Ipod to powerpc Mac Mini not connecting..

I just found an older ipod i've had for a while and went to hook it up to my Mac Mini and my computer didn't recognize it and for the record the ipod has been restored to factory settings and there is nothing on it. The ipod is getting power as it's charging, but my computer won't recognize it and won't show up in my dock, in itunes, etc., and i basically can't use it. I'm hooking it up through the usb.
I hooked it up to my friends non-mac windows laptop, and it recognized it instantly without any problems.
Any ideas? Thanks

"Figured it out" isn't helpful when you don't say how you fixed the problem. I had the same issue, came here looking for an answer. After reading your (unhelpful) answer I also figured it out: For posterity, I am including details of what worked for me.
Simple, really: Reset the iPod. Hold down Menu+Center button until the Apple logo appears, then reconnect it to the Mini once it displays the main screen again. The Mini should see the iPod at this point, without loss of any data on the device.

Similar Messages

  • Mac Mini not connecting to internet

    Hi,
    I have a Mac Mini Intel Core 2 Duo that I use with my TV. It has 2 GB of ram. And it's running 10.6.8,
    I have a time capsule that all my devices use to connect to the internet. All of them are working (Macbook Air, iPhones, iPad...).
    The Mini is conncected to the time capsules network but will not load an internet page.  I have turned off my routers, unplugged all connections, waited a bit and then restarted everything. Nothing seems to be working.
    Any ideas?
    Thank you!

    The network address is probably not shown but the subset mask should be the same as the the Air and the default gateway is probably labeled as router.
    You say the Air is connected to WiFi which I presume is your router were as the Mini is connected to the airport.
    Does the Mini work if you select to connect to WiFi instead of Airport?
    I am guessing on how your network is setup.
    1. You have a router that connects to the internet and includes WiFi.
    2. The TC connects by Ethernet to the Router and also provides a WifI signal labelled Airport.
    3. Your TC is in Bridge mode for its network.
    If this is not how you have it set up could you clarify.

  • Mac Mini not connecting at all to TV via HDMI

    I have my 2012 Mac Mini plugged in to a SAMSUNG TV with an HDMI cable. It was working fine when I left work Thursday - I am trying to get it to connect today and it will not pick up the signal. Any help or troubleshooting ideas?

    1. Check the TV menu to besure that nothing has changed.
    2. Try a new or different HDMI cable.
    3. Reset the > NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then if those do not solve the problem, contact Apple Support or your local AASP and have it check out.
    Apple - Support and Service Options

  • Mac mini not connecting thru yamaha receiver

    Hi, first time Mac user and first time poster here!
    I unboxed my Mac mini today and first connected it via hdmi to my yamaha a/v receiver (RX-V667). This is how my tv and Blu Ray are connected as well, and then I have one single hdmi output to my tv.
    there was no display on my tv. If I connect the Mac directly to the tv, then it works. The yamaha handles everything else fine (Oppo blu Ray, direct tv cable box, Xbox 360) but not the Mac. Why would this be?
    ANy help is greatly appreciated.  I'd like to avoid running 2 inputs into my tv
    thanks!

    I am using a Yamaha RX-V467 in a similar manner and it works just fine.
    My connection to the Mini is HDMI->HDMI.  FWIW, mine is a 2011 Mini Server
    running Yosemite (previously was a 2010 Mini connected identically with no issues).
    The cables could be an an issue.
    Also, you may want to try a PRAM reset (OS X Yosemite: Reset your computer’s PRAM)
    or an SMC reset (Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support).

  • Mac Mini not connecting to Wi Fi network - 10.5.5?

    My Mac Mini won't connect to my wirelss network - although my iPhone, iMac and laptop are fine. It used to, but suddenly not any more. Is this related to the 10.5.5 update? I'm having a stab at trying to fix the Time Machine "can't get MAC address" bug, and thought I'd switch from wired to wireless to see if it made any difference, but I can't. Anyone any ideas?

    It did briefly once, but now Airport just says "scanning" all the time. I'm plugged in via ethernet usually which continues to work fine. My wireless network is also visible and working fine to my 2 iMacs, iPhone and (non Apple) laptop. No error messages, just can't see the wireless network. The network has WEP security. I tried switching it off but that didn't make any difference.

  • Mac Mini not connecting to Network

    Hello,
    My mac mini does not connect to the network. I have DSL modem, connected to an Airport Express. The light on the Airport Express is green, but it just is connecting. I've tried everything but I cannot get it to connect.
    Please Help!!
    mac mini   Mac OS X (10.4.2)  

    Reset the airport not just press the reset button, but hold it down for about 5 seconds.

  • I intend to purchase a Mac Mini and connect to a regular (not smart) flat screen TV and use such as monitor. Can this setup also allow access to Netflix or Apple movies or an Apple TV is also required?

    I intend to purchase a Mac Mini and connect to a regular (not Smart) flat screen TV that will be as such a large monitor. With this setup do I require an additional Apple TV to watch programs from Netflix, Apple Store movies, Y-tube etc?

    You can view NetFlix and YouTube via their websites on a Mac computer. You can purchase/play iTunes movies and other thing via iTunes on the Mac.

  • HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
    also
    Finder icon on dock, macintosh hd,
    Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    delete file & restart sleep to test.

  • Itunes / mac mini not seeing ipod

    When I plug my ipod into the mac mini (usb) my mac doesn't recognize or see it. That means I can't update any songs on my ipod from my itunes library. I've tried:
    - resetting the ipod,
    - uninstalling and reinstalling itunes,
    - plugging the ipod directing into the usb port on the mini base and the monitor usb port,
    - putting the ipod in disk mode and
    Still my mac does not see the ipod.
    Upgraded to iTunes 7.2 a few weeks ago. It's been working fine the last couple of weeks.
    Please - help!!!

    All I can think of:
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • IPod Touch 4 with iOS5 not connecting to Yahoo Mail

    After downloading iOS5 on my iPod Touch 4 I could not connect to my Yahoo Mail.
    Read many suggestions and called Apple tech support. The tech tried to access Yahoo Mail and he had the same problem I did.
    BUT... I fixed it on my own by process of elmination.
    Go to...
    Settings
    Safari
    Turn off Private Browsing ( this might be all you need to do)
    then...
    Scroll down to Advanced
    Turn on Debug Console ( I'm not sure this step is necessary)
    Change your Yahoo email password on your Mac or PC
    Restart your iPod Touch
    Try logging into yahoo mail from yahoo.com using your new password.
    I think turning private browsing was the problem and I think it was added in iOS5.
    I hope this saves all of you some aggravation. I spent 2 days trying to  fix.

    Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    iOS: Device not recognized in iTunes for Mac OS X
    Try on another computer

  • Problem with mac mini 2012 connection

    Hello!I have a problem with my mac mini 2012 connection!The hdmi to hdmi connection working great at my mac mini!The thunderbolt(mac mini) to hdmi (display) is not working!But when i have the hdmi to hdmi cable and the thunderbolt to hdmi at the same time (my display have two hdmi output) works fine!!But when i unplug the hdmi to hdmi cable stop working the thunderbolt to hdmi!!Any solution for that??I want only the thunderbolt to hdmi connection!!

    Whew, never heard of this problem yet!?
    Is it possible the TB->HDMI is set to mirror the HDMI->HDMI screen?

  • Can mac mini work connected to imac desktop

    can mac mini work connected to imac desktop. I know its silly question but can i make the mac mini main operating system on my imac after transferring all of my itunes etc?

    What is Target Display mode?
    But only 27" iMac (Late 2009 or Mid 2010) can do this.
    Since you mentioned an Early 2009 iMac I assume that it is a 24" iMac which sadly has not this capability.
    If I am correct, you might wanna have a look at ScreenRecycler http://www.screenrecycler.com/ScreenRecycler.html
    Stefan

  • What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi.

    What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi?

    If the Mac use Lion (10.7) you can use Airdrop for that.
    With Mac's not using Lion you may set up a computer to computer (ad hoc) connection.
    How to --> http://docs.info.apple.com/article.html?path=Mac/10.6/en/8339.html
    Lupunus

  • PowerPC Mac Mini gets stuck at grey apple logo screen, wont start

    I have a bit of a problem and would appreciate some help, im not especially good at this stuff.
    My Powerpc Mac Mini froze up recently, having left it on for a few days without shutting down/resetting. I impatiently turned it off with the power button at the back. When I turned it on again, it only got as far as the grey apple logo screen, it now refuses to go past this screen despite numerous power resets, and unplugging at the power.
    I have reset the PMU and the PRAM as suggested by the troubleshooting, to no avail - the PRAM did work as it changed the resolution of the apple logo, but still got stuck at the grey startup screen. Its out of warranty so I have to pay for technical support. Can anyone help?
    Message was edited by: misternuge

    If you have the original install disk that came with your mini, the first thing to do is to insert that, and then boot the system holding the C key down. This should force it to boot from the install disk rather than the internal drive. The reason you want to do this is two-fold: firstly that if it boots OK that way, it shows the basic hardware is OK, and secondly, it's possible that the hard drive has developed errors (likely directory damage) and the tool to check for that and attempt to resolve it is on the install disk.
    Once you've got the system booted to the install disk, exit the installer and run the Disk Utility application. That should display the internal drive (and the install disk) on the left. Select the internal drive and then click 'Repair Disk'. If no errors are found, the drive is fine and the problem lies elsewhere. If errors are reported and the disk is fixed, then you should be able to reboot normally afterwards. If errors are found and Disk Utility reports 'error on exit' not having fixed them, then run it again just to be sure, but otherwise it means the drive is damaged sufficiently that Disk Utility can't fix it. A third-party application such as Alsoft's DiskWarrior will then be needed if you want to try and fix the drive and recover data, or you can simply elect to do an erase and install, meaning the drive will be reformatted and a new copy of MacOS installed. Do not do this if you have data you need to get off the drive!!

  • Mac-Mini wont connect to wired ethernet

    I can not get my Mac-Mini to connect to the internet via a wired ethernet cable. When I try to connect it says it is getting an IP address and then boots out and tries again. Its a never ending cycle. It does this in both OS X, and Windows. Do I have a bum network card?

    Hi Steve,
    Some ISPs can be fussy about the number of devices you connect to the internet.
    If the Modem routes then it tends to be this network card that is in effect "registered" with the ISP.
    If you have a cable modem then a Router then the router tends to be the device "registered".
    If no router then that is obviously you computer's MAC address.
    Some ISPs will go as far as requesting to actually type in the MAC card address and formally request to change it.
    It sounds like you have here a system of monitoring that is not that "up front" and causes problems enough for people to have several computers and just swap them.
    I would guess it allows one change, like you would need if you have a new computer.
    12:44 PM Wednesday; June 27, 2007

Maybe you are looking for

  • Form Server Render Form QPAC problem

    Hi, I'm still having problem with FSRF QPAC, can someone tell what setting i should use for "Adobe LiveCycle Forms Settings -> Locations" and FSRF QPAC Input tab. I have standard turnkey installation of Workflow, Forms and Form Manager. For now i got

  • PO taxes display in output

    Hi, I want to display Purchse Order Invoice Tax in output script. can anybody know which  parameter pass in "CALCULATE_TAX_ITEM" plz help me with example if possible...

  • Anyone tried updating to quicktime pro using OS 10.4.11?

    I'm running OS 10.4.11 on a G5 PPC and I want to upgrade my version of QuickTime Player 7.6.4 to QT 7 pro. According to Apple's web site, I must have at least OS 10.5 to upgrade. Is that actually a fact? Just wondered if anyone has successfully tried

  • Error 147:20 - Adobe

    I recently received this error message after downloading the standard Adobe CS4 for windows trail from here at adobe.com. The installation completes and after launching CS4 I receive this message. "This product has has encountered a problem which req

  • Credit Limit warning message?

    Hi All The credit limit is enabled for the customers and the system is giving warning messages wherever the credit limit is deviated.  The same warning message appears even though there is no credit limit is set for some customers?  why is this/ Than