IPod to TV using digital camera cable, doesn't work. Help

Hey
I've got the iPod 5th Generation 30Gb video. I ripped one of my DVDs onto my computer and then used videora to convert the DVD for use on the ipod. I used iTunes to stick the movie on my iPod.
The movie plays fine on the ipod, but when I go to connect the iPod to my LG Flatron TV it doesn't work. I am using a cable that came with my digital camera, it only has one black and one yellow rca plug. If I use it with the camera, the black is for video, and the yellow for audio. But on the ipod, I don't get anything. I have checked that the send to TV settings are On.
I've tried changing the format on the output from PAL to NTSC, nothing.
One thing I am not sure about is why my cable has got a little box thingy surrounding part of the wire, inside the box thingy are magnets, anyone know why these are here? Could this be what is causing it not to work. What should I do?
Thanks

Here is some info for the pinout for the iPod.
http://www.anythingbutipod.com/archives/2006/04/zen-vision-m-video-cable-other-4 pole-35mm-pinouts.php
You need to find the pinout of the camera cable you have.
Probably be easier to get get an AV cable with a 3.5mm plug to (whatever fits into your TV) cable.
Usually, you simply have to swap the Red and the Yellow for it to work properly.

Similar Messages

After 2 weeks using ios5 camera roll doesn't work I can't see Photos inside

After updating my iPhone 4 to ios5 first I did was organize photos from the camera roll in differents folders. These folders disappears automaticly after some days and now everytime I try to see a photo from the camera roll or from the camera after take photo the app close and return to the main screen.

Your Camera Roll is corrupted. I don't know why or how, but if you can't delete any photos from it and it doesn't import photos via the cable about the only thing you can do is restore the phone.

Windows thinks my ipod touch is a digital camera. How do I change this so itunes can see it?

Windows thinks my ipod touch is a digital camera. How can I change the device in windows, so that i can re-register it as an ipod and itunes can connect with it.?

It is normal for the iPod to be seen as a camera since that is how one gets photo off the iPod. You can turn it off by:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP
To get iTunes to see you iPod see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
If you previoulys installed camera or scanner software that may be causing the problem.

Upgraded to iOS6 and now charging cable doesn't work

I just upgraded to iOS6 n my iPhone 4, and now my charging cable doesn't work. No...it's not an "official" Apple charger, but even the usb cable doesn't work when I plug it into my computer. If I plug my iPad charger into it, it works fine. How can the new operating system determine what kind of usb charging cable it "wants" to accept? This charger and cable worked flawlessly before the OS upgrade.

Same problem here. I use a wall charger and have had success by unplugging the charger from the wall, plugging the adapter into the iPhone, then plugging charger back into wall. Had the same problem with a car charger and got the phone to charge using the same procedure. I'd love to know if this works for you. Good luck!

If my charging cable doesn't work do i get a new for free

if my charging cable doesn't work do i get a new for free

I had a lightning cable, that came with my iPhone 5s, that frayed and broke at the connector. I took the cable and phone into the Apple Store and they exchanged the cable for a new one with not a question asked. Good experience.
I think part of it is that the design of the Apple cables is quite flimsy especially at the connector and I think they see a lot of them fail.

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

HT5815 Got the OS X 10.8.5 supplemental update but my camera still doesn't work :(

Hi,
Before I even got the OS X Mountain Lion 10.8.5 update, my video for skype was not working. Facetime was not working as well, but photobooth did. After the update however, I get the message "There is no connected camera" for every application. I even got the supplemental update which was supposed to fix the camera problem but it still persists. Help, please!
Also, I'm not tech-savvy at all, so if you do have a solution, please try to explain in layman's terms, if possible
Thanks so much

There is a known issue with mid-2013 MacBook Air, OS X Mountain Lion (10.8.5). If your Mac is NOT a mid-2013 model, this issue does not apply.
According to Apple's technical support article entitled "MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update", Apple is investigating this issue.
In the meantime, a 10.8.5 workaround is at http://discussions.apple.com/thread/5306216?tstart=0
Before you applied the 10.8.5 update, (or if your MBA is NOT a mid-2013 model) you could have used the built-in iSight suggestions from http://support.apple.com/kb/HT2090 to troubleshoot your FaceTime HD camera problem(s). After getting the camera working in OS X 10.8.4, if you use a mid-2013 MBA, applying the 10.8.5 update and the workaround should have given proper camera functions.
However, at this point, try resetting the PMU/SMC using the directions for
"Resetting the SMC on portables with a battery you should not remove on your own"
from the HT2090 page reset instructions for MacBook and MacBook Pro before applying the workaround.
If your MBA is NOT a mid 2013 model, consider the other HT2090 suggestions, too.
If your camera still doesn't work, or if the above suggestions seem more complicated than you want to attempt, contact Apple, your Apple retailer, or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
Mac OSX 10.8.5

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

You can use any computer but your data will be lost if you have no backup.

I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

Hello everybody,
I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
Thanks in advance for your answer.
Yan

Hello Chris,
Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
Thanks for answering so fast.
Bye.
Yan

I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its annoying.

I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.

Hi...
Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund > Apple - Support - Mac App Store - Contact Support.
No guarantees.

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

Calendar sync via cable doesn't work with now I've updated to Maverick and ios7

Calendar sync via cable doesn't work now I've updated to Maverick and ios7.

I am sorry you are having this trouble.
Here is an article on troubleshooting calendar syncing with iCloud. See if the suggestions there are of help.
http://support.apple.com/kb/TS3999

My cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.

IPod to TV using digital camera cable, doesn't work. Help

Similar Messages

Maybe you are looking for