IPod stuck on white screen

I turned my iPod on today and the screen is all white with no text and I can't get it to change, turn off, or do anything except display a totally white screen. When I plugged it into iTunes it told me that the iPod is corrupted and I need to restore it but when I tried to restore factory settings it ended in failure because "the requested resource wasn't available."
Whats wrong with my iPod and how do i fix it?

This is the same problem I have...it asks you to restore it and if you restore it, you lose all your songs and stuff, right?
Actually, the problem I had is kind of different...mine wouldn't turn on. I guess I was out of battery anway.

Similar Messages

  • Ipod stuck on white screen of death cant get to itunes because i cant type in password

    my ipod touch is stuck on the white screen of death and i cannot wipe it and reload ios because in order to hook it to itunes i have to put in my pass and i cant see anything!!! I tried holding the power button and the home key it goes off bthen back to white screen then goes off and stays off.. this also occurs when i hold the home key + power button+ volume up button. I have no idea what to do any help would be greatly apperciated....

    You have to let the battery drain. It should do this fairly quickly since displaying a white screen uses battery. The battery's dead when the screen shuts off, and this will force it to power off. Charge it up and it should power back on.

  • IPod stuck with white screen?

    Hi, my daughter was playing a game on her iPod touch and suddenly the screen went white.
    I can't turn it of nor does it respond to anything. HELP!?!?
    Misha

    Press and hold the Sleep/Wake button and the Home button simultaneously for about 10 seconds until the apple logo appears.
    You may want to do a restore using iTunes after this or avoid having too many Apps open at once while she plays that specific game.
    Hope that helps Mishab :]

  • My Ipod touch 4th gen is stuck on white screen.

    My iPod is stuck on white screen. PLEASE HELP!

    Try the white-screen topic here;
    iPod touch: Hardware troubleshooting
    If not successful, let the battery fully drain. After charging for an hour try the applicable stuff in the article.

  • HT201412 my ipod touch 4g is stuck on white screen and none of the buttons work and holding home and sleep button doesnt work either

    hi im abishek and my ipod touh 4 g is stuck on white screen and holding he power and hoe button doesnt work.what should i do?????!!!!!
    and also my ipod doesnt show upp on itunes so i cant restore it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1567 When I plug my ipod into my computer I no longer am able to go to itunes and my ipod will not play the songs i recently downloaded.  My ipod has a white screen. At one point i got a message that it was corupted.

    when i plug my ipod into my computer it no longer takes me to itunes. my ipod screen is a white blank and i can no longer listen to tunes i have downloaded.
    at one point i received a message that said it was corruped.

    My ipod has a white screen.
    This forum category (where your question appeared) is for iPod shuffle, which has no screen.  What iPod model do you have?
    When you connect the iPod to your computer, and run iTunes, the iPod does not appear in the sidebar, under DEVICES?
    At one point i got a message that it was corupted.
    Where and when did this message appear?

  • Macbook stuck on white screen with apple logo. help please

    I have a macbook (black model) and while I was surfing on internet it is frozen. so I shut it down and restarted. When I restarted, it stuck on white screen with gray apple logo and seems like booting but nothing happens.
    after that, I restarted again and put installation disc (leopard) without pressing any key and it opened normally. I backed up os with time machine but in one hour it is frozen again.
    restarted again but this time it did not boot normally. so i tried booting from cd with c key, it opened installation screen. I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported.
    After all, I tried to erase and install system several times, but after language section when I click agree to terms and conditions, mac freeze again.
    So, I do not know what to do. Any help please?
    Note: I already tried PRM and Safe Mode. (after safe mode it took me to installation screen again and nothing changed.)
    Any help would be much appreciated!
    Uptade: Also, opened system profiler and clicked on Serial-ATA, it seems loading but do not show any info. stucked again! help please
    Message was edited by: burakbey

    HI,
    *"I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported."*
    You need to select "MacintoshHD 10.5.8 not "disc image" in order to run Disk Utility and Verify and if necessary, Repair the disk.
    That's why you are seeing this dialog.
    *are unavailable to click and S.M.A.R.T status is not supported.*
    Also, run the Apple Hardware Test.
    http://abclocal.go.com/kgo/video?id=7011117
    Carolyn

  • HT1338 i cant get in to os system. the screen just stuck in white screen and apple logo

    i can not get in to my os system. the screen just stuck in white screen and apple logo

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • HT201406 iPod has a white screen. Tried fix suggestions. Nothing works. Can you help?

    iPod has a white screen. Tried fix suggestions. Nothing works. Can you help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1414 my ipod touch in white screen when i connect to the itunes can'tbe detected

    my ipod touch in white screen when i connect to the itunes can'tbe detected

    If not sucessful try:
    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • 27" 2009 iMac is stuck on white screen after OS X Maverick update

    27" 2009 iMac is stuck on white screen after OS X Maverick update.  How do I get past this White Screen?  I have tried to use the PRAM reset, holding down Shift,Command, R, and P after turning off computer then when I turn it on, having those pressed until I see the apple symbol.  I only hear one chime. Never get to a second chime.  Thank you.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • Apple Hardware Test Stuck with white screen

    hy every one..............
    i am unable to start the apple hardware test ,i've done anything ,holding d at start up with inserted installation disk,also with holding c........
    also inserted application cd....
    apple logo appear and after some time with spinning wheel it stuck with white screen....What that means
    please help me out....
    what can i do???

    If you are still using Snow Leopard -
    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
    If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems.  It's what you're paying them for.
    Out of warranty - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • Ipod touch has white screen instead of home page, cant acess anything, any ideas?

    problem acessing Ipod touch. have white screen instead of home page

    dude your going to have to take it to apple because i can't tell if it's a hardware or software defect. your ipod might not be in warranty unless you got apple care.

  • Ipod touch has white  screen and not responsive

    ipod touch has white screen and not responsive, pls. suggest solution

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • 3rd generation ipod touch has white screen with lines going down. Can't access anything. Any ideas?

    My 3rd generation ipod touch has white screen with lines. Can't access anything. Any ideas?

    Have you tried connecting the device to iTunes in recovery mode and restoring it? See this article for instructions on getting your iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

Maybe you are looking for