IPod Touch 1st Gen Wi-Fi Issues

About a week ago, my iPod Touch would not connect to previously known wi-fi networks. Even free, open networks with no security would not allow me to connect to them. I can see the wireless networks on the iPod, but every time i tap one to connect, I get the error message "Unable to connect to [insert network name here]." Does anyone have any idea what to do? I tried restoring it, and it worked for about 12 hours, then the same problem started happening. So i restored again, and the same thing happened. Then after a 3rd restore, it didn't work. So I waited 3 days, and restored again, and it worked for 12 hours and then quit. I restored it last night and it was working, but this morning it wasn't and still isn't after 2 restores. Any help would be greatly appreciated. By the way, my power/sleep button does not work so if the solution required that, it will not work.

Do you have this problem with all networks or only your network? If only your network that points to a problem with your network.
Have you powered off and then back on your router?

Similar Messages

  • Ipod touch 1st gen MAJOR issues HELP!

    My hubby dropped his 16gb ipod touch 1st gen on the floor. It landed face down. It was working fine until the battery ran out and since then it will not hold a charge. I reset it last night and it finally charged over night (plugged into the wall) it said it was fully charged this morning but after it was unplugged it was working fine except the internet would not work. It would not connect to our wireless internet. (I have an 8gig second gen that works dandy no issues so i know its not my internet.) He had his ipod on for 20 minutes it got broiling hot and the battery was back at being almost dead. We shut it off let it cool down and then we've had it plugged in all day ( it's plugged in my computer now) and just keeps saying its got 10 minutes remaining on the battery. I restored it twice through itunes and updated it and it still will not charge but will stay on if its plugged in the computer or the wall saying its charging... also the internet still will not work. it will for a few seconds pick up my wireless but with only one bar but will not let me try to connect to it. It tells me it can't connect. Then, the signal comepletely disappears again. It won't find any wireless at all. I even went upstairs and sat in front of the modem lol. I've tried everythihng known to man and am out of ideas. Is the thing screwed? Someone please help....

    Sounds like something came loose or exposed. From what i read, it looks like your battery is losing it's charge quickly. My advice would be to take it in to a local apple store and see if they can fix it or run a diagnostic. Unfortunately, if i had to guess i'd say there's a hardware problem since your battery is dying so fast and is having charging problems. Good luck.

  • Help. I can't update iPod Touch 1st gen from ios 2.1.2 to 3.1.1; already paid for it.

    Hi all,
      I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
      I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one  seems to have a universal solution and I have tried several.
      I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
      Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.

    Yes, I have contacted them. They are who told me to try a few of the "fixes". They actually said they had never heard of this error, or any problems relating to his download. Also, when I was talking to them, they came here to this forum to find the answer...:/ This is why I am asking here. I was hoping someone had an idea I hadn't tried already.
    Thanks.

  • Video plays on iPhone 3G, but not iPhone 2G or iPod Touch 1st Gen

    Hi all,
    We're creating videos to be played on iPhones and iPod touch's. The videos are working fine on my iPhone 3Gs but won't play on my iPod touch 1st gen or a 2G iPhone. I've had a look and the supported video list is exactly the same on all iPhones and iPod touch's so I'm at a bit of a loss.
    The video in question is here if anyone fancies testing it themselves:
    http://media.som.cranfield.ac.uk/vod/ki/topic/The%20Economic%20Downturn/0015/toy otaht.mp4
    Anyone else hit this before??
    Cheers,
    Luke

    Hello iFixItMan,
    Have you had a look at this article related to potential driver issues on Windows PC? Have you tried using a different cable?
    http://support.apple.com/kb/ts1538
    What happens if you try to place the iPod into *Recovery Mode* using the instructions provided in this Apple support document on either of the machines?
    http://support.apple.com/kb/ht1808
    B-rock

  • IPod Touch 1st gen - cannot connect to wi-fi

    Hi,
    Am having a persistent wi-fi connection problem with my iPod Touch 1st gen, which I just bought second-hand. Any advice gratefully appreciated, as I have not been able to find a solution on the forums so far.
    THE PROBLEM
    The iPod detects the signal from my home wi-fi router. When I try to connect, it invariably gives the error message "Unable to join the network [name]". I have 2 laptops and an iPhone running on this network with no problems.
    TROUBLESHOOTING TRIED
    - upgraded to latest version of iTunes
    - upgraded to latest version of iPod Touch software
    - upgraded to latest version of router firmware
    - removed all encryption on wireless signal (no WPA/WEP etc enabled)
    - reset wireless settings on iPod
    - removed all content from iPod & did a full restore & resync
    Please help! Thanks in advance

    I had the same trouble for about a year. Tried everything. This finally did it-
    settings-wifi-other
    manually enter network name, select WEP for security
    enter password once network found
    After this, the network address field was still initially blank, I toggled back and forth, then the address info just appeared, all good after that!
    Everything else was a waste of time
    It may help to clear Safari history and cache first (mine happened to be cleared after the unsuccessful reset}
    Apple called it a hardware issue, and wanted me to send it in. Repair cost was near or more than replacement cost. This all started after 2.2.1 update - my best assumption was that the update over-clocked the wifi, and fried it. That didn't make sense to me, as it could still show the networks.
    Hoe this helps you. The itouch was running 3.1.3 when I tried this last night.
    Hope this helps! Reply back with your success stories!

  • Trying to get my ipod touch (1st gen) to upgrade to ios 3.1.1

    Trying to get my ipod touch to upgrade to ios 3.1.1.   I get an error message 8288

      Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
      “SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
      Here is my original post explaining what I had already tried:
    “Hi all,
    I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
    I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
    I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
    Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.”
    Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
    Tiffany
    P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • My ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend

    I have not seen a solution for error (1)
    make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod touch 1st gen says its connected to wifi, but when i go on safari it stops at "connecting" with a grey screen, what should i do, my router is fine, cause my brothers iphone 4th gen works, but my ipod touch 1st gen dosen't?

    yes, so i connect to my wifi at home, my brothers iphone works fine, but my ipod touch 1st gen dosent conect. it connects but when i go on safari it dosent work, it says" connecting" with the circle loading thing. plz help< o and my router is fine because my brothers iphone works great, ive tried restoring and reseting networks, and ive also tried forgetting the network, my ipod touch 1st gen is out of its warranty, so what can i do?

    Try restarting your router by removing power to it for 30 seconds. This may correct the problem.

  • IPod Touch 1st Gen Not Charging/Being Reconized

    As the title says, my iPod Touch (1st Gen) will be reconized bu any computer or charge all in itself. I tried plugging it into multiple computers, nothing. I tried plugging it into the wall adapter...still nothing. It doesnt not get the charging symbol when I plug it into either places. The is actually the second time it happend. The first, well my cord was so worn, I guessed it was the cord and replaced it, worked just fine. The replacement happend very recently, like maybe 1-2 months ago. So right now, I would guess it was the cord, but its brand new. I have tried toing both a soft and hard reset of the iPod, nothing worked. If anyone could please help me, it would be highly appreciated.

    - See if placing  the iPod in Recovery mode will allow a restore
    - Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Then make an appointment at the Genius Bar of an Apple store.

  • IPod Touch 1st Gen and 3.1 update DELETES volume slider

    I had a perfectly working iPod Touch 1st Gen/16GB until I updated to 3.1 software. Now I do not have a volume slider.
    Yes headphones are in but there is no place to adjust the volume. There is previous, next arrows and play and pause AND its centered in the rectangular area, but no volume slider.
    I have restored it 3x in various ways. I have tried 5 times to downgrade the operating system but ALWAYS get an error, so it never completes. Of course the ipsw files where found using google because there isn't any links that work on Apple's site for previous iPhone software. If I try to restore to 3.1 right after that it goes through perfectly.
    So it seems that Apple has locked out downgrading once you upgrade! All I want is my volume slider back. How can I get it back if 3.1 deletes it everytime and I can't go back to the previous operating system?
    Thank you.

    I too have had this exact same problem, except that I was running 3.0 and hadn't updated to 3.1. I put my ipod on the table overnight, after listening to it, and when I picked it up the next morning, theres no volume slider. I never even unplugged the headphones. Double clicking the home button while on the home screen would bring up the popup to skip songs, and there it says "Dock Connection" even though it not connected to a computer. Multiple reboots an no effect. I've tried different sets of headphones, to no effect. Its like the iPod isnt detecting them being plugged in. The worst part is i DO get sound in the headphones, but no volume control, and the sound level is turned really low. So the headphones ARE working.
    I updated to 3.1 just now, and the problem has NOT been fixed. Theres no way anywhere in the settings to adjust the volume. Theres only a limit slider, so I have no way to turn up the volume loud enough to actually HEAR things.

  • I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • When I sync my ipod touch 1st gen, it comes up with a message that I am not authorized on this computer

    When I attempt to sync my ipod touch 1st gen, it gives me a message that I am not authorized to sync on this computer and gives me my old user id. I don't use that old id and dont have access to the email address(no one does lol) and the security question is one that I would not even use. Anybody help?

    Try this previous discusssion:
    https://discussions.apple.com/message/12518406#12518406

  • Ipod touch 1st gen won't show in itunes

    I have tried all of the following:
    restarted computer
    restarted iPod
    downloaded newest version of iTunes
    reset settings on iPod
    try all USB ports on my mac
    try all of my various ipod cables
    NOTHING WORKS!  will not show up in iTunes.
    Here are the specs of my devices:
    iPod Touch 1st Gen:  iOS 3.1.3
    iMac: 2.4 GHZ Intel Core 2 DUO running Mac OSX 10.5.8
    I really want to update my iPod touch...have no idea why this will not show up in iTunes.
    PLEASE HELP!!!!!!!

    Here is the help article that actually worked:
    http://support.apple.com/kb/TS3540
    a lot of work, but it finally is syncing.

  • IPod Touch 1st gen to iTunes connecting speed

    I'm an iPod Touch 1st gen newbie on iOS 3.1.3; My question is when connecting the iPod to iTunes 10.1.1 how long does it normally take for the device to show up? When connecting an iTouch that's OFF (connection turns it on), I find it probably takes 5-8 minutes for the device to show up. I'm left sitting there not sure if I need to do something. Should the device be ON? When using my iPod Nano (2nd gen) it shows up on iTunes very fast and I see the device on the Desktop. iTouch doesn't show up on the Desktop as a connected device even though Finder options is checked on so iPods are recognized. Otherwise, all is well and great with the device. Thanks.

    iPod touches and iPhones are not recognized as disk drives and therefore will not appear on the Desktop. I would say that 5-8 minutes to be recognized by iTunes is not normal, however.
    You might want to focus your efforts on your Mac. I would check/repair permissions on the HD, remove all earlier instances of iTunes, make sure you are running the latest version of OS X that you can (I think 10.5.8 is the latest you can use). You might have to uninstall iTunes and download/reinstall. The correct way to do that is in http://support.apple.com/kb/HT1224

Maybe you are looking for

  • Inutilização de NF-e Erro GRC 109 - Não sincroniza com ERP.

    Foi enviada uma solicitação de cancelamento de uma NF-e que não estava autorizada para a SEFAZ. Acredito que não foi aguardado o tempo de retorno da SEFAZ e na sequencia foi solicitada a INUTILIZAÇÃO. Após esta ação, ocorreu o erro : Document 0006776

  • Error in deploying ejb in winXP

    Hello, I am not able to deploy any ejb application using weblogic7 in winxp,which i did suceefully in win2000 system.Does xp support weblogic. .I am getting the following errors. D:\stateless>java weblogic.ejbc slsb.jar Exception in thread "main" jav

  • Application Compatibility - 9.2.0.6 vs. 9.2.0.7

    Hi, I'm a rather newbie so please bear with me. We have an application that was QA'd against Oracle 9.2.0.6. We would like to predict how well our application will run against Oracle 9.2.0.7. That is, were any of the programmatic API's, network proto

  • SAP PI 7.3.1 File Adapter - Select file based on content

    Hi all, I have a scenario where I need to process a file differently based on the content within the payload. For example a file called File_IS,xml is sent to a folder that PI is polling. Within this file is a field <TYPE> which I want to use to dete

  • Is it possible to enable Subpixel rendering on iPad Mini?

    Hi, is it possible to enable Subpixel rendering of text on the iPad mini?  That would make text easier to read at small sizes. http://en.wikipedia.org/wiki/Subpixel_rendering