IPod Stuff doesn't work with my new iPhone

I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
Do I need a special cable or something?
Also, my car charger for the iPod doesn't work with the iPhone.
Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
Thanks!

Both my mini and my video iPod were USB -- not Firewire.
Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

Similar Messages

  • I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

    Mike wrote:
    > Could someone tell me why this prototype-based lightbox
    seems to work on one
    > of my sites but not on the other?
    >
    > I literally took the exact same .js & css files,
    copied them over from one
    > site to the other, but it's only partially working on
    the new site.
    >
    > Works :
    >
    http://www.roxanacampagiorni.com/
    >
    > Doesn't work :
    >
    http://www.vilverset.com/sample.html
    >
    > Been troubleshooting this one for days, and I'm stumped.
    Script wants
    > nothing to do with lightboxing HTML files on the new
    site. Only straight
    > JPGs. But it was written to work with them, and it
    *does* work with them
    > just fine on the *other* site.
    >
    > Where is the anomaly between the two sites that's
    causing it to break in
    > sample.html?
    >
    >
    Not sure if this is relevant but on the page that works you
    have these
    js files linked - 4.....
    <script type="text/javascript"
    src="/scripts/jscripts.js"></script>
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    and on the page that doesn't - 3......
    <script type="text/javascript"
    src="/scripts/prototype.js"></script>
    <script type="text/javascript"
    src="/scripts/effects.js"></script>
    <script type="text/javascript"
    src="/scripts/control.modal.2.2.3.js"></script>
    HTT
    chin chin
    Sinclair

  • TS1484 Will a Nike + IPod sport kit sensor work with a 4s IPhone?

    Will a Nike + IPod sport kit sensor work with a 4s IPhone?

    I dont doubt your claim of 55-75 hours of usage
    solely on running since january. Even though you say
    that it has died prematurely with the range of hours
    you give since the time you purchased the sensor.
    I must ask if you were concious of turning off
    the sensor when it was not in usage. You know
    hitting that little button on the sensor itself to
    deactivate the battery. If your answer is no that you
    never remembered to turn off this sensor then. Your
    idea that it has died prematurely is bad. Because
    without physically turning off the sensor itself
    (thats the portion in the sole of the shoe) then it
    has been on 24/7 since you purchased it in january.
    Now if you have remembered to turn off the sensor
    after each run then it might have died prematurely.
    IF thats the case I would contact apple or the place
    from which you purchased it and ask for some help
    regarding the sensor.
    GFF:)
    Umm, no: From the FAQ
    "The sensor’s battery has a life of more than 1000 active hours. The sensor has a sophisticated built-in power management system which means that the sensor really only consumes power when active (that is, when it senses motion)."
    Mine is now showing the low battery indicator at 277 hours. I'm not the only one with premature battery failure.
    http://forums.nike.com/message.jspa?messageID=85240
    http://forums.nike.com/thread.jspa?threadID=6102&tstart=0
    There are more threads (just search on "sensor battery").
    This should be covered by the warranty. Can someone from Apple please respond to this thread?

  • My remote Control doesn't work with my new imac

    I have a brand new iMac 27" with mountain lion, and Doesn't work with my aluminium remote control, I already follow the steps on Help, but there's no IR option on the advanced button of security and privacy. Of course I already check with my iphone dock and the batteries are OK, So I think it's a bug from the OS.
    Any thougths?

    Thanks mende1.
    Apple that, *****!!

  • My FM transmitter and car charger doesn't work with my new iPod Touch.

    As stated in the subject, when I connect my new iPod Touch to the FM transmitter and/or car charger that I was using with my iPod video, it doesn't work. When I connect the transmitter alone, nothing happens and when I connect the car charger, a screen appears that says something like, "charging not supported with this device"
    Has anyone experienced these issues? Or does anyone know of a solution???

    I bought the new iPod Touch 3rd Gen 32Gb model on the day they were announced. This is my first iPod, but my wife already owned an iPod classic. I tried the car charger that we had bought for her older iPod and I too got a message something like, "charging not supported with this accessory".
    I saw the previous response and went out to shop for a new adapter. I found a Belkin kit that included the auto 12v power socket adapter that one can plug a USB cable into. The unit came with a USB cable that plugs into the iPod docking port. The kit also came with an AC home adapter with one USB port. My newer iPod charges just fine with both of these adapters.
    So I would agree with the previous post. The newer units need the newer USB charging adapter rather than the older basic 12v adapter.

  • HT1451 My 2004 iPod doesn't work with my new Windows 8 computer. If I get a new iPod nano, will I be able to sync my content from my old iPod?

    If I replace my 2005-era iPod with a new nano, will I be able to sync my existing content? Currently my Windows 8 will not allow me to access my music, etc., although I can see it. Took forever to event get iTunes to recognize my device--lots of removing of Apple software, downloading again, etc.

    You can sync from your computer to your ipod.

  • Help! My iMessage doesn't work on my new iPhone 5s, I've changed my sim twice, but iMessage only works with my Apple ID.

    Recently got a new iPhone 5s and the iMessage doesn't work. I tried the sim in another phone and it didn't work either so I put a completely new sim in my iPhone and iMessage doesn't work. It will only work when I use my Apple ID for received messages. I don't know what to do. I have reset everything and it still doesn't work. My software is up to date. Please help!

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

  • The sync doesn't work with the new version

    Hi, I have a Macbook version 10.4.11 I just to work with the  pocketmac for blackberry former version and It use to work great but since I did upgrade to the new version they system doesn't sync any contact, meeting....
    The system recognize my Blackberry  PIN and the status is "available" but nothing happens.
    Any suggestion?
    Thanks 

    I tried a whole slew of things and did manage to get it to sync by syncing each component one by one just to see if there was a problem area such as tasks or notes. That went fine but when I tried to do a full sync will all the components I need the sync would run and then then PocketMac would freeze and crash. Yesterday I decided I had spent more than enough time on this and bought MissingSync. So far it's great.

  • IPhone 4 "iPod" features do NOT work with the new 2011 Infinite M37

    just recently bought teh 2010 Infinite M37. I connected the new iPhone 4 to it via the USB cable. It showed connected in the M37 display dash....even showed the typical navigation menu (i.e. playlists, artists, songs, etc). However, I was unable to navigate at all in the menu (it appeared locked....and yes, i had entered my passcode on the iPhone , or play any songs. Also, when I played Pandora, it also did not go through the car speakers.
    I've always bought the Infiniti's.....and they've always worked with my iPhone 3G. Looks like either this car is an exception, or something has seriously changed with the iPhone that prevents it from working.
    My question is I wonder if Apple is working with any car manufacturers to address this. My guesss is that Infiniti can be the only car that will have this issue.

    Many thanks for further clarifying.
    I don't know 100% for sure that the Apple USB cable for the iPod Touch is different than the Apple USB cable for the iPod Touch 2G.
    But:
    I have read (somewhere) that the tiny pin connectors are different. That is why an iPod Touch 1G could be charged by (for example) a Logitech mm50 Speaker set and an iPod Touch 2G cannot.
    An iPod Touch 2G can still connect to the Logitech mm50 Speaker set. It will still play and you will hear music. But it is no longer charging. And I have read of iPod Touch 2Gs getting very hot in these cradles. That can't be good for the poor iPod in the long run.
    So for the Apple USB power adaptors to work, (which both came out before the iPod Touch 2G), they must have some override or blocked pin if they can work with both generations of iPod Touches.

  • Waves plugins doesn't work with the new Logic X?

    All of my Waves plugins included in the Complete V9 bundle doesn't appear with the "upgrade" to Logic X. Even I re-installing the plugins Logic X seems to ignore them...
    Someone with this problem? Anyway to solve that?

    AndersonPiah
    For Waves v9 64bit version..
    Did you also run  the Waves AU Reg Utility 9.2 or later.. found in the applications/waves/waveshells folder?
    If not, quit LPX and run the AU reg util.
    Then, restart LPX and V9 should then be validated correctly and available in LPX via the Insert FX slots.
    Waves V9 working fine here with LPX and 10.8.4
    Salvarado,
    As zbaig stated, you need to update to Waves v9 64bit... as v8 was 32bit only and is no longer supported within Logic Pro X

  • Ipod cannot be disconnected / old Ipod charger doesn't work with nano 3G.

    Hey,
    i have problems to disconnect my ipod nano 3gen. from itunes!
    It says that it cannot dosconnect the ipod because there are programs which use files on it. So how can i disconnect it savely? Can i use the windows hardware disconnect "tool"?
    +solved! it was my defragmentation tool...+
    My second problem is that an old ipod charger only works with ipod 5gen and ipod nano 2gen. but not with my ipod nano 3gen. Is there anything wrong with it?
    If so, which charger can i buy?
    I hope you can help me!
    Greetz
    Phil from Frankfurt!
    Message was edited by: gamerphil

    thanks for your help :P
    no answers?

  • [SOLVED] CPU scaling doesn't work with the new kernel

    I just updated my kernel to 2.6.16.1-7, but now my CPU scaling doesn't work anymore.
    root@vanessa ~# modprobe cpufreq_userspace
    root@vanessa ~# modprobe speedstep_centrino
    FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    and the last line of dmesg:
    speedstep_centrino: Unknown symbol acpi_processor_preregister_performance
    Any ideas? Looks like this is an error in the speedstep_centrino module.. bit. As far as I know I hadn't this error with the -6 kernel package..

    did you anything else except update your kernel version? because the problem isn't gone away here
    [cagnulein@cagnulein ~]$ sudo modprobe speedstep_centrino
    Password:
    FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such device
    and powernowd
    [cagnulein@cagnulein ~]$ sudo /etc/rc.d/powernowd start
    :: Starting Powernowd [BUSY]
    powernowd: PowerNow Daemon v0.97, (c) 2003-2006 John Clemens
    powernowd: Found 1 scalable unit: -- 1 'CPU' per scalable unit
    /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq: No such file or directory
    PowerNowd encountered and error and could not start.
    Please make sure that:
    - You are running a v2.6.7 kernel or later
    - That you have sysfs mounted /sys
    - That you have the core cpufreq and cpufreq-userspace
    modules loaded into your kernel
    - That you have the cpufreq driver for your cpu loaded,
    (for example: powernow-k7), and that it works. Check
    'dmesg' for errors.
    If all of the above are true, and you still have problems,
    please email the author: [email protected]
    [FAIL]

  • Ear receiver doesn't work on brand new iphone 4.

    Whenever I receive calls or make calls I don't hear the person on the other end, the ear receiver doesn't work. Update is fine (iOS 6.0.1) and as I mentioned it's brand new. Please help.

    May I know what message you get when you try to access BBM? is it accessible? unable to send and receive?
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • How do I get Sync to work with my new iPhone?  Sync stops at step 2 of 5 steps.

    I have a new  iPhone and am trying to sync the music I downloaded from the cloud on my phone with iTunes on my PC. After clicking on sync on my computer the status bar stops on step 2 of 5 steps.  I have checked to make sure my computer is authorized in iTunes. 

    Based on what you've posted, your computer does not have the right tuner.   You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
    QAM tuners to record local channels only
    This requires Windows Vista or Windows 7
    Hauppauge WinTV-HVR-2250
    SiliconDust HDHomeRun (info on a sale)
    CableCard tuner to record local and cable channels
    This requires Windows 7 + one CableCard from Verizon for $3.99/mo
    ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
    Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
    Make sure your computer has Windows 7 Home Premium (or better) installed.   That's necessary to support CableCard tuners.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

  • I have a new ipod nano;  it won't sinc after i plug in and connect to itunes;  i've done this many times, but this time it doesn't work (with the new one);  suggestions?

    any help is appreicated in helping me figure out how to sinc my new ipod nano;  i'm trying to do it the way i've done it many times in the past, but this timeit won't sinc.  Suggestions?

    Because the Nano was previous synced to another comuter/iTunes library.
    See the following:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Maybe you are looking for