Ipod Sync problems - 60 gb video ipod

I'm using the newest version of itunes 7.02 on my computer and cannot sync my 60 gb ipod after the last ipod software sync. I'm using usb.
I can sync onto a different computer, but, of course, that doesn't have any of my songs...
Any ideas?
Dennis

What exactly happens when you connect your iPod to this computer, Dennis?
For example, is your iPod not being recognized in the iTunes Source List, or to the songs not transfer, although they appear to have synced to your iPod, etc?
-Kylene

Similar Messages

Strange audi sync problem & different, stranger video sync issu in sequence

I have two strange occurances with one particular set of media that was downloaded from the same original source mini-dv (recording in dvcam) tape. I have not found the same issue on any other footage.
1) when the media is imported into FCP, the audio is out of sync. it is slightly out at the beginning and then gets progressively worse.
2) when this footage is used in a sequence, the video that show in the sequence is not the same as the video that is exported when this sequence is exported as QT movie (or any other export option) Like the audio the video out of sync gets progressively worse.
- The original media is perfectly in sync looking at the digitized source ie: in Quicktime. There is no audio out of sync problem.
- the only difference I could see in the file was that this media is 3.5mb data rate whereas all the others are 3.6mb.
- other tapes from the same camera do not have a problem
- I do all my downloading from a firewire deck and not from the camera
- I upgraded from 6.0.1 to 6.0.4 (as did the QT 7.5 upgrade also) to see if that fixed the problem but to no avail.
Very perplexing. I managed to work around this problem in a sequence whos deadline was looming by manually slipping the footage in the sequence the required number of frames. This is where it also gets odd. I was able to do this by
- double click the clip in the sequence which then loaded that into the viewer.
- position the playhead at the beginning of the clip
- from the canvas select the go to position in master clip option which then loaded the masterclip into the viewer. the position in the masterclip was always the correct frame (ie the frame I expected to see as per my edit). The frame showing in the canvas was also the correct frame (but this would not be the case when exported)
- the next thing i did was to use the slip tool, as soon as i held the slip tool over the sequence clip, the frame in the canvas would be the wrong frame (the frame i would see when I exported).
- then i would just carefully slip the sequence clip back to the matching correct frame. So watching in the viewer, I would align the frame that showed in the viewer to the frame in the canvas.
When done the frame showing in my sequence would be a completely different frame but when exported, the frame that I expected to see would be the exported frame.
I could find no logic to the amount I needed to slip each time (I am sure there is logic but I couldnt figure out what that was). the clip at the end of the footage needed to be slipped -10:09, and this got progressively smaller to the clip at the beginning of footage needing to be slipped -:16
Hopefully that wasnt too confusing.

btw, i have tried recapturing the footage and i have offlined it, copied it to another location and onlined it in the new location to no avail. still have the sync and video in sequence issues.

Audio sync problem with sony video walkman input

i purchased a sony video walkman to ingest mini dv into fce1, using a 1ghz g4 imac with os 10.3.9. 256mb of ram. i made the purchase to overcome the same sync problem i had when ingesting long clips directly from a canon xl-1.
i'm connected with firewire. audio is 16 bit (shot on an xl-1) and i've checked and rechecked the preferences and other relevant settings.
i'm buffaloed at this point: how can i capture longer clips without a loss of sync?
could the problem still be related to having shot the material on an xl-1? could it be related to only having 256mb of ram?
imac g4 1ghz 256mb Mac OS X (10.3.9)

yes, i have...i've also deleted fce preferences files as well. i'm wondering if reinstalling the program will help this situation?
imac g4 1ghz 256mb Mac OS X (10.3.9)

Sync problem when recapturing video

I am using FCP 5 (with all Software Updates) and when I capture from PAL DVCAM using my Sony PD170, all is fine. Sync is perfect.
Recording finished projects back to DVCAM tape is also fine. I can play the projects on the tape and they are in perfect sync.
But: if I recapture a mastered project back from tape, it is always out of sync, by at least a couple of seconds. Even though as it captures it appears to be in perfect sync.
I didn't always have this problem, I am not sure how or when it started.

It should be sufficient - I have also tried recapturing from the middle of several-minute long mastered files, and anything I capture is always out of sync. It is odd. There must perhaps be something amiss with the Record To Tape, though it seems fine when I do it, and as mentioned, it plays in perfect sync on the camera when viewed on the LCD.

HT1338 When will Apple fix the sound sync problem in PhotoBooth video?

Suggestions online are
(1) reboot with cmd/opt/p/r This is not a solution but a temporary fix, a sign that Mountain Lion is not working well!
(2) reset the sound config in Audio settings. This works briefly, again a temporary fix.
Isn't it time that Mountain Lion was working?

so that means.. from itunes..or not from itunes?
sounds like 3rd party music then..
SO i would delete them from the itunes library and re add them to the itunes library.
TO test this out you should delete ONE SONG or ONE ALBUM and test that ONE SONG or ONE ALBUM only to see if they sync to the device..
are you using a windows or mac? Updated itunes?
need details on the Configuration...

I am having "downloading safari safe browsing data" syncing problem !

I am having "downloading safari safe browsing data" syncing problem ! My videos and music erased off from my new generation Ipad with IOS7 and I can restore them back from my itunes? I am using Win7. How can I get rid of this problem ?

Hi ...
This is the Safari for OS X community.
Best to post your topic in the iTunes for Windows community > iTunes for Windows: iTunes: Apple Support Communities

Audio sync problem with videos imported from iPod Touch

I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

Premiere cannot handle clips with variable framerate.
Your converted clips need to have constant framerate.
Otherwise use a converter like Handbrake.

I am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

i am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

I assume there is more than ample space remaining on your iPod to hold all the videos? Are you getting any error messages during the sync process?
Do all of these videos play okay in iTunes? Is the sync only checked songs and videos option enabled from under the iPod's Summary tab?
What other setting do you have enabled from under the iPod's video configuration tab in iTunes?
B-rock

IPod Classic 160gb Video sync problem

My iPod Classic will only sync certain video files, files around 2gb or smaller. I have Quite a few digital copies and I would like to be able to synch all of them at one point or another. I have a few video files that are around 4gb and when dragged to the sync que it drops into the device, starts to sync, syncs without transferring the video file, and says sync complete without error message.
I also have digital copies of Game of Thrones that I would like to load on to there but they do the same thing. I have tried in the general sync settings to allow the choose your files option as well as the general sync all options with no previal. Its like the iPod will not sync any of the television shows at all. not even a special feature episode.
I have iTunes version 11.1.4.62 with iPod system version 2.0.4 running on a windows 7 laptop. Any help would be appreciated. Thank you in advance for your helpful comments.

http://docs.info.apple.com/article.html?artnum=302828
http://docs.info.apple.com/article.html?artnum=302758#11

Having syncing problems after installing iPhone OS 2.0 for the iPod Touch

Ok, after finally installing the software on my iPod Touch 2nd Gen, I tried to sync it, and it only syncs my pix and apps. It will not sync my music nor videos. It read " an unknown error has occured. (error 13019).
Has anyone else expericned this problem. It's starting to make me regret buying the upgrad software, specially since the iPhone and iTouch is basiclly the same thing. Donnt get me wrong it has the other features but I cant do the things that I orgianlly bought the Touch for.

Yes, I didnt unclick anything and and everything stayed the same since before the upgrade. I tried everything. And still nothing works!!!!

2014 Sync problems on iPod classic / Please help!! 2014

Hello community!
I really need some help with this problem I am having... I have done some research for the past few days on my own but nothing I have found has helped.
First some specs on my device...
iPod Classic: 80 GB (I believe this is iPod with video, assumed on the fact that it supports movie syncs)
iPod software version: 1.1.2 (up to date according to iTunes)
Formatted for Windows
Syncing to Dell Inspiron with Windows 7
iTunes updated to current version (11.4)
I had much mof my music library uploaded onto my iPod for quite sometime. (close to 14,000 songs synced at 192 kbps) I often like to put my iPod on shuffle and just listen to whatever comes on, but here and there I will skip songs until something I am in the mood for comes on... I began to notice that my iPod was freezing (ON THE DISPLAY ONLY!!! Playback through speakers continued) when I would skip through songs... Once the screen dimmed however, I could once again skip to the next song. I figured this was a problem concerning corrupted files or something similar. These are the steps I took..
1.) Updated iTunes to version 11.4 and checked for further updates
2.) ATTEMPTED to check disk within Windows (was unsuccessful and heard the iPod making a lot of 'clicking' noises from within the casing)
3.) Performed an iPod restore within iTunes
4.) Performed a check disk within Windows and recovered any bad sectors (SUCCESSFUL)
5.) Selected 'Music' sync and the option for 'Entire music library'
6.) UNCHECKED 'Include music videos'
7.) Reconfigured settings as they were before and made slight changes..
     a.) Checked 'Open iTunes when this iPod is connected'
     b.) Checked 'Sync only checked songs and videos'
     c.) Checked 'Convert higher bit rate songs to '192 kbps' AAC'
     d.) Unchecked 'Manually manage music and videos'
     e.) Unchecked 'Enable disk use'
8.) Began a sync on my iPod... With well over 10,000 songs I knew this was going to be a lengthy process.. I left computer unattended..
When I returned to my computer, iTunes was unresponsive... The only way I could get iTunes to show was to minimize a Window on top of iTunes. iTunes states 'Syncing iPod... Do not disconnect' but does not show a rolling progress bar.. I cannot cancel sync, I cannot eject iPod, I cannot close iTunes...
I attempt to eject iPod device through windows, UNSUCCESSFUL (Cannot unmount generic volume while the device is in use)
I 'Ctrl+Alt+Dlt' to Task Manager and End Program 'iTunes' UNSUCCESSFUL..
I End Process 'iTunes.exe *32' and eject iPod through Windows SUCCESSFUL
When the iPod displayed 'OK to disconnect with load bar, I disconnected the device.
As soon as this bar was full iPod IMMEDIATELY rebooted completely and powered back up with only 20 songs synced. (Frustration ensues)
Confused and thinking maybe my screen saver caused an interruption during the sync, I changed screen saver and power saving options to eliminate any possible interruption, REPEATED STEPS 3-8 ABOVE, and started sync again.. Left computer unattended
Again, coming back to computer much later, iTunes was in the same unresponsive state. Closed iTunes and began looking for answers on the internet. Any and all answers I found stated I should restore iPod, update iTunes, run diagnostics tests, etc., etc...
All of which I had done EXCEPT for running a diagnostics test..
Running a diagnostics test: I ran only the tests concerned with 'Device Connectivity' and 'Device sync' tests.. Here are the very interesting results I yielded from these tests...
Device Connectivity Test:
Support services:
     'iPod support service is running.' Status: GREEN
     'iTunes Helper is running.' Status: GREEN
     'Apple Mobile Device is running.' Status: GREEN
Ports:
     'USB ports verified.' Status: GREEN
     'No FireWire (IEEE 1394) ports found.' Status: GREEN
     'iPod found.' Status GREEN
ALL TESTS PASSED
Device Sync Tests
Results:
     No iPod touch, iPhone, or iPad found. Status: RED
ONE OR MORE TESTS FAILED
I am at a loss, I realize that Apple has discontinued the iPod Classic but does that mean iTunes will no longer support these devices!?
And if ANYONE has ANY suggestions for possible steps I can take to regain syncing privileges to my iPod once again, please let me know!
Also, I have diagnostics test results saved on my desktop and available to post if required!
Thank you for any and all help!
-Chris

!UPDATE!
I made several adjustments to my sync options and made some progress and am now trying to sync in 'stages' as I like to think of them.
Here is what I did:
1.) Under 'Music' tab in 'My iPod' options I opted to sync 'Selected playlists, artists, albums, and genres'
2.) Selected a small portion of tunes I know I want on my iPod (ended up being close to 3,500 songs.
3.) Under 'Summary' tab I unchecked the 'Sync only checked songs and videos' box
4.) Unchecked 'Convert higher bit rate songs to ___ AAC'
5.) Checked 'Enable disk use'
6.) Ran a SUCCESSFUL sync!
I am now running a sync keeping the same adjustments in place and have added 6,556 songs. (SYNC IN PROGRESS)
I am wondering if trying to convert that many songs to a lower bit rate is causing sync problems and it appears as if I am at least making progress on this. HOWEVER, I really prefer to decrease the bit rate on my songs so I may fit more on my iPod... Usually most of the files I have in iTunes are at 320 kbps with a select few at 192 kbps. I would like to make everything the way it was before my first iPod restore.. 192 kbps, but this also seems to be the cause of the sync problems I am having? Anyone else have a comment on this?
Thanks again
-Chris

Solution to my "iPhone/iPod cannot be synced" problem

My MacBook Pro has been giving me the following error when syncing both my 80Gb video iPod and my iPhone for a while now:
The iPhone|iPod "..." cannot be synced. The disk
could not be read from or written to.
I worked around it on the iPod by not syncing any podcasts but I wasn't so lucky (if you can call it that) with the iPhone - I couldn't sync iPhoto at all.
After one visit to the Genius Bar on Fifth Avenue and a further 18 hours of trying different things, I fixed the problem. It seems to have been some kind of file corruption in the iPhoto library. This procedure worked for me:
1. Move my iPhoto Library folder to the desktop
2. Open iPhoto and let it recreate its folder and default files
3. Copy my backed up picture folders to the folder iPhoto created
4. Copy the backed up AlbumData.xml file to the folder iPhoto created
5. Overwrite all files created by iPhoto in the new folder with my backed up ones
I don't know where the corruption was but the above sequence fixed my problem. The Genius Bar advice was to create a new user account on my Mac and then copy or move all my data files to the new account. That was painful, time-consuming and ultimately it didn't work. I don't think this is good advice to be giving anyone but hardcore computer users.
MacBook Pro Mac OS X (10.4.10)

The sync issue I found with photos (and it was strictly hit or miss as the error message details nothing) is that I had to break them up into smaller folders of roughly 200 photos or less. A large folder will cause any number of sync errors.
The list of elaborate workarounds for basic functionality in every application is beginning to get on my nerves. The only thing I haven't been told so far is to jump up and down while singing Yankee Doodle Dandy if I want this thing to do what it's supposed to.

When I sync up my HD videos won't transfer onto my IPOD- Why? How can I fix this?

I have an IPod Classic... I'm trying to sync up my HD videos- tv shows but they won't transfer onto my IPOD. Anyone know why?

Ok so HD video is not supported, which explains the problem so what is the solution? Do I have to put it through a converter to make the data and bit rate smaller? Would that even be possible?

How can I sync my IPOD Nano 4 to iTunes on my PC? I've already tried the sync button on iTunes and it says it is synced. I've also tried the 5 steps recommended by Apple to fix sync problems with no luck.

How can I sync my ipod nano 4 to iTunes on my PC? I've tried the sync botton on iTunes and the 5 steps recommended by Apple to correct sync problems with no luck.

How is your iPod configured to sync content from your iTunes library? Any error messages during the sync process?
You may want to reset warnings on the device by right->clicking on it under Devices and choosing Reset Warnings. Then resync the iPod to see if any alerts appear.
Is this the same computer you normally sync the Nano with?
B-rock

Ipod syncing problems...?

Im having several ipod syncing problems. I have an Ipod touch, 4th gen with the standard USB cable that comes with to charge it and sync it with. Today, i plugged it into my computer like normal to sync some new songs onto it from itunes. But, it started acting up. First, it kept syncing on and off, and the sync sound wouldnt stop- it wouldnt stay synced. then, later, when it finally did, not long after it said "this device does not support charging," and itunes didnt recognize my ipod anymore, so i couldnt sync my songs. is there any way i can fix this? thanks in advance.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Ipod Sync problems - 60 gb video ipod

Similar Messages

Maybe you are looking for