IPOD TOUCH 16 GB: Internal Speaker Not Working. Help!

I recently purchesed an iPod Touch, 16GB, not sure of the generation, off of someone on craiglist.com. I checked it out with the person there before paying, and everything worked fine. The only thing I didn't check was the speaker. (I had tried it with the headphones in.)
The speaker does not work at all. I tried resetting, restarting, updating (says that the software is current on itunes 3.1.3), and nothing still. It's set on speaker only (tried both setting also). When the headphones are in the volume slider, I can adjust it, but if I unplug them the slider completely disapperars and I can't adjust volume on speaker mode. Music, Apps, absolutely no sound on speaker setting. Help...please?

You can look up what gen you have at http://www.everymac.com/ultimate-mac-lookup/
I don't know what else to try for the speaker problem. The original touches don't have a speaker, but it sounds like yours does, it just doesn't work.

Similar Messages

  • Ipod touch 4G problem--internal speakers not working.

    Ipod 4g internal speakers failing after one month. Ipod was "rebooted" which helped for a few hours, then restored, which helped for about 1-2 hours, each time internal speakers worked for a while then stopped, Now rebooting useless, I suspect that restoring it again will allow internal speakers to work, but that takes 2-3 hours.
    We can use the earphones via the jack, but want to use the internal speakers.
    Have the latest operating system (version 4.3.2), and exclusively sync with itunes on Mac platform.  3 other ipod touches (3rd gen) in house work perfectly. The sound is on, bluetooth is not enabled (no bluetooth devices in home anyway and have never set it up on this ipod touch).
    Any ideas besides spending 3 hours restoring each time the internal speakers fail?  I have used air to blow out the earphone jack but that didn't help either. One application (line up 2) correctly indicates when the earphone jack is used and when it is not in use.
    Will be getting a call from apple tomorrow, I suspect that will need a new ipod touch 4g.

    you've exhausted all of the troubleshooting steps then it really needs to be replaced if it's still within the warranty.

  • Hiya, my ipod touch 4th generation cameras are not working.

    Hiya, my ipod touch 4th generation cameras are not working. I had the screen replaced about a month ago and it was working fine.  I woke up the other day and went on my camera and it had stopped working, it won't let me change from the front to back camera so i don't know what the problem  is: now all it shows when i go on the camera app is the shutter or a black screen. I have tried the advice people have said but it hasn't seemed to work. Any help would be appreciated!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    However, it other than Apple or an Apple Authorized Service Provider did the previous screen replacement , Apple will not help.
    For the future, saying that you tried the advice people have said, provides us with zero information as to what yu tried.

  • Why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

    why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPod touch 4th generation, home button not working at all, Help?

    IPod touch 4th Generation , home button not working at all, Help?

    - Try restoring your iPod to rule out a software problem.
    - The try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    iPad 2 home button fail: Apple Support Communities
    You can turn one Assistive Touch in Settings>General Accessibility to use the screen instead. See chapter 30 of the users guide
    iPod touch User Guide (For iOS 5.0 Software)
    If under warranty make an appointment at the Genius Bar of an Apple store.

  • Ipod Touch 1st Gen - Home button not working

    Ipod Touch 1st Gen - Home button not working. Warranty over. I want to replace it with a new one. Grateful if anybody helps me to locate apple's authorized service centers in New Delhi. Also please let me know how much would it cost. Thanks in advance.

    See:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    You can also go to Settings>General>Accessibility and turn on Assistive Touch It adds the Home button to the iPod's screen.
    Yes, if you get it fixes, the iPod will likely be erased. Apple will not repair your old iPod, they exchange it for a refurbished one and do not transfer data.

  • My ipod touch go of and will not work untill i plug it back in to a ac power

    my ipod touch go of and will not work untill i plug it back in to a ac power

    You likely have a hardware problem like a dead battery.  To rule out a software problem try the following in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • Yesterday my iPod touch's home button would not work and to day it is completely turned off and wont turn back on and it is fully charged and when i connect it to itoons it dosent reckinise it

    yesterday my iPod touch's home button would not work and to day it is completely turned off and wont turn back on and it is fully charged and when i connect it to itoons it dosent reckinise it

    Given the information supplied, it sounds very similar to what happened to my wife's 4.  Locked up...came back on with a blank (bluish) screen...could here emails and text coming through.  It would get very hot as well.  Our local apple store tried two times to rescue it, ultimately rendering it complete inoperable.  I'm sorry to say in our case we had to buy a refurb and trade in the phone for $150, which actually wasn't a bad deal.
    There could be other information I'm missing, but I would start with seeing if apple can restore your phone.  If they can't, then I'm pretty sure it's dead.

  • So i have the ipod touch 4thgen and the speaker stoped working right after i got it and i was dumb and didnt return it because it started to work. but now about a year in it only randomly works like one time every month. that lasts for 10min then stops?

    so i got a new ipod touch 4th generation and about three days after the internal speaker stopped working. i was dumb and didn't return it because it worked again for about a month and then stopped. and i was pass the 90 day return time. so i am screwed and now the speaker will work for about 10 minutes every two months so it isnt that handy to me. i know it isn't blown because it will randomly work and when it does i hope it doesn't turn off. i have seen allot of things about this and i think that it is a apple ipod think because allot of other people have this problem. so i think it is great that apple has made these products it is just sad that u pay 200$ for something that breaks after two months. i think they should do a free replacement for any product that has a malfunction because it isn't my fault it is broken and then they expect u to pay another 75$ so they can take it just to give u a refurbished one that will do the same thing.

    Walk it into the nearest Apple Store, politely describe your issue and see what they say there.

  • TS2634 After I updated my iPod touch with iOS6, it does not work with my Logitech docking station. Is this a problem with iOS6?

    Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware.

  • IPOD Touch 2n gen Internal Speaker Probelm!!!!!

    I bought my ipod touch 2nd gen about a month ago and its been about a week that the internal speakers are not working when i try to turn the volume up with the rocker it says that there are still head phones connected but there is no heads in it.

    Plug your headphones in and out a couple of times, it might be stuck in headphone mode. See if there is any debris inside the headphone port. If still no luck, see the next Apple store or talk to Apple support about a repair.

  • Ipod touch 5th gen tilt function not working

    Hi
    I recently got a replacement (from apple) for my Ipod Touch 5th Gen 64gb due to the home button being broken.  It is running the latest software which I believe is IOS 8.1.1
    Note - other than the broken button I had absolutely no issues with my old Ipod.
    When I received the Ipod only 3 days ago I did the normal process of restoring from back up etc but have noticed that the tilt function is not working. 
    I have tried all the obvious solution - first being checking portrait orientation isn't locked, then resetting the Ipod via holding down lock and home button and finally I have done a factory reset and still have had no luck with this issue.  Is there an easy fix to this or am I going to have to go back to the Apple store?
    Thanks

    If you successfully restored (went through all steps without error) to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar                             

  • Apple Wireless Mighty Mouse internal speaker not working !!!

    Recently I bought an used Wireless Mighty Mouse (first version with grey side buttons), the mouse is working perfectly minus the single little detail that I can not hear any clicking sound from the internal tiny speaker inside the mouse when I use the little scroll ball above the mouse or when I press the grey side buttons, is this normal or should I hear the clicking sound simulated by the internal speaker? is there a way to enable or disable the internal speaker by software? Maybe is disabled by default, I don't know. I really don't think the speaker could be damaged due to the rest of the mouse is working like a charm but maybe mine came without a speaker, could be? or maybe it got disconnected somehow. Any clues or ideas would be very helpful. Thanks !

    I know what a microswitch is, please look at these links, here are the proof there is (or maybe there was) a tiny speaker in some mighty mouse and wireless mighty mouse:
    http://arstechnica.com/uncategorized/2005/08/dissect/
    and this:
    https://discussions.apple.com/message/988965#988965
    and this:
    https://discussions.apple.com/message/1429358#1429358
    and this:
    http://www.youtube.com/watch?v=OOw04wTtlIo
    and this:
    http://macdailynews.com/2005/08/02/apples_new_mighty_mouse_provides_audio_feedba ck_for_clicking_and_scrolling/
    and I can keep giving you tens of links to proof you that actually there is (or maybe there was) a tiny speaker inside the mighty mouse and the wireless mighty mouse, If yours came without one it doesn't necessarily mean all came without one, right? That is why I asked you what version you have in order to figure out which ones does have the speaker and which one doesn't.

  • Sony VAIO Flip internal speaker not working why?

    Hi,
    First time posting, first time Sony laptop user. I've had this Sony VAIO Flip 15 - SVF15N17CXB, laptop for a few months now everything has been working fine. Til lately I been hearing static on my laptop when I played music or videos. I managed to look up some of the common problems and adjusted my audio options til I got it fixed, and it worked.
    Until now, where I can only hear from he left internal speaker on my laptop. It was working fine earlier, but now it seems to have given out. I don't know if I blew it out or maybe I messed up the settings. I've tried updating my driver it says I have he latest one. I've uninstalled the driver, reboot my system, and it automatically reinstalled it, but still nothing.
    I'm not sure if I need to get it repaired or etc. I would take it to the Sony store, but they permanently closed all their locations in Canada. Please help, it is greatly appreciated!
    Sincerely,
    Eddie

    Hi KeenEddie613,
    Welcome to Sony Community!
    Kindly follow the instructions here to troubleshoot the sound issue on your laptop. We need to isolate issue first to know if it's a hardware or software related issue.
    Thanks,
    Jen
    If my post answers your question, please mark it as "Accept as Solution"

  • 2nd gen ipod touch sleep/wake button will not work

    Like the title says, the sleep/wake button (top button) doesn't work on my 2nd gen ipod touch. In short, I can't put it into sleep mode (I have to wait the one minute), turn it off to save the battery, take screenshots, or even reset it (without iTunes, anyways).
    I don't have any guesses on why it's not working. It just stopped working one day. I don't see water damage (via the water damage detector in the earbud jack), and I don't think I dropped it in a way that would harm it (unless dropping it on carpet counts).
    I should also mention that randomly, one day after school, I was messing with it, and the button worked. I think the battery had died, and I managed to turn it on then. It worked for a few hours (I charged the battery), and then it went back to not working.
    The warranty's up (and I'm broke), so I can't repair it. I also want to point out that the problem started not long after the warranty expired. What, at this point, is my best option? Should I just save up for the newest model? Or would it be cheaper and more efficient to save up just enough for a repair? Any other options I should consider?
    Thanks in advance.

    As I said, you can move on to Restore. Backup everything then Restore as New. Restoring from backup would just copy whatever software issue you may have. But it sure looks more and more like a hardware problem. Take a close look at the button to see if perhaps some dirt particles are stuck there.
    You can also make an appointment with a Gnius at the nearest Apple store to have it diagnosed. Apple does not fix iPods, they just replace them with refurbished units, so it won't be cheap. Prices are here: http://www.apple.com/support/ipod/service/prices/
    You can Google for third part repair hops or do-it-yoursel kits.
    Good luck.

Maybe you are looking for

  • Authorization of alv report based on plants

    I have created a new alv report for sale order statement.The problem is which can be seen in all plants irespective of the user.Suppose our company has 5 palnt Plant 1100 to 1500 The problem is suppose a user he has only rights in a prticular plant b

  • Do your Home Work BEFORE you "upgrade" to snow leopard

    Here is my experience with this upgrade... I provide in hopes to prevent others from spending hours and hours with this upgrade... 1. First, I have 3 video cards in my MacPro. One is an ATI HD3780. Once I upgraded to Snow Leopard, my mac would not bo

  • CIN - Accounting entry

    Dear, Can any one give me, what are the accounting entries will create while doing cin related documents. i.e when i do migo, miro, excise invoice and return delviery, utilization... i.e which a/c makes dr/cr,. pls provide in detail...

  • Best way to lay out this scrapbook

    I need some advice about the best way to go about this. I have a client who basically want me to publish her scrapbook. It's full of all sorts of color and b/w photos, drawings, newspaper clippings, you name it. I was thinking I should scan each page

  • Dynamic hierarchy-level entering dashboard & drill-down

    Hi there, I have a requirement to create a report which, depending on the user that opens the report, needs to start at a specific level within an organisation hierarchy. Once the user has opened the report (which will be part of a dashboard), he sho