IPod Sync Error after Upgrading to iTunes 10 and ios5

Some help please,
I've upgraded to iTunes 10 and installed ios5 on to my iPod Touch and I cant now sync as iTunes reports that the backup is corrupted or not compatable with the iPod
Thanks
Kris

Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel

Similar Messages

Sync problems after upgrade to iTunes 9

I've seen lots of posts on this but none that directly match my situation. Bought a few TV eps that required upgrade to iTunes v9 so I upgraded. Now only some of the shows will sync to my iPod. Following the sync I've noticed that it is now also removing TV shows that were previously on the iPod, and removing or not locating shows and videos within iTunes which have been there for awhile. These shows are still showing on the iPod though - the whole thing is a mess.
I have a Dell Inspiron 8600 with extra memory and a Seagate 320g external drive that hold iTunes. The iPod is a 32g classic.
Any hep would be appreciated.

I have very similar symptoms after upgrade to iTunes 9.1. During sync of Calendars (or if Calendars disabled, during iPhone backup step), Outlook hangs & sync never completes. Outlook stays hung, and hangs again if I kill and restart, until I reboot. Hugely frustrating.

Sync hangs after upgrade to iTunes 9

After upgrading to iTunes 9.1.0.79 from 8.xx last week I have been unable to sync Outlook contacts and Calendar - sync hangs and never completes.
iPhone 3GS on 3.1.3
(No other changes made to laptop at the time - direct issue with upgrade to iTunes 9)
Spend 1:45 on phone with Apple Support last week - very helpful - but no fix, and frustrated. (Have case number) Removed all Apple Apps - reinstalled, looked for list of DLL's on my PC etc during the call.
Any new ideas to resolve will be gratefully rec'd, or fix from Apple.
Many Thanks.

I have very similar symptoms after upgrade to iTunes 9.1. During sync of Calendars (or if Calendars disabled, during iPhone backup step), Outlook hangs & sync never completes. Outlook stays hung, and hangs again if I kill and restart, until I reboot. Hugely frustrating.

Ipod not connecting after upgrade to itunes 8

After upgrading to itunes 8 my ipod (nano) will no longer connect to my computer and is not recognised by itunes. When I connect the ipod I get the windows 'install new hardware wizard' running but however I try to work through this I get nowhere. Looking at Device Manager in Windows says there are no drivers for the ipod - it has a little exclamation mark next to it.
My wifes brand new ipod will also not connect and its straight out of the box.
Not at all sure what to do next. The support pages don't seem to cover getting the install new hardware wizard. Any help or advice please!.

Ben888
Having reported this to my dealer, and them agreeing to supply a new lead to try, I had one final attempt at resetting the iPod.
Having restored, reset and updated the iPod half a dozen times before without success, a reset as described here:
http://www.apple.com/uk/support/ipod/five_rs/classic/
worked and it is now merrily playing again in the car with the original lead.
It would seem that Apple have developed another piece of spectacularly temperamental equipment........and people slate Microsoft!
Hope it works for you as well!
Message was edited by: petejigsaw
Message was edited by: petejigsaw

Ipod Touch Overcapacity Error after Upgrade to itunes 11

I just upgraded to itunes 11 and when I tried to connect my 32gb ipod touch it would not sync because it was over capacity by over 40gb.
I have a 64 bit windows 7 os.
What I have tried so far:
1) reboot ipod
2) reboot computer
3) Restore ipod
4) uninstall and reinstall itunes
None of that has worked.
I have unchecked every single thing within the menu so that there are ZERO FILES on my ipod but it still shows over capacity by 10 gb even when it is actually 100% empty.
I have saw other instructions that said this might have to do with the AAC conversion using a bad estimator but even when i unchecked that there was no change.
All of the extra usage seems to be tied into the "audio" category.
Please help!

Try this article. http://forums.macrumors.com/showthread.php?t=445821. Hope this helps!

Iphone stuck in restore after upgrade of itunes and iphone

Hi Hope someone can help. Yesterday I there was a new software upgrade for itunes which I did, When I connected my iphone to sync straight after itune upgrade I was also prompted with new software for the iphone this fell over in the process, The phone now wants to restore but gets so far and stops with error 1603. I've tried reinstalling itunes. Any suggestions??

Welcome to the discussions,
did you make sure that all Apple software components where removed before you reinstalled iTunes? http://support.apple.com/kb/HT1923
After that, make sure that the USB drivers are installed properly and Apple Mobile Device Service is active: http://support.apple.com/kb/TS1538
Troubleshooting USB connections: http://support.apple.com/kb/TS1286

Error after upgrade to iTunes 10.5.2.11

After upgading to iTunes 10.5.2.11, I get the following error while synching my iPod Nano (4 years old): The iPod "Name of the iPod" cannot be synced. An unknown error occured (-39). I am on Win 7 64 bit OS. I have already tried to repair iTunes. Please help.
Thanks,
Kamran

Try this article. http://forums.macrumors.com/showthread.php?t=445821. Hope this helps!

Syncing Error after upgrading to iOS4

After my 3GS backs up for what seems like forever, I get "Syncing Error (-50). It seems to sync everything correctly except for my photographs. Nothing appears except "Camera Roll". I've had my iphone for a year and never had any issues until the iOS4

Delete the photo cache as described here:
http://support.apple.com/kb/TS1314

SYNCING ISSUE AFTER UPGRADING TO ITUNES 10

I upgraded to the new version of itunes 10 and now I receive the message that the "ipod is synced with another itunes library, Do you want to erase this ipod? an ipod can only be synced with 1 library? the only option provided is to erase and sync replacing the contents of my ipod with the most recent purchases in my itunes library.
If I do this I will loose all of my prior purchases. Help

Bob,
here we go:
(http://support.apple.com/kb/HT1692
for XP: http://support.apple.com/kb/HT1925
for Win7: http://support.apple.com/kb/HT1923

Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
My Question:
1. Does anyone else have similar problems?
2. Is it related to the Oppurtunistic Locking thing?
3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
4. If it's related to Oplocks, how can I change the setting on the server?
5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
Thanks for your time! :-D

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

Ipod not recognised after upgrading to iTunes 11.2.2

I upgraded ITunes to version 11.2.2 yesterday afternoon and have tried to update my ipod classic this morning.The ipod is not recognised in ITunes nor does it appear in My Computer. My partner has plugged in her Ipod nano and this is not recognised either. Have done all the recommended troubleshooting, which doesn't work. What's happening? I am using Windows 8 on a brand new laptop.

Hi 22Archie,
If you are having issues with your iPods not being recognized by iTunes on your Windows machines, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen it):
Apple Support: iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Regards,
- Brenden

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

I just tried to connect and sync my iTouch (4G) to iTunes and I got an error message that said :This iPod can'be used because Apple Mobile Device service is not started". I tried searching my PC for the program and no luck. Any suggestions?

I just tried to connect and sync my iTouch 4G to iTunes and got this error message: " This iPod can't be used because Apple Mobile Device service is not started". I just did the upgrade fo Safari and iCloud. Any suggestions?
Thanks!
Dan Farrell

I corrected the link in the previous post you responded to, but here is the correct link again.
http://support.apple.com/kb/ts1567
B-rockt

Can't Recognized iPod device after upgrading to iTune 7 / 7.0.1

After upgrading to iTune 7 (and later 7.0.1), my iPod Video 60G (firmware 1.2) has been having problems getting recognized by my desktop.
Symptoms:
- Device manager in Windows 2000 reports the device as an Unknown USB Device
- The iPod won't get recharged nor sync'ed.
- The "Do not disconnect" screen won't appear on the iPod.
- Since Windows can't recognize my iPod at all, of course I won't be able to see it in iTune.
I plugged the iPod to my Dell laptop and got it recognized and recharged properly though.
After poking around for a long time, I figured that if I disable the USB 2.0 Enhanced Host Controller on my desktop (thru the Device Manager), I can finally get the iPod recognized properly. Problem is, now it takes forever for me to sync my iPod (USB 2.0 disabled, so I'm stuck with the slow USB 1.1)...
I noticed that after upgrading to iTune 7, the display backlight on the iPod is kept on (though dim). If I remember correctly, on older versions of iTune, the backlight is completely off. I'm suspecting whether the extra current draw required by the dim backlight is screwing up my desktop USB....
Anybody from Apple gonna look into the issue and consider turning the backlight back to off in the next release??
Windows 2000

I have no problems on my Dell laptop... I'm having problem with my 4-year old non-brand-name desktop only.
... which is kinda abnormally 'cause normally you would expect USB 2.0 power problems on laptops only. Btw, I've got the latest drivers installed already for the chipset and Win2K etc...
What's more interesting... is the fact that on older iPod firmware, everything was running just fine... upgrade to iTunes 7.0 and boom... I'm having problems. And, it's not recognized at the Windows USB device recognition level, so I think we can isolate the problem source to the iPod firmware upgrade.
Seriously... my bet is on the extra power drain from the backlight being left on during USB connection...
Guess i'll have to stick with slow USB until Apple has a new firmware...
This latest upgrade is generating a lot of unhappy customers...... and the sad thing is, Apple did a bad job in backward compatibility and made it extremely difficult to downgrade to an older version of iTune / firmware.... Apple better get these fixed asap...

I just recently upgraded my itunes and now i am having problems turning on my ipod

So i recently upgraded my itunes, and my ipod was connected to it. Now my ipod wont turn on, and i just want it to return back to before the upgrade

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod Sync Error after Upgrading to iTunes 10 and ios5

Similar Messages

Maybe you are looking for