IPod stuck on "connect to itunes" screen, Help.

Ipod touch 2g 8gb.
Here is my dilemma: Stuck on "Connect to iTunes" screen
The iPod wont change screen, no matter how i boot it up.
And it does not show up in itunes or finder.
It shows up in itunes when i boot in DFU mode (I think) but displays a warning that ipod is in recovery mode and need to be restored before it can be used with itunes. Now, when i click OK it disappears from the side bar and returns me to my library.
I have also tried to connect it to 2 different PC's and no trace of it shows up anywhere.
I have tried countless methods from youtube and google but got no satisfactory results.
I read a few places that iPod touch's cant be bricked. I have never tried any kind of jail break for my iPod.
I have run out of ideas.
Any Help or suggestions are greatly appreciated.

I tried all the suggested fixes, too, including uninstalling and reinstalling iTunes. In the end, I had to disable my security and it let me restore the iPod Touch then.
Still can't get my music onto it again, but that's another discussion topic.

Similar Messages

  • My iPod touch is disabled and has a passcode but it won't let me type in the passcode it's stuck on connect to iTunes screen help!!!!!

    My iPod touch 8th 3rd gen is stuck on the connect to iTunes screen and won't let me do anything and iTunes won't restore it or do anything because there is a password on it and I can't type it in on the touch since it's stuck on this screen help please I've tried doin the power and menu button to restart it and it goes right back to connect to iTunes someone please helpme

    Try again placing the iPod in recovery mode.  It can be tricky. The computer should say it discovered an iPod in recovery mode.  Recovery mode bypasses the passcode (and erases the iPod).  If not successful, try placing the iPod in DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • IPod stuck in "connect to iTunes" screen after updating software

    I wanted to update my iPod touch to iOS5 after waiting for a long time. I synced and transferred purchases twice to make sure all my stuff was in my iTunes library, and then updated it. The update went fine but there was an error message saying that it could not restore the iPod. I went to troubleshooting and it said to update to the latest version of iTunes, which I did, involving a restart. When I started up iTunes again, it said it was the most recent version 10.7 and all of my songs, apps, etc. are in the library. The problem is I can't get my iPod to connect to iTunes now. It went into the connect to iTunes screen before I updated the software and it has stayed like that. I tried plugging and unplugging it, switching the USB ports and cables, putting it into recovery mode, but it will not show up on iTunes or on my computer. I also noticed that when I hold down the sleep/wake button for a few seconds, it shuts down immediately instead of having the "slide to power off" screen come up, and then the apple comes back onto the screen and it goes to the "connect to iTunes" screen again. I have tried all of the troubleshooting guides on the website, but it doesn't change the screen. I tried putting it into DFU mode and something came up on the computer saying "installing driver software" and it said DFU mode or something, which usually happens when I plug in my iPod, but after my iPod wouldn't turn on at first, and when it did, the same screen came up again. When I unplug it from the USB cable, it stays on the screen for about a minute before it turns off and the screen goes black. This is the screen it's stuck on
    I'm not sure what else to do, all suggestions will be greatly appreciated! Thanks so much.

    You try on another computer to help determine if you have a computer or iTunes problem. If it works on the other computer that indicates a computer problem and more work is required to fix that problem.
    If iTunes on the other computer yuo can do the following to make that computer the syncing computer until you can fix the other computer. For how see:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Ipods stuck on "connect to itunes screen"

    I own an ipod touch 8gb. Ive had this problem for awile. any help? ive tried the three 'R's"

    I just got my iPod touch today.I have registered to itunes,though on my ipod I couldn't connect to itunes store, and a message: invalid argument appears on the screen.Please kindly advise me on whta to do next.Thanks..

  • Ipod stuck on connect to itunes screen

    What happened is tha my ipod was jailbroken from 3.2.1 by my friend. I didn't want to jailbreak it so i was looking at how to restore it. When i went to go restore it i saw how long the download would take so i just kept the jailbreak without updating it. What recently happened is that i got faster internet and then went to go update my second generatin ipod to 4.2. I updated and did everything fine then i saw the connect to itunes and i did connect to itunes. When i did nothing happened. When i was looking around for ways to make it go away i saw that my connect to itunes image was the old 8. version, instead of the new 10. version. I was wondering if there was a way that i could resolve this problem and make the connect to itunes image go away.

    I loaded my iPod onto someone elses computer and it worked. Just thought i'd let ya know incase others end up having this problem

  • Need help urgent,my iphone is stuck at connect to itunes screen.when i restore with itunes it shows error -1. please help me

    need help urgent, my iphone is stuck at connect to itunes screen, when i restore it using itunes, it shows error -1...may someone help me plz....

    See:
    iOS: Unable to Update or Restore
    http://support.apple.com/kb/ht1808

  • HT201263 i need help please i'm stuck in "connect  to itunes" screen reseting my phone didn't work and i can't sync to itunes

    i need help i'm stuck in "connect to itunes" screen reseting my phone didn't work and i can't sync to itunes

    Do as the screen shows - connect the iPhone to the computer you usually sync with and use
    iTunes on that computer to restore the iPhone.

  • Phone stuck on connect to itunes screen after update attempt

    Hi, hope someone can help me. I connected my iPhone to my computer to transfer my photos from the phone to the PC. I have automatic syncing turned off.
    When I connected, I was prompted to update the iTunes version, which I did. It's now version 9. Then I attempted to update the iPhone version. I got a message saying I had to transfer my purchases first, which I did. Then I tried the update again. The update seemed to take awhile, then I got a message saying it failed. There was a "More Information" button which just prompted me to send info to Apple, which I did. Unfortunately I didn't save the info.
    At that point all my iPhone info no longer showed in iTunes, and the only active option is Restore. It does say "Your iPhone software is up to date," which would seem to indicate that the update did work...I tried disconnecting and reconnecting my phone. When I do this, I get the message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    I would rather not Restore the phone unless I have no other options, since I have 600 pics, contacts, etc on the phone...Of course not backed up since this is the first time I've tried to transfer data.
    So I tried a few things:
    - I disconnected and reconnected the phone several times.
    - I restarted the computer several times.
    - I went to the Apple site and tried the troubleshooting steps for "stuck on connect to itunes screen" (which is what my phone is currently doing).
    - I ran the diagnostic checks in iTunes (output below - I ran this while the phone was plugged in yet it says it's not found).
    - I held down the Home and the Sleep/Wake button until I see the Apple icon.
    - I went to My Computer > Manage and tried to update drivers, but the phone doesn't show in the device manager.
    - I tried a different USB port and there are no other devices connected to the machine.
    Nothing worked, my phone is stuck on the connect to iTunes screen and I get the error message every time I plug it in. I haven't tried another computer bc I don't have one and I'm not sure how to create/use another user account on this machine.
    I wouldn't mind calling support but my phone doesn't work...Any help is much appreciated. Thanks in advance.
    ============
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    ASUSTeK Computer INC. 1005HA
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    Current user is an administrator.
    The current local date and time is 2010-03-31 02:42:39.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 945 Express Chipset Family
    Mobile Intel(R) 945 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-03-31 02:22:42.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    iPhone 3G running firmware version 3.0
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Message was edited by: gobblygook
    Message was edited by: gobblygook

    Your only choice at this point is to restore your iphone. Since it appears from your post that you have never synced to this computer, you of course will not have a backup to restore from. That means your only choice is to restore as a new device & re-sync your itunes content. Unfortunately, all of your contacts, calendars, pics in your camera roll, etc., will be lost. Its not a good idea to use the iphone or any phone for that matter as a storage device, as things like this can & do happen. You should be syncing on a regular basis. The first thing done when you do sync is an iphone backup. You should also transfer pics in your camera roll to a supported application on your computer on a regular basis, much like any digital camera. You can always sync pics back to your phone, but if the only copies are on the phone, you run the risk of losing them.
    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Stuck on connect to itunes screen and not recognised in windows

    help please
    ipod 4  is stuck on connect to itunes screen and itunes or windows will not recognise that its connected. My iphone connects straight away so its not the pc.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPhone 4 Stuck on 'Connect to iTunes' screen.

    I.. was kinda trying to get rid of the iOS 7 update files which were automatically downloaded to my iPhones following this discussion page: https://discussions.apple.com/thread/5379403?start=0&tstart=0
    Following the instructions posted there, I managed to get rid of about 3GBs of the iOS 7 files out of my iPhone 5.
    What I followed was nzzzzz's 'Method B'
    Method B: Open Settings->General->Software Update, Click "Install Now". There will be a prompt says "Verifying update...", Wait until this prompt disappear, there will be a spinning wheel on the black background. Immediately press and hold both of the power and home buttons at the same time. DO NOT release the power and home buttons for about 10 seconds. Your device will reboot. It's done. The automatically downloaded firmware will have been deleted. Now read part 1 to prevent automatically downloading in the future.
    However, when I tried it again on my iPhone 4, it's now stuck on 'Connect to iTunes' screen.
    No DFU modes or recovery modes seemed to be working, so I gave up and decided to restore & upgrade to iOS 7.
    Then there was another problem, iTunes 'did' recognize the device as in 'recovery mode', downloaded the 7.0.3 update file, and tried to restore the device... but it got me 'error 9134'.
    I followed the instructions on forums and discussion pages, and even called the Apple Care Services for technical support... but nothing worked. Nothing.
    All those 'hosts' file edit and iTunes removal(and other following services) + download/install to the latest iTunes did not work on me, and now the device is 'just stuck on Connect to iTunes' screen.
    Any suggestions..?
    (BTW, English is not my native language, so if there's anything that cannot be understood, tell me)
    + Thanks in advance
    Additional info:
    iPhone 5: Tried to remove the iOS 7.0.3 files on iOS 6.1.4
    iPhone 4: Tried to remove the iOS 7.0.3 files on iOS 6.1.3
    Windows 8. latest iTunes (Newly bought computer + latest iTunes installed on 10/26/2013)
    Windows 7, iTunes v 11.0.4.4 (The computer that successfully factory-resetted my old iPhone 4S and iPhone 4. The same computer that's not working with the same iPhone 4 now.)
    Plus, my iPhone 4 is not backed up... not even in iCloud I think... There are some old pictures I'd like to keep, but almost forgot to get them out since I bought 5 a few weeks ago. I was using the iPhone 4 for the TV cable with the 30-pin connector.

    Hi, I solved this problem on my iPad.
    First I followed the steps here: http://support.apple.com/kb/HT4097?viewlocale=en_US  and recovered the iPad. iPad turns empty like new.
    Then I followed the steps here: http://support.apple.com/kb/HT1414?viewlocale=en_US (Option: Restoring your iPhone, iPad or iPod Touch) and restored my iPad from a previous backup from iTunes.
    When the backup restore was finished, many apps were missing on my iPad. I synchronized it again with iTunes (it took a while although I don't have many apps) and everything was back exactly as before.
    I don't know what caused the problem in the first place, being stuck in the iTunes USB screen, but it seems to be solved now. I will anyway try to always remember to close all apps and not leave them running in background. Maybe my iPad got confused?
    Regards
    Sonja

  • IPhone3G got stuck on connect to iTunes screen while doing upgrade iOS 4.2

    Right after my iTunes 10.1 downloaded the iOS 4.2, it automatically started installing and sync-ing to my phone as usual.
    It restarted itself, apple logo came out and ...
    1. Stuck on "connect to itunes" screen eventough it was connected for the whole time. Unplugged it and plugged it back in, still got the same screen.
    2. Neither my PC or itunes recognize it at all.
    3. Unable to do soft reset but hard reset is ok. When i turn it on, the same screen comes out after the apple logo and got stuck until it turns itself off in about 30 sec.
    3. Tried to connect it to the usb/itunes many different ways when the "connect to itunes" screen is on, but still got the same result.
    4. Tried to do factory reset by holding the home button and connect it to the usb until the itunes recognize it, but still no luck (u can be sure on that it was properly done since it's not the first time i'm doing it).
    FYI: the phone has never been serviced or customized.
    Need some help ASAP here ppl. Please!
    Message was edited by: Barsaa

    I'm having the same problem too. I've been trouble shooting it based off advice from Apple's website and other people's information but so far nothing has worked. When I turn it on, it says connect to iTunes. I do. When I can get iTunes to recognize the iPhone is plugged in (which I seem to be able to only do when I stop and restart the Apple Mobile Device service), it says the phone is in recovery mode and has to be restored. I go through the process and so far it always stops on the "preparing iPhone for restore" process. Then I get the following error message ... the iPhone "iPhone could not be restored. An unknown error occured (1604). I seem to keep getting the 1604 and I haven't found a workable resolution yet for it.
    If anyone could help, I would be so appreciative.

  • IPad stuck on "Connect to iTunes" screen after iOS 8.0.2 Update

    Attempted to update to iOS 8.0.2 last night on my 4th Gen iPad. After verifying the download, the iPad instructed me to "Connect to iTunes". Once connected, iTunes stated that my iPad was in need of a restore, which I attempted to do so. Upon "extracting software" iTunes states that it cannot recognize my device and fails the restore. My iPad is still stuck on "Connect to iTunes" screen.
    So far I've:
    Attempted restore on iTunes 3 times
    Attempted hard restart (reboot) by holding home button and top button down for ten seconds.
    Don't know what else to do, Please Help!!!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT201263 I did all these steps and my phone is still not responding. It is stuck on connect to itunes screen.

    My phone is stuck in "connect to itunes" screen and will not budge. I did the recovery thing and it still will not change. PLease  help.

    Hello Melanie229,
    Thank you for using Apple Support Communities!
    Based on what you are describing I would next connect the phone to the wall charger that it came with, and reset it.
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If your device stops responding, you can reset it by pressing and holding both the Sleep/Wake and Home buttons for at least ten seconds, until the Apple logo appears.
    Then try the restore again.
    All the very best,
    Sterling

  • Iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode it trys to extract the data and then says the phones memory is full

    iphone 5 stuck on connect to itunes screen- if i try and get it out of recovery mode via itunes,  it trys to extract the data and then says the phones memory is full- cant seem to get it sorted, any ideas? I have an ipad mini if that helps?!

    Hey craigfromsheffield,
    I would suggest that you use the following information in order to help you resolve this issue:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • IPhone stuck on "Connect to iTunes" screen. Connect to computer, "USB device not recognised". Can't reset. Suggestions?

    Above says it all. Frustrated, no one seems to have an answer. Anyone know of anything that could get me closer to fixing it?
    Happened when iPhone 4 was updated to iOS 5. Problem was Kaspersky was on - I know this because I have had trouble when updating my iPhone in the past when it was on. Unable to get anywhere in terms of restoring because it's stuck on Connect to iTunes screen, computer won't recognise it and reset won't work.
    Any help would be appreciated. Thanks in advance.

    I had this problem before and fixed it. Its happened to me again very recently so its not uncommon. I had to completely uninstall ITunes and most importantly uninstall Apple Mobile Device Support which can all be found in the uninstall programs in the control panel. once you have done that, re install the most up to date iTunes (don't worry about having to find another Apple Mobile Device Support software as the most up to date version of that gets installed with iTunes). Once that is done take out the USB cable make sure the iPhone is off or blank ad iTunes is not open. Then simply plug in the USB and iPhone you don't have to hold any buttons and the phone should light up and you get a message about the apple mobile device support software being installed then itunes opens asking if you want to restore this iPhone. if this doesn't work don't worry take out the phone and try a different USB socket making sure iTunes isnt open for some reason it doesnt like it open.
    Hope that helps im only saying whats helped for me so sorry if it doesnt for you

Maybe you are looking for

  • Complex Payment Terms

    Hello Experts, We are currently implementing SAP and have a question regarding payment terms.  We need to implement the following set of terms for a group of customers. If the payment is received: 61 days or more since invoice was submitted to custom

  • Exporting Crystal to EXCEL

    Post Author: naissani CA Forum: Exporting I am trying to export the crystal report to Excel from Web but I am getting the following error. I would appreciate if anyone can help me out. when I tried to export to Word or PDF it works fine. I am using C

  • Crystal Reports Date Parameter Problem

    Hello Experts, I have this query in crystal, I need it to be suming the Quantity and Totals but because of the date optional its not doing that, How  I put the date parameter and remove it from her so that I can achieve my results. SELECT T0.[DocDate

  • Does child systems with 3 clients need 3 RFCs?

    Hello One quick question Does child system that has 3 clients need 3 RFC conenctions to connect to CUA? We have ECC with 3 clients. When I go in one client SM59 and create RFC connection to CUA, everything is good. When I go in SM59 of other client a

  • TreeView doesn't appear in console...

    Hi I just installed WLS 6.0b, and when I run the console, there is nothing in the left panel of the page... which is supposed to be a treeview. I see the page on the right though :) Does anyone knows why ? Thanks David