Ipod syncs podcasts, but nothing else.

I'm hoping I'm not the only one with this problem, but see, what happens is I'll connect my iPod and it'll show up under Sources in iTunes and everything will look fine, but the music won't sync. The podcasts will though. Does anyone know what I should do? Thanks in advance.

Thanks for this. I also found out that all I needed to do was right click on the device and select download purchases! I new I was being dense......thanks again.

Similar Messages

I'm sure I'm being a bit dense here but I cannot seem to transfer music of shows I have downloaded onto my iPad with my library.......it syncs app but nothing else! Help please?

I'm sure I'm being a bit dense here but I cannot seem to transfer music of shows I have downloaded onto my iPad with my library.......it syncs app but nothing else! Help please?

Thanks for this. I also found out that all I needed to do was right click on the device and select download purchases! I new I was being dense......thanks again.

HOW DO I NO IF MY COMPUTER IS RECONISING MY IPOD I PLUG IT IN THE IPOD TURNS ON BUT NOTHING ELSE HAPPENS

PLEASE HELP ME

iOS: Device not recognized in iTunes for Windows
iOS: Device not recognized in iTunes for Mac OS X
Typing in all caps indicates shouting, is considered rude, and is difficult toread. Many will not read such posts.
Please turn off your caps lock

I originally set up my iTunes account on my computer at work, now that I got a home computer and authorized it, i have not been able to sync my apps from my iTouch to my home coumpter, it transferrred my music but nothing else. What am I doing wrong?

I originally set up my iTunes account on my computer at work, now that I have a home computer and authorized it, i have not been able to sync my apps from my iTouch to my home coumpter, it transferrred my music but nothing else. What am I doing wrong?

Hello John,
It sounds like your music was copied from your iPod Touch but not your installed apps. I want to recommend this article to help you Transfer your Purchases named:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
You can also download your apps using your purchased history in iTunes with this article:
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
Click iTunes Store near the top of the iTunes window.
Click the Purchased link at the right of the iTunes Store homepage (below Quick Links).
In the page that appears, select a category.iTunes shows you which of your purchases are available for download. You can view all of your past purchases, or just the ones not currently in your iTunes library. Items already in your library aren’t available for download.If you select Music, you can view your purchases by song, artist, or album. If you’re viewing by album, click an album to see which songs on it are available for downloading.To search for an item, type its name or a keyword in the search field, and then press the Return key to view your search results.
To download an item, click its Download button .To download all available items, click Download All.
Thank you for using Apple Support Communities.
All the best,
Sterling

When I click on "App Store", the loader gets stuck on "Contacting iTunes Store..." I can click on the "iPod Click Wheel Games" and it works, but NOTHING else.

I can click on the "iPod Click Wheel Games" and it works, but NOTHING else. Any suggestions?

I was having this problem. The settings on my wireless router was set to hide my IP address so it wouldn't connect. When I changed that, I connected no problem. While this is annoying since I don't want my IP address to be out there, I just switch my router when I need to connect to the App/iTunes Store. Hope this helps. It worked for me.

My first gen 3g iphone photos are not recognised by camera wizard - it sees the phone but nothing else no files - it is not locked - ?

I have a new 4g Iphone - Telstra (Australia) disabled my old 3g and enabled the 4g so the 3g is just enabled to show contacts and photos etc.
I want to download my photos and contacts from the 3g. trouble is that my internet is dial up only at home and impossible to use as too slow.
So my itunes is now out of date (not current module 10.5 + etc.) and the 3g phone is also not operating on the latest ios.
BUT the itunes does sync the phone - but it seems to only sync from computer to phone - so my camera roll on the 3g is not on my computer - therein lies the dilemma - I don't know how to download the photos. I cannot update the ios on the 3g and it seems that might be reqired to "back up"
So first question is how do I back up (not sync) my 3g to itunes.
Do I need to updates its ios first and update iteuns first (in which case thats impossible)
So what else could I do.
It seems the other thing is that even if I could back up the 3g the Itunes won't recognise the 4g as the 4g is ios 4 or something and the itunes is not up to date.
SO I thought I should just use camera wizard or a photo package like iphoto or kodak easy share.
But with camera wizard my computer recognises the 3g phone BUT nothing else. It is greyed out for options, and ini Windoes Explorer it shows it as a camera but when you right click it has no "properties" - and no files show up at all...
it is like it seems the camera and then nothing else.
THE CAMERA is not locked.
WHAT shoudl I do?

also - when I use camera wizard it just tells me the phone is busy or in use and I should retry.
If I use it through windoes explorer - it shows me the camera to computer symbols and a line moving between then but bombs out saying camera is busy.

I need to restore my ipad. Itunes states that its waiting on my ipad, but nothing else happens. What should I do?

I was syncing my ipad yesterday and everything froze up. Now it tells me I need to restore the ipad. When I try restoring, itunes says its waiting on the ipad, but nothing else happens. What should I do?

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

When I turn it on the apple appears but nothing else happens??

I have Ipod touch when I turn it on the apple appears but nothing else goes on help??

What happens if you try a hard reset? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If its still stuck at the Apple logo, try connecting it to your iTunes library in recovery mode and restoring it.
http://support.apple.com/kb/ht1808
B-rock

If the wifi on my iPod Touch is on nothing else on the router will connect to the internet

Ever since I updated my iPod Touch 4th Gen to iOS 6, If the wifi on my iPod Touch is on nothing else on the router will connect to the internet..
It's the weirdest thing.
My Wired and WiFi computers are experiencing DNS errors, unresolved URLs and in general having difficulty connecting to the internet...
That is.... UNTIL I SHUT OFF THE WIFI ON MYiPOD 4th Gen TOUCH!!!
Then everything works fine.
I've reset my router, several times.
I've reset my Cable Moden, several times.
The problem persists until I disable the WiFi on my iPod

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.

thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

ACE 4710: Possible to allow a user to clear counters but nothing else?

Hello all,
Using an ACE 4710 we have a user setup with the Network-Monitor role which allows the user to view config, interface status, etc. We would also like to allow this user to clear the interface error counters as well, but nothing else. Is this possible?
Thanks!

Hello Brandon-
Network-Monitor only lets you browse outputs, it is a not a role that allows a user to make any changes including clearing stats. You can create custom roles and domains to get closer to what you want, but you cannot zero in on a single command like that.
i.e.
ACE# conif t
ACE(config)# role MyRole
ACE(config-role)# rule 1 permit modify feature ?
AAA             AAA related commands
access-list     ACL related commands
connection      TCP/UDP related commands
fault-tolerant Fault tolerance related commands
inspect         Appln inspection related commands
interface       Interface related commands
loadbalance     Loadbalancing policy and class commands
pki             PKI related commands
probe           Health probe related commands
rserver         Real server related commands
serverfarm      Serverfarm related commands
ssl             SSL related commands
sticky          Sticky related commands
vip             Virtual server related commands
You can create a permit or deny rule, within that, create/debug/modify/monitor each feature seperately.
Domains allow you to create containers for objects. You can place specific rservers, serverfarms, etc. into it - then apply it to a role so that the user assigned to it can only touch those objects.
Regards,
Chris Higgins

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

I can print a test page from my Mac to my HP Officejet Pro 8600 but nothing else will print

Hi - I just recently had a hard drive crash and had to revert to an old Time Machine backup on my new hard drive to get my Mac back. Since getting back up and running I have been unable to get my Officejet Pro 8600 back online. My computer is wired to the wireless router but the printer is running wireless. My computer can see the printer just fine and I can even print a "Print Quality Diagnostic" report from my Mac to the printer from the HP utility. But nothing else will print. The firmware is up to date. I have tried resetting the printing system multiple times, rebooting the machine, etc... Nothing works. Any help would be appreciated.
If it helps, we were using a different printer the last time the time machine was backed up, so when we used that backup the old printer was showing, but I reset the printing system, so it shouldn't matter.
Thanks for your help!

Hello @Ryan221,
Welcome to the HP Support Forums! I see your hard drive recently crashed and now you are not longer able to print to your HP Officejet Pro 8600. I see you have reset the printing system with no success. Let's try a different approach:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
I hope this helps, please let me know the outcome!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?

After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?

Hello,
See if it'll Safe Boot from the HD, (holding Shift key down at bootup).

Ipod syncs podcasts, but nothing else.

Similar Messages

Maybe you are looking for