Ipod Touch 2.0.2 update problem

ok so i just bought the 2.0.2 update
when it started downloading, it said that my computer was full or something so i cound't get it in and now i have no idea how to get it back
do i have to buy it again or something..

I just upgraded my Touch which is a week old, as in why did I have to buy an upgrade for a product when that upgrade came out long before I made my purchase.
At any rate I followed the instruction to upgrade, after the reconfiguring and rebuilding I get an error message that a problem had developed and my touch could not be mounted. I have a permanent plug into iTunes instruction on the screen and of course it didn't show up on my desktop or will my Touch open iTunes. I can restart but just get the USB cord pictures telling me to plug it into iTunes. I paid $10 for what?????????

Similar Messages

  • IPod touch 2.0.1 update problems

    My computer notified me that there was a new update (2.0.1) so i clicked download and update. It finished downloading, and started to install. It put my iPod into recovery mode (connect to iTunes screen) and iTunes said that the "IPHONE" has an error. I clicked OK and iTunes did nothing. So I reconnected my iPod touch and in iTunes came up to say " iTunes has discovered an IPHONE in recovery mode" so i selected restore. The Apple logo appeared and the screen slowly faded to white with a gray rectangle in it. I reset it and it was fine.
    Anyone else have this problem or any other problems with updating to 2.0.1?

    I had the same problem with my ipod touch... What is happening with the 2.0.1 update???

  • HT201210 been trying to restore ipod touch for days after updating itunes. keep getting error #9. Tried it on 2 computers, with vista + XP. tried all the solutions posted. nothing is working. Thanks Apple. Didn't have this problem before updating itunes!

    Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • My ipod touch was in an update and froze.  I tried to restore and an apple just stays on front and the screen stays white

    My Ipod touch was in an update and froze.  It shows a blank screen and sometimes shows an apple.  Now it will not restore.   What do I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My iPod Touch 4th Generation finished updating and now it won't turn on. the charge finishes, and when plugged in, it goes to a blue then white screen. and i cant do anything. also wont connect to iTunes. pls help

    hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar
    Some other users have had the same problem

  • My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch was trying to update and is now broken how do i fix it

    My ipod touch was trying to update but wouldnt finish so i tryed restarting it, it is now frozen on a white screen, wont restart properly, and itunes wont read it. How do i fix it and whats wrong with it??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update now it doesn't even turn on completely. The apple logo appears but then the screen goes blank. What should I do?

    I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update. Now my iPod doesn't turn on completely. The apple logo appears but then the screen goes blank. I've tried charging it, letting it discharge, I've tried things I found on the internet but nothing seems to be working. What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Original text by lllaass
    -Ethan

  • I cannot copy or sync any songs/ albums to my ipod touch 64gb. Have no problem with my ipad and iphone.

    I cannot copy or sync any songs/ albums to my ipod touch 64gb. Have no problem with my ipad and iphone.

    Tried both methods you have mentioned previous many times without success - to answer your questions
    What exactly happens when you try to sync?
    Nothing is copied
    Does iTunes see the iPod?
    Yes
    Was the iPod previous synced to another iTunes library/computer?
    No
    Have you successfully synced from this iTunes library/computer before?
    Yes - just once when I first got it
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Yes computer os has been updated, I think
    Do the songs play in iTunes?
    Yes, on my computer and on my ipad and phone
    Does any media now sync to the iPod?
    Yes, synced my iPhone first, this morning
    Do you have the right boxes checked to sync?
    Tried every combination imaginable, including the settings that I had when syncing my iPhone this morning.
    Hope this helps - it's a real pain.

  • IPod Touch 3 won't update apps

    iPod Touch 3 won't update apps. When I respond to the notice of an available update, the icon dims and a "waiting" message appears under it. It will hang like that until I delete it and reinstall the new app. I had another problem that has been resolved when I tried to get more episodes of a podcast, I ended up with 11 of them in the queue that wouldn't ever finish. They too would just hang there. I had to delete them all and get them through iTunes. I don't know how to upgrade the apps from iTunes though. Why is this happening just since I upgraded to ios 5.0.1?

    yoipodproblem wrote:
    If We Update 2nd Gen Ipod Touch From 3.1.3 To Higher Level WilL It Slow my iPod  :/
    I suppose that's debatable.
    My iPod does ocassionaly take a few seconds to carry out a command, but since it is such a powerful device, capable of so much, I'm prepared to wait two extra seconds.
    (I have 2nd generation iPod Touch with iOS 4.2.1 on it.)
    By the way, since your question has no connection to the one asked by the original poster, it would have been far wiser for you to create your own thread. That way, you are actually more likely to get responsess to your question.

  • HT4972 my ipod touch wont let me update IOS and becuase of that i cant download any apps

    my ipod touch wont let me update IOS and becuase of that i cant download anything of the app world is there anyway of helping me

    Do you have a 2G iPod. Those can only go to iOS 4.2.1.
    A 1G can only go to 3.1.3
    A 3G only to 5.1.1
    Identifying iPod models
    What version of iTunes is on the computer? The latest is 11
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. what do i need to do?

    I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?

    Does it happen with the apps that came with the iPod?
    Does it happen with all apps you have downloaded/installed?
    Have you ried deleting the apps and redownload/install the apps?  You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
    Next would be to restore from backup
    Last would be to restore to factory defaults/new iPod.

  • Ipod touch 3gen failed to update and will no longer work

    my ipod touch 3g tried to update but i failed and now my computer dosent reconize the ipod and the screen will not change

    how can i fix it?

  • Another New IPod Touch Owner with Wi-fi Problems

    Another New IPod Touch Owner with Wi-fi Problems.
    I have been working at this for about 4 hours now with no success and I am getting pretty frustrated, so if it show up in my typing please ignore it. I just don't understand why these multi-million dollar companies can't write a manual or put up a web site that can actually help someone with a problem.
    Ok, venting aside.
    I am running a gateway computer.
    Operating System = XP
    Router = Linksys WRT54G
    I have two other computers that are working fine with the existing wireless net work and have been for some time.
    I'm pretty good with my computer but haven't touched my router since initial set-up and all that was done was a basic set up.
    My I-pod is searching for a network and I'm three feet away from it but it doesn't find it.
    I printed out my wireless setting. I presume SSID name equals the name box on the ipod-touch
    Security = WEP
    What seems to be kicking my A$$ is the password. The route setting have never been changed so I would pesume the password should be the default "admin" which I put in (JOIN) and get the "Could not find network" screen
    So, I have perused this message board trying to discover and answer to mine, and and apparently many others question with no definitive results.
    So I guess what I and everybody else needs is a step by step how to guide on how to discover the info needed and enter in what we need to make this work.
    Thanks in advance to anybody that can actually help with this issue. A step by step do this would be nice.

    Thank you Terpfen for replying, and please excuse my ill temper earlier. I've calmed down some now.
    Step: 1 followed step one previously, Main screen, settings, Wi-Fi. Also set power down to 5 min to give I-Pod plenty of time to find network.
    Wi-Fi Network Screen.
    Wi-Fi ON
    Choose a Network (searching indicator) symbol spinning.
    Other ...
    Ask to Join Networks ON
    At this point the I-pod does not find any networks available. The indicator just spins but never returns any results. I am 3 feet for my WRT54G router.
    Hence the easy connect isn't connecting.
    The next step. is to manually set-up the connection.
    Main screen, setting, Wi-Fi, Other.
    press "Other" which brings up two fields
    Name __________
    Security ___________
    First Question? Which Name are they looking for. when I went to my router 192.168.1.1 It has the name linksys. However, when I go to my Wireless Network setting it has the name * ???? * which is different than Linksys router.
    Now, since one of the goals here is file sharing I presume I should be using the Wireless Network settings name. (which I have tried.)
    Next is security, Wireless Network setting indicate setting for WEP Once this is selected you then back-up to the "Enter Network Setting Screen" and you now have a password line added.
    Now I have never set a password for the router so the password for the router is the default Password "admin" And I don't recall ever setting a password for my network setting. But, I only use about three different passwords and a cycled through them still with no success.
    So, I need some expert advise on how and where to find the info to input into the required field to work or what I need to reset in my router to make this work.
    Thanks again for anyone who has constructive input to resolve my and probably many other peoples issues with this problem.

  • My iPod Touch 3rd Gen is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. Is this a common problem? Is there a fix?

    My iPod Touch (3rd Gen) is having problems with the touch screen being unresponsive, too responsive, freezing and constantly resizing. It varies between not responding when I tap the screen and acting as if I double-tap or tap and hold when I tap. Every so often it freezes for a minute or so and then comes back. The scren is constantly changing sizes too such that I often can't see most of the top status bar or other edges. This makes typing almost impossible, ruins most games and generally makes everything difficult, but otherwise the iPod is working correctly. Powering off, shutting down apps, letting it sit have not worked. This has happened once before months ago, but the issue resolved itself somehow. Is this a common problem? Is there a fix?

    Try this for the freezing
    http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
    Or if they don't work put it into recovery mode
    See here
    http://www.apple.com/support/ipodtouch/assistant/restore/
    Then restore
    http://support.apple.com/kb/HT1414

Maybe you are looking for

  • How to include spaces in javaplugin.jre.params

    G'day, I;m working with the Java Plug-In v1.3.1 with Windows 2000 and would like to define a property using the javaplugin.jre.params, namely javaplugin.jre.params=-Djava.ext.dirs\=D\:/Documents and Settings/cpudney/lib/ext so I can define my own sta

  • [SOLVED] How to use GPT GUIDs for referencing partitions in /dev?

    Hi all,          I wanted to know whether it is possible to use Unique Partition GUID of a GPT partition to setup /dev/disk/by-part-uuid (something like that) and using that path in the bootloader config's 'root= ' kernel parameter. It is possible to

  • I need an android adobe reader that logs into protected document

    I am using a samsung galaxy 3 and downloaded the adobe reader to acxess pdf files from my school and the documents require us to sign in otherwise it stays ina protected unreadable mode. what can I do to fix this.

  • Can I upgrade CS5 on a Mac running Maverick?

    I have a Macbook Pro, running Maverick, and older version of Creative Suite, CS5. Still works, but I have been getting notices that upgrades to this are available. BUT...cannot tell anything about the upgrades - if they will work on this platform, if

  • Turning up or down the volume without disturb

    Is there a way to disable the disturbing icon and the clicking sound when I press F11 and F12 on the keyboard?  It's very annoying.