IPod stops when im half way through uploading my songs

Please help i get through about 100 songs then it just stops i have a 4G 20 Giger. I have tryed everything my problem is like this Ben Vallack1, "iPod stalls when uploading songs, every time", 03:27pm Jul 19, 2005 CDT
please help me .

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete  the podcasts and resync/redownload
- Restore from backup. See:                                                
iOS: How to back up                                                                                     
- Restore to factory settings/new iOS device.             

Similar Messages

  • Can't hear long notes when played half way through

    This is probably a common problem/question.
    I often have very long sections with a single continuous chord (in this instance ‘dynamic swell’ ‘extra cello sect legato’ and ‘tonewheel organ’)
    My problem is that to check edits on small sections of a composition I have to go right back each time to where the aforementioned chord begins in order for it to be heard. if I put the playhead half way along the chord it doesn’t play. Is there a way that the playhead can pick up on notes half way through?  I’m sure this has been dealt with dozens of times on this forum but I could only find one post from 2010 that I couldn't apply to Pro-x.   Thanks!

    In LPX you need to turn on the Chase functionality
    This is done by going to the Project Settings menu (Not Logic's General prefs)
    LPX Menu Bar > File > Project Settings > Midi > Chase tab
    I have mine set up as thus...
    You may not need to or wish to turn on everything I have selected.. Play around and see what works best for you and your own method of working in Logic.
    The specific function for playing sustained notes half way through is the first option (Notes and Sustained)
    Note: This is a per Project setting and so only applies to that project and not any others.
    Therefore...
    I suggest you create a new project, set up chase and then save this blank project out as a template you will then choose and open each time you create a new project from now on...  You new chase settings (alone with any other settings you wish to use in every new project) will then be setup of each new project you create. For any older projects you need this functionality in... you will have to set up chase for each one and then save.

  • Why does a song stop playing music half way through the song and the remain part of the song is silent?  It is not ever song either just mainly the ones downloaded from iTunes?

    I have the last upgrade and when I listen on my computer they are complete, but when I put it on suffle only half of the song plays.

    Try working through the 5 R's of troubleshooting to rule out the possibility of a software glitch or corrupted data.
    http://www.apple.com/support/ipod/five_rs/
    Do this happen with tracks at random or only a certain subset of tracks?
    B-rock

  • My flash player freezes when im half way through playing a game

    hi
    i have a small issue with my flash player. when i load a game on facebook it let
    s me play so much of the gamebut when i try to go to another level it fre
    ezes but it doesnt freeze my whole internet explorer just the game. i have conta
    cted facebook and there look into it and said its some sort of problem with f/p and i
    dont have any idea how to sort it
    thanks

    Do you know what format the videos are, did you convert the videos or just copied them?
    I recommend you first try just sending them over BT or through USB (through a PC)
    DON'T use PC suite as this may convert the videos and that may be causing the problem.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • HT1212 i just tried to restore a ipod and it got half way through and is now stuck on restore screen???

    i just tried to restore my ipod touch and its stuck on restore screen??

    What exactly happens?
    What does the status bar in iTunes say?

  • Why does the blue bar when you're downloading go back to the start half way through?

    When downloading half way through it restarts downloading I have waited over an hour and a half and still hasn't finished downloading, I have also tried restarting the iPad. Can someone please help me.

    If you are trying to download via 3G there is a 20MB limit I think. You can download to iTunes on your computer and then sync to transfer the app. I don't have a 3G iPad but you may be able to download directly on the iPad with WiFi instead of 3G.

  • My ipod stops half way through step 1 when I am syncing

    I[od touch stops half way through step q which i backing up

    I would try moving the existing backup to a safe place since there may be some corruption that is causing the problem.  The backup file is located hre:
    The folder where your backup data is stored changes depending on the computer's operating system. Since iTunes only keeps one backup per device, you should ensure the backup folder is included in your periodic data backup routine.
    iTunes places the backup files in the following places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP,  Windows Vista and Windows 7).

  • Track purchased from iTunes stops half way through & Jumps to the next track on both computer & iPod

    Purchased album from iTunes. One track stops half way through & jumps to the next track on both computer & iPod.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • When I turn my iPod. 16GB Apple iTouch Black 4th Generation - ME178BT/A off half way through a track, why doesn't it resume when I turn it back on from where I left it????

    I have just recently been bought an ipod touch 4th gen 16gb as a gift, I have uploaded all my music on to it and have been using it but every time I turn it off when half way through a track when I turn it back on to carry on listening to the track where i'd left it it doesn't resume play!!!
    Can somebody please tell me why this is the case? as this is very annoying!!!!!
    Thank you for your time and cooperation.
    Kind regards
    Jamie

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • C3135 All-In One: When I turn it on, it feeds 1 sheet of paper half-way through and then stops.

    C3135 All-In One: When I turn it on, it feeds 1 sheet of paper half-way through and then stops.
    Even does this when not connected to the PC. I have tried a reset.

    I don't know of one place JUST for this. I usually step people thru it on the WIndows forums so 1) they don't fudge up things even more and 2) sometimes windows wants to be a pain and stuff. But You can go here and roll down to "Format in windows" http://discussions.apple.com/thread.jspa?threadID=361771
    There are cases where even in disk mode it will not show, or only show for a second in windows under "My Computer". And in these cases you have to open task manager (Hold altctrldel all together to open it) goto the "Process tab", highlight "iPOdservice.exe" and hit end process. If you have to do this, you will have to restart windows when its done formatting so the "ipodservice.exe" is started again in the background and you can use the ipod updater to restore it

  • I recieved a notice that there was an update for Elements 13 but when I try to install it it stop's half way through then I get the error message that "updates could not be applied" I have tried several times and it continues to give me the error. What is

    I get a message that an update is available and when I install it the update stops half way through and I get the error code: U44M1I210 for Camera Raw and Elements 13.1 updates. I get the message "UPDATES COULD NOT BE APPLIED" Can someone help with this? Thank you. David

    drmeyers381
    Thanks for the follow up.
    Is your Premiere Elements 13 on Mac computer?
    I have not seen much in the way of alternatives coming from Adobe on the Premiere Elements 13.1 failed updates.
    But there seems to be several discussions on U44M11210 in the CC products...one
    Update failure. (U44M1I210) | Adobe Community
    You could try the uninstall, free ccleaner, reinstall with antivirus and firewall(s)  and then try for the Help Menu/Update for 13.1..
    If Mac, https://www.piriform.com/mac/ccleaner
    If Windows, CCleaner - PC Optimization and Cleaning - Free Download
    The CC people seem to have the advantage of an online download of their update as well as the one via the Help Menu/Update.
    Premiere Elements does not have that perk - update only via Help Menu/Update.
    Please review and consider and please let us know of your progress as your schedule permits.
    Thank you.
    ATR

  • My 80 gig ipod color stops updating half way through

    My ipod 80 gig color stops updating half way through the synch process. I have tried to restore it and it still fails and gives me an error message saying it cannot read or wrtie to the ipod after it is half way loaded after trying to load 5000+ songs only it gets to about 2,250 and stops.

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    If necessary, post the resultings numbers and we can verify what the next steps to take.
    B-rock

  • IPOD CLASSIC STOPS SYNCING HALF WAY THROUGH

    my ipod classing stops syncing half way through and says could not be synced can anyone help me please?

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    If necessary, post the resultings numbers and we can verify what the next steps to take.
    B-rock

  • When trying to download the latest itunes it stops half way through and says "error occured whilst installing the update

    when trying to download the latest itunes it stops half way through and says "error occured whilst installing the update"
    anybody know how to fix this?

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I hired a movie and half way through it stopped loading so i exited the movie and it vanished, when i clicked on the movie again it asked if i wanted to rent it???

    i rented a movie from the apple store off my apple TV half way through the movie it stopped like it was waiting for it start loading. i then exited the movie and went to click on it again but found that the movie was no longer there and when i clicked on the same movie it asked it i wanted to rent it, which i had just done. i would just like to know what happened here and how to fix this?

    This has happened to me 3 consecutive times!!
    3 movies. 3 mysterious stopages in mid movie with no fix.
    If only they solved their own problems as quickly as the scoffed your money!
    I have no idea how to report it.
    Apple only wants to communicate with you when you want to purchase products but makes it brutaly painfull to solve problems.
    They have become a pathetic, gready symbol of sloppy excess.
    They WIIL fail because they forgot how deliver their products.
    I was a lifelong apple user and that is over for good!
    I've been ripped off by them for the last time!
    There's too much competant competition out there now.

Maybe you are looking for

  • Referencing _root.Button  from a movie loaded inside another movie

    I have the following situation MainMove.swf is doing a loadmovie of SecondMovie.swf The Button that loads SecondMovie.swf also disables other buttons in MainMovie.swf on (release) {     _root.intro_btn.enabled = flase;     loadMovieNum("SecondMovie.s

  • Oracle patch updates

    i need to set the following url in my em for database 10.2.0.3.0 and Oracle Enterprise Manager Database Control 10.2.0.3 the problem comes that i cannot access the following url and not even directly. http://patches.oracle.com can it happen? i have c

  • Lightroom 3 Undo Levels and Undo "Locality"

    How many "undo" levels are tracked in a Lightroom 3 session? I know that all edits can be "undone" in the develop module using the history.  But when I hit "Ctrl-z" a bunch of times, it does undo a bunch of actions, but it does seem to stop before un

  • Failed update retriever download: 2325-2UU

    Update retriever failed to download another driver ThinkPad Power Manager - Vista/7 [32,64] v6.36.0.0  PWRMGR_VISTA

  • Enhancement request - ADF BC convert EO based VO to read-only VO

    Hi Can't see if we can do the following in 11g (or 10.1.3); is it possible? Otherwise would be a nice to have. If at design time I mistakenly create an ADF BC VO as one that is based on an EO (ie. updateable VO), but it would be better suited to a re