IPod touch 2G does't work with Kenwood car radio anymore

Hi
since a few days ago, my iPod touch 2G does not work anymore with my car radio Kenwood KDC-W4544U.
When i connect the iPod to the radio, the radio display shows "Reading", which it normally shows for like 5 seconds. But now the "Reading" lasts forever, after 10 minutes of trying to let my radio read the iPod, i have no other possibility but listen to CD or radio...
I have already shut down and restarted the iPod, synched it, even restored it via iTunes. I also tried three different connection cables.
Is this a known problem and is there maybe a solution?
Thanks in advance for an answer

Problem could be solved by hard-resetting the radio

Similar Messages

Brand new ipod Touch (8GB) does not work with DHCP

I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all possible. I'm using a Linksys WRT54G. I was able to use an old Linksys wireless router and the touch gets an IP, etc. with no problems but I can not get my Touch to work with the WRT54G. Any ideas?

its possible to have a bad power supply that has too much AC ripple on the output which can make the screen do weird things
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

The earphone port on my ipod touch 4 does not work anymore, will I need to send it in for repairs?

Apple will exchange your Pod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like this one is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IPod Touch 3G w/ stopped working with car stereo/docking speakers

After I upgraded to OS 4, my iPod Touch 3g stopped working through the USB port of my car stereo (just says "reading" and never progresses from there). It also stopped working through the docking station (basically a large clock radio) that I bought for my living room -- it will recharge and play music through the speakers but the docking station and its remote can no longer control the music (can't advance to the next song or anything else), so I have to physically change things on the ipod itself.
I was told by Crutchfield (where I'd purchased the car stereo) that this was a known problem with Apple -- that with OS4, many of the devices that previous worked with iPods no longer worked, and that this would be resolved in a later version of the OS that would provide some backward compatibility. However, I can't find anything at all about this.
If anyone knows more information about this, or has a link to where I might be able to read more, I'd appreciate the info. I selected and installed both the (almost new!!) car stereo and docking station specifically because they allowed me to connect and control my iPod, and now I've lost that functionality and the $$ I put into those devices (over $300 total)!

I apologize for posting a bit early. Found an Alpine manual online and i needed to set the AUX port to off. They also recommended a reset of the Touch. After doing these two things it is now working. Maybe this will help someone else.

Anyone got the new iPod touch 2nd gen to work with the fatman itube dock???

Hi all,
Recently for christmas I've bought a new iPod touch 2nd gen and it's awesome, everything is great about it - in my opinion; except for the fact that I tried to dock it on the fatman itube docking station and found it not to work. Before I used it I was aware that the 2nd gen is unable to charge on the dock however I didn't expect the speakers not to work too. All that happens is a message on the ipod comes up saying unable to charge with this accessory but doesn't put any sound output into the fatman, it just sits there blasting out it's own quiet internal speaker, and also strangely the remote DOES work too???
I've read on the net that maybe resetting the ipod by holding the home+stand-by switch for 10 secs but this resets and does not fix the problem...
There are many photos on the fatman website showing a ipod touch docked so it seems to be sold as working with it but who's to blame for this fault? Apple or fatman?? And does anybody know of a fix for it?
Also I tried my mums ipod nano with the fatman - works fine, and my firmware on the ipod touch is nice and up to date with version 2.2 so I can't see anything else I can do. This was my christmas & birthday present and at the moment I'm quite annoyed that all I can do to it is stick a mini jack in the headphone socket - not ideal since there's no video output or remote control that way!!!
Please give advice if there is any out there,
Thanks,
Mrghostie.

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

IPod Remote application does not work with Ethernet

I can control iTunes on my MacMini from the Remote application on my iPod Touch only if the Mini is connected to the router by WiFi, but not if it connected by Ethernet cable. Unfortunately, I need to connect the MacMini to the router by Ethernet (because of another problem), but this is preventing me using the Remote application.
The wireless access point is an Airport Express connected to the router by Ethernet cable. The iPod Touch communicates with the Airport Express.
The Remote application cannot find my iTunes music library. However it can connect to the MacMini using "ssh". When I select "Add Library" on the remote, the iPod does not show up in iTunes on the Mini. I have tried turning off the firewall in the MacMini but this does not help. However, if I connect the MacMini by WiFi instead of Ethernet cable, it works fine.
My router has a firewall between the Internet and the LAN, but not between the LAN ports. I also cannot see any settings on the Airport Express that might block this connection.
Any help would be appreciated.

similar (unresolved?) issue here https://discussions.apple.com/message/9480306#9480306

My ipod touch is no longer working with universal dock since downloading the new OS

I have the Apple Universal Dock. It had been working fine with my ipod touch. I just downloaded the new OS and now my ipod touch will not work with the Universal Dock.
Any ideas?

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

How To Get Ipod Touch 2nd Gen to work with 64 bit Vista / Vista Ultimate

Okay, so I just got me a 2nd Gen Ipod Touch for X-Mas..I decided to take a break and get this puppy installed on my HP Tablet. Like many of you, I struggled in frustrations. I hate Apple Support. Notice their method to resolve all of their issues in regards to Itunes not working or Touch not working is to just REINSTALL ITUNES....doesnt solve anything. I have a solution.
For many of you, this may work, for those that are experiencing the same problem, please read below.
What I am using:
HP Tablet TX1000
Platform: Windows Vista - Ultimate 64 Bit.
I downloaded the 64 bit version of Itunes 8.02...hoping the thing will work, and still after plugging in my brand new ipod... i get an error message saying.
"The IPOD you are using is not recognized by this version of Itunes, please delete and reinstall with 64 bit version of Itunes."
However I did install the 64 bit version of ITUNES on my Vista. Before you guys delete and reinstall again. Do this first to confirm that my solution will help.
Open up Itunes, go to help, click on Run Diagnostics. Select only, Ipod/Iphone Connectivity tests and hit next.
If your Apple Mobile Device Service is RED, it means its not installed or not activated. Please read apple forums for the reactivation of AMDS. *If you are like me and did that help, and realized its not installed,* something on vista is preventing the install.
Do the following.
1) Delete ITUNES Completely. When asked for a restart, click No.
2) Go to the C:\Program Files\Common Files and look for the Apple Folder and delete that puppy too.
3) Redownload the 64 bit Installed and save to your desktop. You will need this later. DONT INSTALL NOW.
4) Go to the Start/Circle Menu and on the bottom, type RUN in the Search and select the Run Program.
4) Type msconfig and hit enter.
5) When the Program pops up, in the General, DE-select normal startup and select. SELECTIVE START UP. and deselect/leave blank START UP ITEMS
6) Move over to the Start Up Tab, DESELECT ANY VIRUS SCAN PROGRAM You Have Running.
7) Click Apply then OKAY, and Exit that window.
8) Now RESTART your computer.
9) Reinstall ITUNES as done before.
10) Go to HELP...run the diagnostics as before and your Apple Mobile Device should be green Now.
11) Close that window. Connect your IPOD.
12) iTUNES should now recognize your IPOD.
After it works. Go back to MSCONFIG...and on General, put Normal Start Up. Click Okay. Restart.
Hope that works.
If IPOD is still not recognized, then its a driver issue and I dont know.
The problem I was having was due to Apple Mobile Device Services not being installed.
Sincerely,
Dr. SkiLLz. M.D.

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

Ipod Touch STILL won't work with Windows 64-bit

Argh!
So, I've read the entries about the new Itunes 7.6, and how it should work with my Ipod Touch.
I uninstalled all my previous Itunes, and Quicktime software. I then installed the new Itunes64.exe. Everything worked fine.
But then, I connected by Itouch and it says "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, the install the 64-bit version of Itunes."
I'm confused what the problem is. I just DID that!?! What do I need to do differently? Anyone have an idea?
Thanks in advance!

Hi,
I’ve got the new version of Itunes (7.6.1) but I still get the error where it tells me to download and install a 64-bit version of Itunes. This is just ridiculous!!! I bought my IPOD touch before Christmas and i still haven’t been able to use it!
I've uninstalled and installed itunes and all that rubbish about 5-6 times now, i've deleted everything to do with Apple from my machine and also nearly killed my machine because i messed around with the registry (that's my fault :P)
NOTE: I used IE 64-bit version to download the installer.
Anyone have a solution to the problem?

Ipod touch and itunes not working with vista?

I bought a 32gb ipod touch(2nd gen) today and so far it's been nothing but a massive headache for hours. I've had an ipod video(30gb) for three years now and it's always been perfect, hasn't give me an ounce of trouble.
I get home, checked that I had the current itunes version, and then plugged in my ipod touch. I immediately got an itunes error saying that the apple mobile support device was out of date, and I had to re-install itunes. I did that but it still didn't work, it wouldn't recognize my ipod touch. I deleted all my itunes and apple folders and restarted(and uninstalled). Now my ipod still won't recognize when i plug it in on my desktop, it gives me an intunes error saying something like " your ipod touch cannot work because you dont have the 64bit version blah blah ". Which is ridiculous because I'm on windows vista 64bit, and the version of itunes I got was the 64 bit, i checked it three times and even re-downloaded/installed it.
I tried my second desktop which is on windows XP and it wouldn't recognize my ipod touch either. Then finally I took out my laptop which is windows XP, and plugged in my ipod touch. My ipod touch works fine on my laptop, but not on my other two desktops.
I need for it to work on my main desktop(the one with vista) because it has all my music.
So any ideas as to why this is happening? and how to fix it.

Hi,
What is the name of the iTunes installer file you used? Try downloading and installing the iTunes again from the iTunes64Setup.exe file located here: http://support.apple.com/downloads/iTunes8_1_1_for_Windows__64_bit
If the issue persists, verify the usbaapl64.sys driver is being used by following the steps under *Verify iPhone Driver/Service Installation* in this article: http://support.apple.com/kb/TS1495
If the issue is not resolved after installing iTunes from the iTunes64Setup.exe file and the correct driver is being used, reconfigure or disable the security software on the PC and reinstall iTunes.
-Jason

5th generation iPod Touch speaker is not working with music and apps, but the alarm sound goes off fine. Why?

I have a 5th generation iPod Touch and it got a small amount of water in it around the speaker. When I tried to see if my music would play through it, it couldn't. But, when I tried my alarm to make sure I could still hear it, you could. The sound was fine from the alarm, not as loud as it used to be but I could still hear it. Why doesn't the sound work with my music and apps? Also, would I be able to exchange it if I have a warranty?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

The scroll feature on my touch pad does not work with 4.0. Works in all other apps including 3.6. What hapened???

I can not scroll through web pages with the scroll feature on my touch pad. It worked in 3.6 and all other programs that I use. I have tried 4.0 twice with the same results, I've restarted, rebooted etc.
This should not be application dependant but a system function.
Now I will either roll back to 3.6 where I have troubles with some secure sites or just dump the whole thing and try Chrome.

I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them. Even the guest login's trackpad worked perfectly but not the main admin account.
First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
Solution:
I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions to access the old admin users Library But I chose to boot
from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder BY Host. It has special hidden files. Other way is to copy the Preferences folder we'll say into the Desktop.
I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
I'm leaving this solution because there's someone else in the MacWorld with the same issue.
Ted

Ipod Touch Video Out not working with IOS5?

I normally could play video just fine from my Ipod to my TV and Exercise machine via the ipod plug in on the bottom...however since IOS5...video will play for secs. on the TV then TV goes blank....sound works and the IPOD Touch displays the normal "Vidoe out" screen mode that normally shows when the video is being displayed on the TV. any ideas? any way to revert back to the previous OS?

Downgrading the iOS is not supported by Apple.
What cable are yu using and what is the source of the videos?
Have yu tried another app that supports TV out?

Is there an iPod touch model which will work with a video projector via an HDMI cable?

I want to use an iPod touch to use an app called iSing Worship in our church. This app plays worship songs and enables the lyrics to be projected on a screen using a video projector. Is this possible and if so, which model iPod touch will I need to purchase?

- If that app supports TV out,the app description will say, then you need a 4G or later iPod and the HDMI/Digital adopter cable. You can also use and Apple TV abd Airplay to the Apple TV
- If the app does not suport TV out then you need a 5G iPod since the 5G will mirror the iPpd's screen, Yu then need
- Via Airplay to an Apple TV.
or this cable.
- http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a

HP Pavillion 23tm touch screen does not work with Windows 8

I shipped my ASUS computer for repair and when I got it back the touch screen no longer works.

wilandmari wrote:
I shipped my ASUS computer for repair and when I got it back the touch screen no longer works.
Hi,
ASUS does not make "Pavillion 23tm ", only HP. Anyway, hope no damage after a repair. Please try:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&lc=en&docname=c03488148
Otherwise, ask the repairer to fix it for you.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPod touch 2G does't work with Kenwood car radio anymore

Similar Messages

Maybe you are looking for