuffle on the Bose system, it plays just fine.
    My iPhone 4s works just fine connected to my car stereo.
    My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
    The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
    So it's not the Bose, it's not connections, it's the iOS 7.1.1
    Everything worked fine before, any one else have suggestions?

  • IPhone 4 stop working with ios 6.1

    iPhone 4 stopped working with ios 6.1, visited apple first time, restored phone and worked, less than 24 hours later stopped working again, back to the store, I told iPhone is out of warranty and they'll replace for $150. iPhone worked fine with previous version, no problem at all. Asked to restore to the previous software version, told can't be done. Why should I pay for a damage caused by a software update. Tec claims that ios 6.1 will not work with my phone because it discovered some hardware malfunction, possible the home button. They can't repair. suggested to go to a third party. I'm a satisfied Apple product user for many years. What happened? Any welp out there?

    Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
    Anyways after about 18h of search and stress I came across this link:
    http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
    That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
    Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
    When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
    Well hope that will work for you like it did for me

  • Will my ipod classic work with windows 8

    I am finally updating my Windows XP desktop to a Windows 8 laptop.  Will my ipod classic work with Windows 8?  I've seen a ton of problems from other users with regard to compatibility.

    Do yourself a big favor. Switch to Windows 7. (Or buy a Mac.)

  • Will ipod nano work with itunes and windows 8?

    I am having trouble putting audiobooks from itunes on my ipod nano.  I have the 7th generation ipod and windows 8.  I have managed to put music and a couple movies on it but no luck with the audio books.  Please help!  Thank you, Lori

    Yes.  All model iPods should work with the newest version of iTunes.
    B-rock

  • Will Ipod Touch work with Windows 8

    Will IPod Touch work with Windows 8?  Why is that not even a listed option in the help feature?

    Apple has just not got around to revising the documentation to reflect Win 8. Just use instructions for Win 7

  • Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?

    Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?

    No, they are different.  If you look at the replacement part for the 4th gen shuffle's USB cable
    http://store.apple.com/us/product/MC003ZM/A
    it says it's only for the 3rd and 4th gen shuffle.

  • Does ipod nano work with ipod photo dock, s-video out?

    Does the ipod nano work with the ipod photo dock, with an s-video out? Will apple make one for the nano specifically?

    The iPod nano cannot show photos on an external device, I suspect Apple have not built this feature into the hardware. The options for showing to a TV are not in the photo menus either.
    Ian

Maybe you are looking for

  • Can't sync Outlook 2010 calendar using DM 6

    Hi, This is my first time on the forum. I have searched for similar issues and tried some suggestions, but am still having issues. I get "BlackBerry Desktop Software has encountered a problem and needs to close" error message trying to sync to Outloo

  • Is any report available to find the PO against network or WBS

    Hi Experts, Shall we have th report for Purchase orders or sales orders  against network or WBS in standard. Thanks in Advance. Regards, Madan.

  • Parsing error:Element "process" must have no character [children]

    hi, Please does any1 know how to fix this error ? when deploying the poroject i got : XML parsing failed because Element "process" must have no character [children], because the types content type is element-only......" when double clicking on the ab

  • 1180: Call to a possibly undefined method addChild.

    Hi - I get the folowing error in one of my classes and not too sure why? Would appreciate some enlightenment package  {     import flash.display.Loader;     import flash.net.URLRequest;     import flash.events.*;     import flash.display.*;     //imp

  • SAP Logo/Title Bar (SAP GUI for HTML)

    Hello all, Anyone know how to disable the SAP logo/title bar that appears via an SAP GUI for HTML transaction (ie. PZ56)?  I'm trying to get the transaction to show in the Portal using the SAP Transaction iView, but it displays this SAP title bar wit