IPod stuck in "recovery mode" upon update to 1.0.3

Hi. Downloaded the 1.0.3 update just 3 days ago. When the installation was finished, I got a message sayng I had to recover to use the iPod with iTunes. And so I did. Apparently something went wrong during the update, hence the message. Now all I see is the "do not disconnect". When I disconnect it anyway, it says "Ok, to disconnect", and when I reconnect it, the disconnect message reappers. No matter how many times I recover, the same message keeps popping up. Reseting the iPod does not work either.
So far, so good. There are guides to solve this. Now, the problem now is that when I use the guide on how to reassign drive letters to the iPod, it doesn't show up when I go to Disk Management, which means I cannot reassign any letter. I should note that I can't access it as an HD from My Computer, I'm only given a message that says "Insert a disk in station K:" In addition, Windows seem to be unable to identify any specs of the iPod, such as size etc.
So it seems like the update messed up my iPod. I have no clue on what to do.

Hi there try restoring ur ifone using a different PC.
i did face similar problem using my old ifone4. and no sooner did i try recovering using my office laptop.. it did work fine
try it out

Similar Messages

  • Help, My ipod stuck in recovery mode after update!

    HI
    Updated mt ipod touch to 4.0, evrything was goimg well then a got message to install device driver, windows cant find driver and my ipod is stuck in recovery mode! itunes doesnt detect it either (reinstalled itunes and upto date)
    Help im stuck!!!
    posted a screen shot to so you can see what messages im getting.
    http://i69.photobucket.com/albums/i72/DeniseAngel27/sims/ipod.jpg

    Hi
    the first link did the trick. itunes now recognises my ipod but as it is restoring i get a error that says "ipod could not be restored. An unknown error occurred (21)"
    so it wont restore now! I copyed the error report, here's what it says.
    2010-06-29 22:44:33.485 [4120:810]: restore library built Jun 8 2010 at 18:17:31
    2010-06-29 22:44:33.486 [4120:810]: iTunes: iTunes 9.2.0.61
    2010-06-29 22:44:33.486 [4120:810]: iTunes: Software payload version: 8A293
    2010-06-29 22:44:33.564 [4120:1314]: iTunes: Specifying UOI boot image
    2010-06-29 22:44:33.565 [4120:1314]: requested restore behavior: Erase
    2010-06-29 22:44:33.579 [4120:1314]: amai: AMAuthInstallPlatformCreateDataFromFileURL: can't resolve file
    2010-06-29 22:44:35.369 [4120:1314]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 0.6.31-b2)
    2010-06-29 22:44:36.025 [4120:1254]: iBoot build-version = iBoot-889.24
    2010-06-29 22:44:36.026 [4120:1254]: iBoot build-style = RELEASE
    2010-06-29 22:44:36.027 [4120:1254]: AMDeviceIoControl: GetOverlappedResult failed
    2010-06-29 22:44:36.027 [4120:1254]: AMDeviceIoControl: pipe stall
    2010-06-29 22:44:36.027 [4120:1254]: USBControlTransfer: error 31, usbd status c0000004
    2010-06-29 22:44:36.027 [4120:1254]: command device request for 'getenv radio-error' failed: 2008
    2010-06-29 22:44:36.027 [4120:1254]: radio-error not set
    2010-06-29 22:44:36.029 [4120:1254]: unable to open device_map.txt: No such file or directory
    2010-06-29 22:44:36.030 [4120:1254]: <Recovery Mode Device 07B08260>: production fused device
    2010-06-29 22:44:36.031 [4120:1254]: interface has 1 endpoints, file pipe = 1
    2010-06-29 22:44:36.031 [4120:1254]: <Recovery Mode Device 07B08260>: operation 4 progress -1
    2010-06-29 22:44:36.111 [4120:1254]: <Recovery Mode Device 07B08260>: operation 42 progress -1
    2010-06-29 22:44:37.150 [4120:1254]: <Recovery Mode Device 07B08260>: operation 5 progress -1
    2010-06-29 22:44:37.836 [4120:1254]: AMDeviceIoControl: GetOverlappedResult failed
    2010-06-29 22:44:37.836 [4120:1254]: AMDeviceIoControl: pipe stall
    2010-06-29 22:44:37.836 [4120:1254]: USBControlTransfer: error 31, usbd status c0000004
    2010-06-29 22:44:37.836 [4120:1254]: command device request for 'getenv ramdisk-delay' failed: 2008
    2010-06-29 22:44:38.434 [4120:1254]: AMDeviceIoControl: GetOverlappedResult failed
    2010-06-29 22:44:38.434 [4120:1254]: AMDeviceIoControl: pipe stall
    2010-06-29 22:44:38.435 [4120:1254]: USBControlTransfer: error 31, usbd status c0000004
    2010-06-29 22:44:38.435 [4120:1254]: command device request for 'ramdisk' failed: 2008
    2010-06-29 22:44:38.435 [4120:1254]: AMRAuthInstallDeletePersonalizedBundle
    2010-06-29 22:44:38.506 [4120:1254]: removed personalized bundle
    2010-06-29 22:44:38.506 [4120:1254]: <Recovery Mode Device 07B08260>: Recovery mode failed (result = 21)
    2010-06-29 22:44:38.546 [4120:810]: iTunes: Restore error 21
    Message was edited by: deniseangel27
    Message was edited by: deniseangel27

  • TS1363 4th gen IPOD stuck in recovery mode?

    4th Gen IPod stuck in recovery mode, how do I reset or restore?

    Connect it to iTunes.  If iTunes doesn't see the iPod, try manually connecting the device to iTunes in recovery mode using the instructions in this Apple support document.
    iOS: Unable to update or restore
    B-rock

  • HT4623 Stuck in recovery mode after update. What do I do?

    Stuck in recovery mode after update. What do I do? Tried holding both buttons and releasing after screen goes black. Returns to recovery screen.

    Hi there Rosie Bud,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    https://support.apple.com/kb/ht1808
    -Griff W. 

  • My phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    my phone got stuck in recovery mode after update to IOS 5.0.1, how can I solve it ?

    Read this
    http://pathumf.blogspot.com/2011/11/how-to-reboot-stuck-iphone-iphone-4s.html

  • My iPhone 4S is stuck in recovery mode during Update to 5.0.1

    As above, my iPhone 4S is stuck in recovery mode during Update to 5.0.1
    The itunes software just keeps cycling and trying to restore then restore failed, iPhone is stuck with the sync to iTunes symbols, and I don;t seem to be able to get it out of recovery mode.
    Almost wish Ihad my old HTC back ..
    Any one any ideas please?

    Hi there try restoring ur ifone using a different PC.
    i did face similar problem using my old ifone4. and no sooner did i try recovering using my office laptop.. it did work fine
    try it out

  • Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1

    Hi Everyone,
    my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
    Ive tried all that I can including the tips given in the apple forums and internet. Please help.

    Hello soccerlime,
    Thanks for using Apple Support Communities.
    The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked.  Please take a look at the information below to help resolve this error.
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

  • My iphone 3gs is stuck at recovery mode while updating software 4.3.3

    my iphone 3gs is stuck at recovery mode while updating software 4.3.3 and even itunes is not responding . and i m using newest software of itunes on mac. please help.

    If you followed all of the steps within that article then it's almost always a hardware issue. Reason being is that if you attempted restoring the iPhone from another computer (as the article informs you to), and you are still stuck in recovery mode, it proves that it is not a problem with the iTunes installation on your computer.
    - Greg

  • Ipod stuck in recovery mode and wont restore

    ipod stuck in recovery mode and wont restore.Also not reconized in itunes anylonger.When I check my usb in device manager says in recovery mode!
    Using PC with windows 7 64bit! Tried DFU mode but it boots back showing a usb,plus an itunes icon on the screen!

    - Reboot the computer
    - Try another USB port and cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Ipod touch stuck in recovery mode after update

    Help!  Ipod touch is stuck in recovery mode after an update.  I don't want to restore and lose all pictures.

    You have no other choice but to restore. You can restore from backup and get the iPod back to where it was when the backup was made.

  • IPhone 3GS stuck in recovery mode while updating to iOS 6.1

    Hello there, I was updating my iPhone 3GS(New Bootrom) from iOS6.0 to iOS 6.1. While it was updating, iTunes suddenly ends up saying error and now my iPhone is stuck in recovery mode loop. I've tried DFU mode on my iPhone and try to kick it out by using TinyUmbrella but the computer doesn't reconize it. And when it was on recovery, iTunes doesn't reconize too, a window pops up and says i have to install 'Apple Mobile Device'. I've re-install and install iTunes a couple of times and nothing is working. Switching on and off the iPhone doesn't work too. Please, someone help me with this problem! I really do not know what to do! Please reply this As Soon As Possible!

    Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
    Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
    The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
    The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
    Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
    I had another problem and that was...
    Error 1603 and 1604 : These are USB driver connectivity problems.
    Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
    Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

  • [Zen Xtra] Stuck in Recovery Mode after updating Hard Dr

    This is a long post, but I thank you in advance if you read it and think you have any ideas for me. Parts of this post were originally posted on the Nomadness.net forums and parts of it come from my personal email correspondence with one of the experienced users on that site.
    Here goes:
    I just installed a new HD on my Jukebox, and now I am unable to get it to download the Firmware (current or otherwise) and it remains in a state of rescue mode.
    Here is how I posted my dilemma on the nomadness.net forums:
    My computer is running Windows XP. I have a Nomad Jukebox Zen Xtra 40GB that I have had for about 2 years, and have had no problems with it, using it at least 8 hours/day 5 days/week (I run it at my desk while I work). I mention that just to give you an idea of how much regular continuous use it has been getting, if that matters. I have regularly downloaded all the latest appropriate firmware, etc. from the Creative website, using the auto updater service. I have one other Creative product connected to this computer, a SoundBlaster Audigy. This will come up again in a minute.
    Over time I have accumulated so much new music that I knew I had to either get a new Jukebox or upgrade the HD. Since the Xtra is no longer available new, and upgraded ones are SO expensi've on eBay, I thought I would install a new HD myself. I read the instructions posted here on nomadness.net, and purchased an 80 GB 5400 RPM Momentus 5400.3 Ultra ATA/00 Internal Hard Dri've (that's Seagate).
    Ok, now. The installation went easily enough, but now I cannot get the Firmware to reload. My computer recognizes that the unit is connected - it makes the appropriate sound when I connect or disconnect the JB, and under My Computer, there is the icon for the Nomad Jukebox Zen Xtra, under the "Other" category.
    When I installed the HD and powered up, I got the rescue menu as expected and started with the "FORMAT ALL". I got the confirmation that it was reformatted and the expected GB of memory showed as available. SO...then I went to "RELOAD OS" and selected the "yes" option to verify that I wanted to reload via USB --BUT-- it only showed the "Start Firmware Update Now" for a second and then went right back to the menu. I have tried using the reset, and every combination of unplugging, replugging, removing the battery, putting it back in, reformatting, etc. and nothing changes. It just goes right back to the rescue menu every time.
    I have the Firmware files (old and new) saved on my computer's HD, but when I try to launch any one of them, I get the same annoying message: "Your player is not connected, please connect your player". Well, if the computer thinks it's connected, then why doesn't the firmware file? I don't get it.
    If I go back to the Creative auto updater on the website, it still recognizes the SB Audigy being connected, but no longer recognizes the JB.
    How can I get the Firmware into the JB if I can't get it to recognize the player being connected? And why is that my computer shows it, if the Firmware file itself doesn't see it's
    I received only one response that suggested I check the instructions on the Nomadness FAQs and also the great upgrade guide by Mr. Cheow, also on Nomadness.net.
    This was my follow-up post:
    Since I posted this earlier today, I have tried everything, and I mean everything, suggested by all of these "guides" to upgrading a hard dri've.
    The problem remains that my computer recognizes the Jukebox as a portable device that is connected, but I am unable to get the Firmware file to load because it always says that my device is not connected. It should also be noted that the Nomad Explorer and other applications also will not recognize it (Notmad, JBHTTP, etc.)
    Furthermore, I will add that we have two of the exact same model Jukeboxes and two of the same Dell computers running XP, etc. and in every possible combination we have tried, my Jukebox, with the new HD is the one that can not be accessed. So, I know that the connections, drivers, ports, etc. are not defecti've. The only thing that has changed since this morning is that I installed the new HD in my Jukebox.
    I would love for any of you who have done this kind of upgrade to offer suggestions, as I am willing to try anything at this point.
    After my last post, as a last ditch effort, my boyfriend suggested swapping the hard dri'ves in my Jukebox and his, thinking that perhaps we could get the firmware to download into his, and then switch the hard dri'ves back. Well, it looked as though it was going to work, and then the firmware update stopped almost as soon as it started and so, we are back to the same impasse. It?s the strangest thing, considering that both of us have been using our respecti've JBs daily, and have had no other problems? until I tried this.
    We both racked our brains trying to think of a way we could get the firmware from the computer into the jukebox since it won?t load as long as it doesn?t recognize the player. Is there any workaround for this? By that I mean, is there any way at all to get the firmware into the Jukebox with out just launching it as a self-executing file? I know you can't just ?put? the file into the Jukebox, but is there any other means to extract it into the Jukebox so that I can use it's?
    Any help you can offer would be most appreciated. I am worried that I have ruined my Jukebox and wasted $75 on a HD that I can never use?.
    ***Note on the Hard Dri've I chose:
    I specifically chose this HD based on information posted by others on Nomadness
    In particular, the newer instructions for upgrading a Zen Xtra hard dri've that were posted by an individual who used a 5400 for his own upgrade. I even emailed him with questions before I went ahead with this HD. As someone who has done this before, he felt that since this HD fits the specs of size and type being used by others doing this type of upgrade, including his own, that it would be fine. I honestly don?t think that it is the HD itself.
    Since trying the swapping of HDs and Jukeboxes last night, we now have not one, but two, that are stuck in recovery mode and flash ?Firmware Problem? when rebooted. I don?t see how the HD itself could have done this. In fact, I am certain that the HD did not ?cause? the problem.
    I have been reading forums about Jukeboxes (including here), anything I can find, looking for possible solutions. I have discovered that there are many people out there with the same dilemma, even those who simply updated their Firmware and nothing else, but now are stuck in the same frustrating place that I am.
    ***Note on the versions of the Firmware Update files I have tried:
    I was going to use the newest one, but then after reading comments on Nomadness, I decided to try the older version that everyone was saying was less problematic. (see below) One of the posters had provided a link to it, and I copied it from there. I also had two other newer versions of the Firmware Update, including the newest one that has supposedly caused all the problems for others, but none of them would launch anyway ? I just kept getting that same message saying that the ?player is not connected?. Actually, to be more accurate, as I think I described in my original post on Nomadness, when I first tried to upload the firmware, it seemed as though it was going to go through with it, but never got further than one segment on the file progress display. On the screen of the player, it said it was upgrading, but after a few hours, it had gone nowhere.
    Oldest - ZenXtra_PCFW__03_02_L6
    New-ish - ZenXtra_PCFW_LA__20_08
    Newest - ZenXtraP4SAudible_PCFW_LB_2_0_03
    If you have read this far, then please know that I appreciate it very much. If you have any further ideas or suggestions, please reply.

    Amazing that someone noticed this post and took a stab at it after over a year... Actually, I found my answer long ago, and have tried to go back and post?it'son several boards where I had been looking for the answer. It seems to be such a common problem that I figure someone else can surely use this solution as I did. I would suggest that anyone?who is experiencing the frustration of not?getting their computer to recognize their device?read the very enlightening and helpful page that I am linking to here:
    http://www.misticri'ver.net/forums/showthread.php?t=30939? (this is from a forum for iRi'ver, but the info and fix are uni'versal)
    This simple solution involves correcting the ENUM keys in the Registry (not as scary as you might think) and deleting all instances of your player from the Device Manager and then reinstalling so that Windows and other applications will all recognize your player again. It's so simple, and once I tried it, I was amazed that's all it took to fix the problem.
    ?I?suggest you read the whole page and follow the instructions as they are given. I deleted and re-installed my player several times and then rebooted a couple of times before it took effect, but then it did, and I was able to download the Firmware and have had continued success with my original player that I posted about as well as others I have acquired since I first posted that message in 2006. For reasons I have not yet identified, this problem still happens every now and again, sometimes when I switch between players to synchronize. It may well be that when I use my registry cleaner or some other utility that "fixes" my registry, that it resets this particular key - but as long as it's easy to fix, it's not a problem. Hope this helps others who may stumble upon this odd little problem with the Zen Xtra.Message Edited by TrixieInDixie on -05-200709:28 PM

  • Ipod stuck in recovery mode and won't restore. says it can't connect to the network.

    My son tried to jailbreak his ipod touch like an idiot and of course it did not work. Now his ipod is stuck in recovery mode and I can't get it to restore. I get a message that says:the ipod software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later. I have internet access and everything is working but itunes can't connect to it. Why? I have been having issues with itunes for a couple weeks now. I can't connect to the store and redeem itunes cards either.

    Make sure the setting for your security software allow iTunes to contact Apple servers:
    iTunes for Windows: Troubleshooting security software issues
    As for the iPod, since he tried to modify the software, the only thing that could help would be DFU mode , we can't help much more, problems with jailbroken devices can't be discussed in theses forums, due to the Terms of Use.
    Your son has to ask those people for help, which encouraged him to jailbreak his device.

  • Iphone 5s Stuck in recovery mode when updating to 7.1.1

    I was trying to update to the latest verson of iOS7 tonight my phone got stuck in Recovery Mode. Now even when I try to recover it from iTunes it gives me an error. Please help

    Download tinyumbrella and click on "exit recovery mode".
    It worked for my iPad mini and iPod 5th gen.

  • HT201413 Ipod stuck on Recovery Mode

    My ipod is stuck on recovery mode, whenever I go on itunes to restore it, my ipod's screen goes blank and is unable to restore it. A message also pops up on itunes stating that itunes is unable to restore the ipod error (40). I have tried the application Reboot yet it is still stuck on recovery mode.
    Please tell me what should I do.

    Hi there Sammy1009,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    -Griff W. 

Maybe you are looking for