IPod Touch 1st gen question

If i buy the IPod Touch Software Update for the 1st gen only.
Also included is the app store?
I'm sorry my english isn't good.

If you purchase the upgrade to iOS 3.1.3, you will then be able to purchase and run third-party apps, yes. Not all apps will run on a 1st-generation iPod touch, though; more and more require either newer versions of iOS, newer hardware, or both.
Regards.

Similar Messages

  • When I sync my ipod touch 1st gen, it comes up with a message that I am not authorized on this computer

    When I attempt to sync my ipod touch 1st gen, it gives me a message that I am not authorized to sync on this computer and gives me my old user id. I don't use that old id and dont have access to the email address(no one does lol) and the security question is one that I would not even use. Anybody help?

    Try this previous discusssion:
    https://discussions.apple.com/message/12518406#12518406

  • IPod Touch 1st gen to iTunes connecting speed

    I'm an iPod Touch 1st gen newbie on iOS 3.1.3; My question is when connecting the iPod to iTunes 10.1.1 how long does it normally take for the device to show up? When connecting an iTouch that's OFF (connection turns it on), I find it probably takes 5-8 minutes for the device to show up. I'm left sitting there not sure if I need to do something. Should the device be ON? When using my iPod Nano (2nd gen) it shows up on iTunes very fast and I see the device on the Desktop. iTouch doesn't show up on the Desktop as a connected device even though Finder options is checked on so iPods are recognized. Otherwise, all is well and great with the device. Thanks.

    iPod touches and iPhones are not recognized as disk drives and therefore will not appear on the Desktop. I would say that 5-8 minutes to be recognized by iTunes is not normal, however.
    You might want to focus your efforts on your Mac. I would check/repair permissions on the HD, remove all earlier instances of iTunes, make sure you are running the latest version of OS X that you can (I think 10.5.8 is the latest you can use). You might have to uninstall iTunes and download/reinstall. The correct way to do that is in http://support.apple.com/kb/HT1224

  • IPod touch 1st gen goes into recovery mode after shut down or lock

    Alright, so I bought a used iPod touch 1st gen from a friend. It was working fine for a few weeks until it started shutting off and going into recovery mode when I locked or turned it off. When off, half of the times I can do a hard reatart and hold the home and hold buttonsand it will turn on. The other times it will just come up with a white screen. When I plug it into my computer, it says it has to be restored. And this is an ongoing loop that I cannot seem to fix. I looked up my serial number and it says it's out of warranty.
    So my first question is, is there anyway I personally can fix this problem, or do I have to take it to Apple? My second question is, what are their policies on iPods that were bought used from someone else? And is there a way for me to get a warranty on it to get it repaired if I can't fix it myself or do I have to pay full price on replacement or repairs?

    Welcome to Apple Discussions
    Did you let iTunes restore it? Has the problem continued? The article below discusses how to put your iPod into a recovery mode so you can fix it.
    http://support.apple.com/kb/HT1808
    As to your warranty, you no longer have one. Apple will, for a fee, repair your iPod if it needs repairing. There are independent shops who can do it as well - just Google them.

  • Video plays on iPhone 3G, but not iPhone 2G or iPod Touch 1st Gen

    Hi all,
    We're creating videos to be played on iPhones and iPod touch's. The videos are working fine on my iPhone 3Gs but won't play on my iPod touch 1st gen or a 2G iPhone. I've had a look and the supported video list is exactly the same on all iPhones and iPod touch's so I'm at a bit of a loss.
    The video in question is here if anyone fancies testing it themselves:
    http://media.som.cranfield.ac.uk/vod/ki/topic/The%20Economic%20Downturn/0015/toy otaht.mp4
    Anyone else hit this before??
    Cheers,
    Luke

    Hello iFixItMan,
    Have you had a look at this article related to potential driver issues on Windows PC? Have you tried using a different cable?
    http://support.apple.com/kb/ts1538
    What happens if you try to place the iPod into *Recovery Mode* using the instructions provided in this Apple support document on either of the machines?
    http://support.apple.com/kb/ht1808
    B-rock

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    I have not seen a solution for error (1)
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod touch 1st gen says its connected to wifi, but when i go on safari it stops at "connecting" with a grey screen, what should i do, my router is fine, cause my brothers iphone 4th gen works, but my ipod touch 1st gen dosen't?

    yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?

    Try restarting your router by removing power to it for 30 seconds. This may correct the problem.

  • IPod Touch 1st Gen Not Charging/Being Reconized

    As the title says, my iPod Touch (1st Gen) will be reconized bu any computer or charge all in itself. I tried plugging it into multiple computers, nothing. I tried plugging it into the wall adapter...still nothing. It doesnt not get the charging symbol when I plug it into either places. The is actually the second time it happend. The first, well my cord was so worn, I guessed it was the cord and replaced it, worked just fine. The replacement happend very recently, like maybe 1-2 months ago. So right now, I would guess it was the cord, but its brand new. I have tried toing both a soft and hard reset of the iPod, nothing worked. If anyone could please help me, it would be highly appreciated.

    - See if placing  the iPod in Recovery mode will allow a restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Then make an appointment at the Genius Bar of an Apple store.

  • IPod Touch 1st Gen and 3.1 update DELETES volume slider

    I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
    Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
    I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
    So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
    Thank you.

    I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
    I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things.

  • I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Ipod touch 1st gen won't show in itunes

    I have tried all of the following:
    restarted computer
    restarted iPod
    downloaded newest version of iTunes
    reset settings on iPod
    try all USB ports on my mac
    try all of my various ipod cables
    NOTHING WORKS!  will not show up in iTunes.
    Here are the specs of my devices:
    iPod Touch 1st Gen:  iOS 3.1.3
    iMac: 2.4 GHZ Intel Core 2 DUO running Mac OSX 10.5.8
    I really want to update my iPod touch...have no idea why this will not show up in iTunes.
    PLEASE HELP!!!!!!!

    Here is the help article that actually worked:
    http://support.apple.com/kb/TS3540
    a lot of work, but it finally is syncing.

  • Help. I can't update iPod Touch 1st gen from ios 2.1.2 to 3.1.1; already paid for it.

    Hi all,
      I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
      I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one  seems to have a universal solution and I have tried several.
      I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
      Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.

    Yes, I have contacted them. They are who told me to try a few of the "fixes". They actually said they had never heard of this error, or any problems relating to his download. Also, when I was talking to them, they came here to this forum to find the answer...:/ This is why I am asking here. I was hoping someone had an idea I hadn't tried already.
    Thanks.

  • I get error 5002 when trying to buy 3.1 software for iPod touch 1st gen

    I get error 5002 when trying to buy 3.1 software for iPod touch 1st gen. 

    That is a paid update you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • My ipod touch 1st gen . needs to be reset the wi-fi

    ipod touch - 1st gen .  the wi-fi needs to be reset

      THANK YOU SO MUCH ! I never used the " reset " option 'till now .... 
    I'm a happy camper ! 
    Happy Easter to you !!! 

Maybe you are looking for

  • Inspection with Task List Issue

    Hi Gurus, I have a situation where I am creating a "shell" Material. We are taking samples of Blood and just throwing them away. We don't need to have Inventory on them or costing.  I just want to use the QM module to keep the inspection results/data

  • Making a field in areport clickable

    Hi Guys, May I know how can I make a field in a report clickable? Once clicked, it will generate another report... This is however not an ALV, its just a simple report. Thanks for all your inputs... Regards, Mark

  • Form Customization

    Hi to all, i am facing a problem regarding FORM CUSTMIZATION in my form 2 date columns is there start_date_active and end_date_active for this column i used the trigger KEY-LISTVAL IF :SYSTEM.MODE != 'ENTER-QUERY' THEN CALENDAR.SHOW; END IF; AND IN P

  • Limit Items in WorkFlow

    Greetings, We have created a very long web form, but would like for the email workflow notification to only include fields that have values input into them.  Do you know of a way to accomplish this?

  • Force a Batch Job to fail with usefull message

    I would like to be able to force the end of execution of an ABAP program in batch mode when certain conditions occur. I would like to be able to send a message or name an error so as to give usefull information to someone reviewing the batch log as t