IPod Touch 1st gen - cannot connect to wi-fi

Hi,
Am having a persistent wi-fi connection problem with my iPod Touch 1st gen, which I just bought second-hand. Any advice gratefully appreciated, as I have not been able to find a solution on the forums so far.
THE PROBLEM
The iPod detects the signal from my home wi-fi router. When I try to connect, it invariably gives the error message "Unable to join the network [name]". I have 2 laptops and an iPhone running on this network with no problems.
TROUBLESHOOTING TRIED
- upgraded to latest version of iTunes
- upgraded to latest version of iPod Touch software
- upgraded to latest version of router firmware
- removed all encryption on wireless signal (no WPA/WEP etc enabled)
- reset wireless settings on iPod
- removed all content from iPod & did a full restore & resync
Please help! Thanks in advance

I had the same trouble for about a year. Tried everything. This finally did it-
settings-wifi-other
manually enter network name, select WEP for security
enter password once network found
After this, the network address field was still initially blank, I toggled back and forth, then the address info just appeared, all good after that!
Everything else was a waste of time
It may help to clear Safari history and cache first (mine happened to be cleared after the unsuccessful reset}
Apple called it a hardware issue, and wanted me to send it in. Repair cost was near or more than replacement cost. This all started after 2.2.1 update - my best assumption was that the update over-clocked the wifi, and fried it. That didn't make sense to me, as it could still show the networks.
Hoe this helps you. The itouch was running 3.1.3 when I tried this last night.
Hope this helps! Reply back with your success stories!

Similar Messages

  • New iPod Touch 4th gen. cannot connect to home wi-fi network

    When I launch wi-fi on my new iPod Touch 4th gen. my home network's name is displayed, but after entering my password the iPod is unable to connect - the wheel to the left of the network name just keeps spinning.   The network still functions properly for all my other devices (MacBook, 2nd gen. iPod Touch, wireless printer and my wife's PC) and the new iPod Touch did connect to the network in the Apple Store when I visited yesterday.   I know the password I enetered for my home network is correct because I've checked it in my keychain, and also the iPod did not inform me that it was the wrong password for that network - as it does if I enter another password.
    I have followed the advice given to others - unplugging the Time Capsule and leaving it for 5 minutes, checking that all my software and firmware is up to date, 'forgetting' the network on my new iPod then searching for it again, and have completely restored the iPod - but it still cannot connect to my network.   If my network is functioning properly, and my new iPod was capable of joining the Apple Store's network yesterday, and I am sure that I am entering the correct password, it seems to me that my problem must be due to some network setting that is refusing to allow a new device to connect.   I can't find where that setting might be - can anyone advise?

    depending on what router but hopefully all routers came to this default address....
    192.168.1.1/Wireless_MAC.asp
    from
    >Setup of the Basic Setup you goto
    >Wireless
    >WirelessMacFilter
    also had an idea when i wanna make sure im typing the right one, i would do is tap each letter/# by 1, as in,
    (e.q.)
    here's my ipod 4 and my ipod 2, the pswd is 123456
    ipod 4, i press 1
    ipod 2, i press 1
    ipod 4, i press 2
    ipod 2, i press 2
    and so on till i reach both of them to 6 (1by1) to make sure i get it in there right. saw this on another wall it might depends on what channel your using, but i dont rly think that matters bc i have mine on auto and nvr had a problem.
    i would do this even thou it may sound crazy to others....if i were you this is what i would do
    on your ipod 2Gen
    >Safari
    >address to 192.168.1.1/WL_WPATable.asp
    -(wireless security settings for passcode)
    >tap the box for the password, whatever ur security is i would copy
    -IF WEP
    -copy phrase key and Key 1
    -IF WPA
    -copy phrase key
    >open Notepad
    >under iCloud account Notepad
    >Paste the Key
    >either on your pc/mac or your 2nd Gen, go back to
    >192.168.1.1/WL_WPATable.asp
    >change your Security Mode to Disable
    >goto your 4 Gen iPod Touch
    >goto settings and connect to it, if pswd is still in it then tap forget this network and reconnect to it
    -once connected and got IP adresses
    >goto Notpad under iCloud
    -you should have obtained your recent icloud msgs included the key you pasted
    -once obtained
    >gobk to pc/mac or ipod 2nd gen and re enabled the security and re-paste the key in
    -once router adjusted try to connect to it
    >1st do your 2nd gen and forget this network reconnect to it and repaste the key
    >2nd goto ur 4rth gen from your notes, highlight the key in ur notpad and tap copy and forget this network reconnect to it and paste the key.
    this should work bc i did it myself when i couldnt get connected bc thats almost the same steps i did.
    somtimes i put my name up on here. remeber these names we put as our nickname doesnt mean its our real name or anything like that,
    ~Anthony

  • Ipod touch 5th gen cannot connect to itunes store

    i just bought the new ipod touch 5th gen 1day old. when i try to connect to itunes it gives me the pop up 'cannot connect to itunes store."  Internet is working fine and my system is updated to ios6. Please help me.

    See:
    Can't connect to the iTunes Store

  • My ipod touch 1st gen says its connected to wifi, but when i go on safari it stops at "connecting" with a grey screen, what should i do, my router is fine, cause my brothers iphone 4th gen works, but my ipod touch 1st gen dosen't?

    yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?

    Try restarting your router by removing power to it for 30 seconds. This may correct the problem.

  • I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • IPod Touch 1st gen to iTunes connecting speed

    I'm an iPod Touch 1st gen newbie on iOS 3.1.3; My question is when connecting the iPod to iTunes 10.1.1 how long does it normally take for the device to show up? When connecting an iTouch that's OFF (connection turns it on), I find it probably takes 5-8 minutes for the device to show up. I'm left sitting there not sure if I need to do something. Should the device be ON? When using my iPod Nano (2nd gen) it shows up on iTunes very fast and I see the device on the Desktop. iTouch doesn't show up on the Desktop as a connected device even though Finder options is checked on so iPods are recognized. Otherwise, all is well and great with the device. Thanks.

    iPod touches and iPhones are not recognized as disk drives and therefore will not appear on the Desktop. I would say that 5-8 minutes to be recognized by iTunes is not normal, however.
    You might want to focus your efforts on your Mac. I would check/repair permissions on the HD, remove all earlier instances of iTunes, make sure you are running the latest version of OS X that you can (I think 10.5.8 is the latest you can use). You might have to uninstall iTunes and download/reinstall. The correct way to do that is in http://support.apple.com/kb/HT1224

  • IPod Touch - 1st Gen - iOS 3.1.3 "can't connect"

    Hello I have an iPod Touch - 1st Gen with iOS 3.1.3.  After each update of iTunes I get this same problem... I'll connect it to the PC and then iTunes will see it and start to sync up.  After a min or so it will say that it can't sync because it can't find the iPod...  Can someome help please?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable and USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

    After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Ipod touch(1st gen) stuck in recovery mode and cannot restore??

    I just bought a used ipod touch 1st gen.  It was fully functional before I wiped it.  I wanted to remove all of the other person's music and personal info before I started using it. I also wanted to update ios.  I wiped it and when it restarted it was in recovery mode. I have tried to restore it and I keep getting an error message that it could not restore unknown error has occurred  (1).  I have tried troubleshooting and going through all of the steps that Apple suggests and nothing has worked.  Any suggestions?  I just want it restored and updated to the latest ios that will work with it (3.1.1 I believe) I don't know what to do at this point.

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • Device cannot be found - iPOD Touch 1st Gen, PC with Vista

    An application prompted me to upgrade my iPOD Touch 1st Gen to 3.1.2 which I did. A problem occured during installation. The iPOD now locked to an image with an Itunes symbol and a cable. The iPOD resturns to this image also if i reset the device.
    Neither PC or iTunes find the device. Any recommendation?
    Håkan
    Message was edited by: hengman

    I would try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • IPod Touch 1st Gen and 3.1 update DELETES volume slider

    I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
    Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
    I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
    So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
    Thank you.

    I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
    I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things.

  • Help. I can't update iPod Touch 1st gen from ios 2.1.2 to 3.1.1; already paid for it.

    Hi all,
      I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
      I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one  seems to have a universal solution and I have tried several.
      I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
      Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.

    Yes, I have contacted them. They are who told me to try a few of the "fixes". They actually said they had never heard of this error, or any problems relating to his download. Also, when I was talking to them, they came here to this forum to find the answer...:/ This is why I am asking here. I was hoping someone had an idea I hadn't tried already.
    Thanks.

  • IPod touch 1st gen goes into recovery mode after shut down or lock

    Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
    So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

    Welcome to Apple Discussions
    Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
    http://support.apple.com/kb/HT1808
    As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

  • Ipod touch 1st gen MAJOR issues HELP!

    My hubby dropped his 16gb ipod touch 1st gen on the floor. It landed face down. It was working fine until the battery ran out and since then it will not hold a charge. I reset it last night and it finally charged over night (plugged into the wall) it said it was fully charged this morning but after it was unplugged it was working fine except the internet would not work. It would not connect to our wireless internet. (I have an 8gig second gen that works dandy no issues so i know its not my internet.) He had his ipod on for 20 minutes it got broiling hot and the battery was back at being almost dead. We shut it off let it cool down and then we've had it plugged in all day ( it's plugged in my computer now) and just keeps saying its got 10 minutes remaining on the battery. I restored it twice through itunes and updated it and it still will not charge but will stay on if its plugged in the computer or the wall saying its charging... also the internet still will not work. it will for a few seconds pick up my wireless but with only one bar but will not let me try to connect to it. It tells me it can't connect. Then, the signal comepletely disappears again. It won't find any wireless at all. I even went upstairs and sat in front of the modem lol. I've tried everythihng known to man and am out of ideas. Is the thing screwed? Someone please help....

    Sounds like something came loose or exposed. From what i read, it looks like your battery is losing it's charge quickly. My advice would be to take it in to a local apple store and see if they can fix it or run a diagnostic. Unfortunately, if i had to guess i'd say there's a hardware problem since your battery is dying so fast and is having charging problems. Good luck.

Maybe you are looking for

  • History Report

    Dear all As per requirements i have mostly completed the PM history report, which comprises Equipments specifications, BOM. Additionally i have to add the very important tasks, spares , Cost of operation also. Here we couldnt consider all the operati

  • Missing Video from clip when bringing into timeline

    I'm currently editing a video and half-way through, I'm not sure what happened but now whenever I try to insert a clip from left-hand side clip selection into the timeline, there is a circle with a line through it when I try to place the video where

  • How to know if a particular CWPlot already exists in a CWGraph (VC++)?

    I would like to add a CWPlot to a CWGraph only if this plot doesn't already exist within the CWPlots collection. The problem is that when I call "myGraph.GetPlots().item((COleVariant) "PlotN")", an exception is throwned if the CWPlot named "PlotN" do

  • Final Cut Pro X quits working...

    After I import a clip and try and play it the spinning ball comes up and I'm unable to do anything. Or if I try to create a project the spinning ball comes up. I haven't done anything different to my computer and I'm not doing anything different then

  • TCURR field TCURR_UKURS - field length is too short

    Has ECC6 addressed the field length issue of 9 characters (5 decimals) in table TCURR field UKURS to cater for weak currencies, to avoid using ratios of 1000:1