IPod stuck on Accessorize Test

Can anyone help me with this issue? This morning, I touched my iPod and the ipod went into Accessorize Test and I cannot turn the iPod off or reset the iPod.

Hello jawss,
And welcome to Apple Discussions!
This morning, I touched my iPod and the ipod went into Accessorize Test
How in the world did that happen?
Anyways, by resetting the iPod, do you mean you are pressing and holding the Center and Menu buttons together until the Apple logo appears? Have you made sure the hold switch wasn't activated as well?
If you are unable to get any sort of response from your iPod, try letting the battery completely drain. Then hook it up to your computer and charge, and once it has enough juice for iTunes to pick it up, go ahead and Restore it there.
B-rock

Similar Messages

  • Stuck in accessorize test

    Please Help, i am stuck in accessorize test and my Ipod classic 160g  won't do anything.  It won't turn on / off simply nothing. I am using Vista.  As everyone, i am Totally lost with-out my Ipod.  Please can someone help??   Many thanks

    Thanks for all the looks, i have now found the answer and all is fixed   I am sooooo happy again.  xx

  • My iPod is stuck in ACCESSORIZE TEST Mode help pleaseeeeeeee

    I went to reun diagnostics, unclicked the first 2 and this was the result
    Re: iTunes wont sync my iPod Classic 80 GB
    Posted: Mar 27, 2010 10:02 AM in response to: b noir Reply Email
    could you please respond to [email protected] also in that i read that Email daily? PLEASE?
    Thank you so much
    this is what tghe test results were. can you please help? it is frozen on
    ACCESSORIZE TEST
    please plug fw
    LCD ID : 2
    FWPWR : 0
    i did the run diag. nest next next next this is what it said
    also redid run diag again did next and next only twice. in brackets it is what it said
    red dot only on {iTunes helper is not working }
    and the 2nd bunch was green except for the red dot on...no iPod or iPhone found}
    Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
    Gateway T5062
    iTunes 8.2.1.6
    QuickTime 7.6.4
    FairPlay 1.4.10
    iPod Updater Library 8.1d19
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 77A954A4AC937069
    Current user is not an administrator.
    The current local date and time is 2010-03-27 12:55:08.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA, NVIDIA GeForce 6150SE nForce 430
    External Plug-ins Information **
    No external plug-ins installed.
    iPod/iPhone Connectivity Tests **
    iPodService 8.2.1.6 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller. Device is working properly.
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    Serial Number: 8K6182HZSZA
    iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    pc win vista

    have you tried restarting the iPod? hit menu and the center button together until the screen turns off.

  • My screen is stuck on Accessorize test

    Accessorize Test
    Please plug FW
    LCD  ID   : 4
    FWPWR  : 0
    Screen is stuck

    Reset the iPod - Press Menu and Center button for about 10 secs till the Apple logo comes ON then release the buttons.
    Have a nice day.

  • Stuck on accessorize test menu

    some how i pressed a series of buttons on my ipod and got an accessorize test menu...tried the five r with no results. Can someone help?

    No worries Chris Thanks though!
    I was just wondering what they were trying before!
    The discussions are getting there
    btabz

  • My ipod 30GB reads---Accessorize test :( PLAESE HELP!!!!!!

    PLEASE HELP ME! My ipodGB reads "accessorize test". below that it says "please plug FW, LCD ID:1, FWPWR:0" what do i do? i can not use it, or plug it into my computer...but the backlight stays on. i have tried to reset it many times. i also do not want to be charged to fix it . plaese help me, im lost without my ipod!

    Interesting, the link you were given has a similar test within it but to get to it you have to reset and then when the apple logo appears hold down the centre and the rev buttons. When you do that the apple logo reverses and you get a list of tests as shown in the link you were given. I'm guessing you haven't done that?
    I haven't ever seen a diagnostic test come up on screen without going into diagnostic mode but perhaps there is some simple test built in just to test accessories.
    Usually with the other tests you just do whatever is asked and you get a pass or fail. You can usually exit by doing a reset where necessary or sometimes by pushing the menu button but you've probably tried that.
    The other option is to do what it asks and see if you can exit by going through them.
    "Please plug FW" means plug in a firewire cable, connected to something probably, so if you have one, plug it in.
    LCD ID:1 simply means your screen is connected.
    FWPWR:0 means that your ipod is not drawing power via a firewire connection.
    If you plug in your firewire cable it should change to a 0.
    It is possible that will be the end of it or alternatively you will get another screen asking you to plug in your usb cable and possibly your head phones and a remote.
    Hopefully the remote test will be optional because you may not have one!
    In these kind of tests a 0 means no or not present and a 1 means yes or working ok or connected.
    Having written all this, probably the quickest way to find out how to stop it is to call Apple!
    If you get a test for the click wheel you will need to scroll it around and around several times until it says pass or possibly in both directions.
    You may get a "key test" which means just push all the buttons.
    Good luck and interested to hear what happens.
    John

  • Stuck on       Accessorize Test   PLEASE HELP

    Please plug usb
    LCD ID : 1
    FWPWR : 1
    USBPWR : 0
    DUE TO ITALY TOMORROW... AND NEED MY POD BAD!!!!!!!!!!
    THANK YOU ANYBODY!!!!!!!
    NYC LOVES IPODS

    Hi BellaVespaLady,
    from your post I can see you were running the diagnostic mode of the iPod, the FireWire cable was plugled.
    Simply reset the iPod holding 'Menu' + 'Action' key for for over 6 seconds.
    It should return to normal.
    I hope it helps.

  • My daughter Ipod is looked..................   accessorize test

    Her Ipod is locked......................... with an accessorize test. I pluged it into the computer NOTHING
    Tried to do an update........ computer does not even know the I-pod is there. HELP HELP

    Just popping in.
    I was having same problem on my Ipod 30 gig color. Stuck in accessorize testing. Held center button and menu and restarted thanks for the tip. I was getting worried. I use my ipod as a portable harddrive for work.
    Thanks

  • Got Stuck in FW Test...!!! Help Me Please...!!

    My IPod Classic 120gb got stuck on "Accessorize Test" please plug FW. LCD ID : 2, FWPWR: 0. I have no idea what to do. When I go to itunes it doesn't recognize that my ipod is pluged in. HELP PLEASE!!!!

    Hello there rajamanickam7,
    Thank you for using Apple Support Communities!
    I feel that a reset is in order at this point. That should essentially reboot your device and get it going again.
    To reset your iPod:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    Tip:
    If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
    From: iPod classic Troubleshooting Assistant
              http://www.apple.com/support/ipod/five_rs/classic/#
    Regards,
    Sterling

  • Why is my ipod running diagnostics/sccessorize test when i didn't tell it

    why is my ipod running diagonistics and now stuck on accessorize test screen when i didn't ask for it to run it and how short of resetting and having to start over to get it to stop ? thank you, melissa

    Resetting the iPod won't cause you to lose any data.
    To reset, press and hold the MENU and SELECT (center) buttons until you see the Apple logo. This is how you exit diagnostics mode.
    Cheers!
    -Bryan

  • Stuck in Diagnostic Test/Accessorize Test

    I turned on my iPod video today and I received the "Diagnostic Test" screen. I didn't know how to take it off that screen. I looked around and I clicked on Accessorize Test. Now I'm permanently stuck on that screen. It will not turn off, reset or connect to my computer when I plug it in. The backlight will also not turn off. Help? This is what the screen looks like.

    After numerous times of trying the "4 R's" (see tech support) it finally reset and is now working normally. I had it plugged in to the computer using the USB cable for about and hour and must have tried the reset at least 20 times when it finally worked. Yeah!

  • My ipod Says "accessorize test"

    Well I turned on my ipod and it went throught alot of wierd this about testing this testing that and now it say
    Accessorize test
    Pleas plug FW
    LCD ID: 2
    FWPWR: 0
    what does this mean
    and how do i fix it?

    It looks like the iPod diagnostic mode.
    You should be able to reset the iPod to exit that mode.
    See this.
    How to reset the iPod.

  • Need Help With Accessorize Test

    My ipod is completely stuck on the accessorize test. The 5 R's thing doesn't work and I can't go to any other screen or turn it off. The screen says " Please plug FW ". I don't even know what "FW" is.

    I am also frozen. Won't turn off stuck in a accessorize test mode, not even sure how I got here. Any help would be greatley appreciated.
    Cori

  • Frozen on Accessorize Test

    I have a 30GB iPod Video that I got for Mother's Day 2006. This morning my daughter went to use it and it was going through some type of diagnostics. Now it's stuck on a screen titled Accessorize Test. It's frozen solid. Can anyone help with this? Thank you.
    iPod Video 30GB    

    Did you get into that diagnostic screen on accident or were you trying to get there?
    It goes into the diagnostic screen, if you are resetting the ipod and then hit center+rewind.
    Most times this is done on accident, I would advise not running any of the tests as some can take up to 2 hours to complete.
    If you get into this screen, resetting the ipod is your best option.

  • What the heck is Accessorize Test?

    Okay.
    something weird.
    Something called Accessorize Test has occured to my Ipod. out of the blue, I turned it on, and it went to Accessorize Test.
    I'm not sure how to fix this, I tried everything the help pages sugguest, but restarting doesn't do anything, nere do any other of the 5 R's.
    it's on a screen that says:
    Please plug FW
    LCD ID : 2
    FWPWR : 0

    Hey @dg3, 
    Thank you for posting in the HP Support Forum.  
    I see that you're curious about 'automatic servicing' when reviewing what looks to be a selection from a print quality issue article pertaining to your HP Officejet Pro 8600 e-All-in-One printer.  I would like to help.  
    Allow me to answer your question as succinctly as I'm able: automatic servicing as a printer user's troubleshooting step is essentially doing nothing but allowing time, and other automated factors to intervene in resolving a print quality issue.  I'm sure that you have noticed that when you turn your printer on, it makes some startup sounds - these indicate that your printer is readying itself for the business of printing, ie. - the carriage is moving into place, the printheads are preparing themselves. Sometimes these automated functions can help resolve a printing issue.  Further, in the context of the article you're reading, sometimes the combined factors of time and powercycling your printer (turning off and on) will clear up minor print quality issues.  
    Does this satisfy your curiosity?  
    Also, since you were reviewing content from a troubleshooting article, do you require any assistance with your printer beyond what you've posted?  Please respond to this post with details if you have any further questions or concerns.  I'm always happy to help fellow Forum users.  
    Thanks again for posting in the HP Support Forum and have a great day!  
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for

  • IPhone Calendar Entries No Longer Sync With iCal or MobileMe Account

    I've been experiencing this for a few months now, and was hoping someone might have some ideas on how to fix this issue I am having. Every time I enter a new entry onto my Calendar from my iPhone... those entries do not show up on either my Desktop i

  • Cant open attachments in my mail since ios7 on iphone 4

    Hi there, since I updated my Iphone 4 to IOS 7, my mail is not working properly. The problem is that I can't open any attachments that I recieve, JPG, JPEG, PNG, PDF etc. I can see the attachment and I can tap on it so it opens, but it keeps loading,

  • Item overview FoC field

    Hi firends, in t-code ME21N at item level, there is a check box for free of cost delivery, whenever I make Purchase Order for Item category 'D' services, and I press enter after filling all the required fields, this check box becomes gray, means no i

  • Dynamic ALV and internal table.

    Hi all, I have a requirement of creating a dynamic field catelog based on input values in selection screen. Example: 1) When I enter date range, say  20/03/2008 to 25/03/2008 I should have 6 columns in the output for each date with column heading as

  • Catalog View not working in CRM ISA  B2B Application

    Hi Experts, Product Catague creation process followed 1. Maintained a Product Catalogue ' B2BCat' 2. Maintained Two Sub areas(Area1 and Area2) and two products for each sub area 3. Maintained a Variant ( for Lang EN and Currency USD) 4. Created a Vie