Ipod touch 16gb restore failed

Ipod touch restore failed and now when I turn it on I get a picture of a usb lead and itunes logo. WHen I connect to itunes it recognise the ipod but says there is no capacity, no software, no serial no. I've tried everything, holding the power and home buttons etc. Please help I'm desperate. Thams

Error 13 and 14: These errors are typically resolved by performing one of more of the steps listed below:
Perform USB isolation troubleshooting, including a different USB port directly on the computer.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock connector cable.
Eliminate third-party security software conflicts by following iTunes for Windows: Troubleshooting security software.
There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. If your default packet size is set incorrectly it can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
If you find an ASR error 1000 in the iPhone or iPod updater log file, that is an error decompressing and transferring the IPSW file that is downloaded during the restore. This error is frequently caused by third-party security software interference, a poor quality Internet connection resulting in a bad IPSW download, or a conflict on the USB bus
copied from: http://support.apple.com/kb/TS1275

Similar Messages

  • IPOD Touch Pwd restore fail?

    I have an IPOD touch a child changed the password on and promptly forgot the new password.
    I have been thru the Itunes restore process several times and it finally completed the download
    on the 3rd attempt. But we are still unable to access the actual IPod and set up a new password
    As I understand from the Apple IPOD website once the restore is complete (which  it completed on the 3rd attempt) I should be able to restore the
    IPOD to install a new password.
    Any suggestions are appreciated with help restoring and recovering a lost password via the restore process.

    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Ipod touch 5g restore failed

    I wanted to restore my device then I cancel it. When push the top button to unlock my device 'restore failed' appears. I tried to push both home and top button  but my home button doesnt work so I tried it with accesibility button but it doesnt work. How can I manage this?

    Try:                           
    - iOS: Not responding or does not turn on
    when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod Touch 16GB won't charge up more than 50%!?

    Well I just bought my iPod Touch 16GB this past Sunday at a Best Buy here in Austin Texas and everything seems to work fine for me EXCEPT I cannot charge the device more than 50%. The battery icon will show up but will never show more than a 50% charge! I have WiFi turned off and the iPodT is connected to one of the USB ports on the back of my Alum iMac and was left there for several hours - with the computer left on! I even had it connected to a Dell machine at work for several hours via USB, no luck there either. I do not have an Apple AC adapter so I can charge it from a power outlet but should that really make a difference and give me a full charge? I guess I should make it known that the iPod's battery was dead when I first opened it but it seemed like it took too many hours to charge halfway. It looks like I may need to take it back. I wonder if Apple will exchange it out as long as I have all my stuff as well as the receipt from BB.
    Anyone else having the same problem or are able to fully rechrage their iPodT? Any advise or ideas is appreciated.

    Yes, when I press the sleep/wake button down for a few seconds I have the option to turn off the iPod. When I turn it back on and the screen with the icons appear I get a "low battery - 20% of battery remaining message". Nearly about a quarter of power gets drained? Frustrating.

  • Ipod touch 16gb 2nd gen not recognized by my pc or itunes..

    hello.
    received my Ipod touch 16gb 2nd gen this morning from an ebay seller.
    i have been trying to get it to work.
    its screen is ALL BLACK , DOES NOT POWER ON, DOES NOT CONNECT TO MY PC.
    I have installed latest itunes, my ipod isnt recognized, and it isnt even charging.
    Ive tried my old ipod classic's cable, which works with my old ipod.
    It doesnt work on touch either.
    tried on a different pc, no use. re installed itunes, tried everything, its just black :s what the heck is this ?
    I checked for serial number, it says on apple.com that it has warranty till Jan 2010
    these are the ipod diagnostic result via itunes:
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    INTEL DG31PR
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number 224064FDE8EF010E
    Current user is an administrator.
    The current local date and time is 2009-10-26 11:13:22.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA GeForce 9600 GT
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.

    it does have warranty
    So take it to an Apple store or go here -> https://selfsolve.apple.com/GetWarranty.do to send it in to Apple for repair.

  • Does iPod Touch 16gb requires Windows Service Pack 2???

    Last Month, my computer is Windows Sp2,and now i asked my aunt to find someone who formats a Personal Computer to format my computer again (because there are many errors)...And then my Computer is now normal,and the service pack is Sp1.Does iPod Touch 16gb requires Windows Service Pack 2 to Connect to iTunes library?Please answer ASAP.

    http://www.microsoft.com/windowsxp/sp2/default.mspx

  • My ipod touch wont restore - I plugged it into friends computer to charge and now it is stuck. How can I successfully restore and start using my I touch again (4th gen). TKS.

    my ipod touch wont restore - I plugged it into friends computer to charge and now it is stuck. How can I successfully restore and start using my I touch again (4th gen). TKS.

    You have to put the iPod touch into the recovery mode.

  • I went to update my ipod touch and restore it. it was working fine and then when it it restarted itself it it stuck onone scren te same one when u first get it, it will not do anythig elts what do i do please help

    i went to update my ipod touch and restore it. it was working fine and then when it it restarted itself it it stuck onone scren te same one when u first get it, it will not do anythig elts what do i do please help i whont my ipod touch back

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • There's no music in my device (ipod touch) after restoring content because of a software issue. music is available in my laptop's cloud though. how do i restore music in my device?

    there's no music in my device (ipod touch) after restoring content because of a software issue. music is available in my laptop's cloud though. how do i restore music in my device?

    hi! an error message showed on my device last week and Apple support  helped me restore the software on my device. Syncing went well and all my apps were available after. However, when I looked at my music in my device, it did not contain anything. The songs were in Itunes on my laptop and when I tried to play them they did not play. But, it says music is available for my account in the cloud. When I switched to the cloud, I was able to play my music already. But everytime I synced, the music from the cloud are not transferred to my device. Most of the music that I have are from other sources. How do I download those again to my device? I tried what I did before which was to copy the song from my laptop then edit paste it to iTunes but this did not work like before when automatically it becomes available on my device.
    pls help. thanks!

  • Ipod touch 16Gb not working since installing recent O4 upgrade

    My Ipod touch 16GB has died !! It stopped during the update when an error message appeared stating unable to SYNC IPOD. Now all I have is a black screen with the Apple Logo, and then a bar appears across the screen underneath the logo as if its trying to install software and show amount of time left. This goes on and on until the battery goes flat !!! Help please

    Hi amit,
    Am not sure about an old product but yea i once went to get my earbuds replaced under warranty priod. There was some trouble with it and they replaced it. I asked the guy to give me the other earplugs with mic and i can pay the difference. They told that they can only replace the same product even if you have to pay or not.
    May be an apple policy or Imagine own policy but that's what I think we can avail being apple users in India. Check for good places who repair iPod as am sure some do. No offence but I can take the chance of getting my ipod repaired from a third party after using it for a substancial amount of time. We all know its our inner feeling and warranty policies which normally hinders us.
    But surely you can call Apple support at 18004250744 or Apple sales 1800 425 4646 and confirm about this policy. Also, you can mail Apple directly and check.
    Rest if you want to stick to Apple reseller support itself then i would suggest to add a few more to that $230 amount and get the latest iTouch which now comes even in white and has innumerable new features. But never pay such a hefty amount and get the 1st gen itself.
    Regards,
    Amit

  • Unable to activate new ipod touch 16gb 4th gen

    Hi I just got a new ipod touch 16gb 4th generation & how turned it on to charge & set up etc.  I've connected it to my home wifi modem but from thereon it is unable to activate.  I have no idea of what software it's running.

    I've since been able to activate it to a degree - had to connect to a computer & download iTunes.  It still won't let me sign in even though I've set up & verified an apple login.  Very frustrating!!

  • Ipod touch 16gb not working

    i have been given an ipod touch 16gb that doesn't work . all i get on the screen is a small apple logo . every now and then a little circle will appear and flash clockwise . that is all i can get it to do and it doesn't see to charge either . any ideas please guys ?

    its not new no . i have held both buttons together for 10 seconds , thats about the only thing it will do . before he gave it to me it was working . he told me he had cleared all media off it so there were no photos or songs . he said it took about 2 hours to clear . i think he has wiped everything from the ipod .

  • TS3694 iPod Touch wont restore

    My ipod touch wont restore. When i connect it to the computer it says the ipod is in recovery mode so i proceed to recover the ipod than a error message comes up saying the iPod cannot be restored (1). Any help or ideas would be appreciated.

    ERROR (1)
    I have not seen a solution for that error but try:
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • My ipod touch has restore and hangup when i remove the usb connector.

    My ipod touch has restore and hangup when i remove the usb connector. Help me please, i don't know what to do. Thank you.

    What does "has restore" and "hangup" mean?
    Maybe the battery is dead but need more information.

  • IPod Touch, 16GB, Generation 5, will not sync with my computer?

    I purchased an iPod Touch, 16GB, Generation 5 from Wal-Mart. I've tried everything from re-installing iTunes to rebooting the computer and iPod. However, even after clicking Trust, it won't fully trust my computer as well as iTunes isn't recognizing it. For reference, I'm using a Windows 8, Dell PC, and iTunes is fully up to date.
    It will download music from the store on the device itself, and iTunes recognizes when the purchases are made on the device, but it still won't sync it.

    Try:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components

Maybe you are looking for

  • URGENT!! NEED HELP IN VB SCRIPTING IN FDM

    Hi Guys, I want to write a scipt in the BefImportMap under Events Scipts. The reason is when any user imports the mapping table(in my case an excel .xls doc), if the user imports any other excel by mistake then the mapping goes wrong and affects the

  • Going crazy trying to uninstall PC Suite

    Hi there Please excuse my total lack of technical knowledge however I have an old version of PC Suite 6 installed and I cannot get rid of it. I have recently got a 6120 classic and am trying to install the new version but the old version - which, inc

  • FLVplayback problem, please!

    Hi everybody. I have a strange problem. So I made an application with dynamical button creation from a XML file. Some buttons open a movie clip containing a flv video (played by flvplayback). Other open swf files (loadmovie) The problem is: If a flv

  • Installing CPRXRPM Add-On on CRM 7.01

    Hi, Title: Installing CPRXRPM Add-On on CRM 7.01 We have a CRM System with 7.01 or 7.0 Ehp1 version with Basis 7.02 version. Now, we want to install Add-On CPRXRPM 5.00 on this system. In Marketplace, under Software Downloads - Installations and Upgr

  • Contextual event consumption

    Hello, I am using JDeveloper 11.1.1.7.0. So.. I have a page that contains a region. The region has a contextual event that is activated when the selected item from a drop down list is changed. I am consuming the event (in the page) in a java class (t