IPod Touch 2g/iOs 4.2.1/wifi issue
I have updated my iPod Touch 2G to iOS 4.2.1, it shows the network in range but when i try to connect(entering the WEP code) it shows me 'Unable to connect to the network'.....I can connect to the same network with my PSP and Mobile.
Pls. help out. !
Try:
- Resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then bck on your router
- Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings.
Similar Messages
-
How to fix iPod Touch 4G iOS 6.1.6 lagging issues?
My iPod touch 4g running ios 6.1.6 has been lagging for a while and now I just can't stand it anymore. When I type, the keyboard often takes a long time to update to my taps. All of my games, especially Pixel Gun 3D tend to lag horribly and eventually crash when I tap a button while something currently is frozen end less loading. Even Flappy Bird lags and it makes it even more frustrating to play! Rebooting the device / restoring doesnt help at all. Pls someone help!
I have the same problem :/ its probaly because i might have 8 gb and its not even 8gb!! its 5gb.
-
I have an ipod touch with ios 5.1.1 that wont connect to wifi. what can i do?
have an ipod touch with ios 5.1.1 that wont connect to wifi. what can i do? Ive done a restore, recovery, and still wont connect.
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. Not clear if you did this type of restore
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
When I Lock my iPod Touch 4g iOS 6.1.3, my wifi turns off. whats the problem?
When I Lock my iPod Touch 4g iOS 6.1.3, my wifi turns off. whats the problem? and also it dosent auto lock. . i leave my ipod for 2hrs open, when i came back it still open.
See this previous post.
https://discussions.apple.com/thread/4340955?tstart=0 -
My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
IPod Touch 4gen will not connect to wifi no matter what
My white 8gb iPod Touch 4gen will not connect to wifi, I have reset the network and the entire iPod. When I got it for Christmas 2011 it worked perfectly for a few months then all of a sudden it stopped connecting, every connection I try to connect it to says the same thing; unable to join network... I am getting fed up, my first gen iPod Touch will connect to the wifi no problem, but the thing is it keeps crashing. I can't use it for more than a couple of minutes and it goes back to the home screen. If anyone could help, it is greatly appreciated!
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Can anyone help me? my ipod touch says it is connected to wifi, but it won't run anything that uses wifi like safari or itunes, and I don't know how to fix it
You didn't indicate if it ever worked. If it NEVER did, the problem could be caused by a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required. -
I couldn't find software update Setting-General to update my IOS 4.1 version Ipod touch to IOS 5 or last version. Where can I find? Could you help me please?
You must be running iOS 5 or later for WiFi updating. You must use iTunes. You must have an iPod Touch model that supports at least iOS 5. That means a 3G Touch. See Identifying iPod models.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
My ipod touch will not connect to my wifi, what should i do?
My ipod touch will not connect to my wifi, what should I do?
- Reset the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Do other devices successfully connect to the Internet?
Does the iPod successfully connect to other networks?
Does the iPod see the network(s)? -
IPod touch running IOS 5 won't connect to the Internet
Hi
I have just upated my iPod touch to IOS 5 and now it won't connect to the internet. I've tried to reset network settings in reset (general settings) but it doesn't work. Any solutions out there.
ThanksRestart your WiFi router by powering it off for 30 seconds.
Also read: http://support.apple.com/kb/TS1398
If you need more help please give some details on what make, model, and version router you have and how it is configured. -
I have got an iPod Touch on IOS 5.1.1, which contained my music library, including uploaded CDs and purchases. I have a new laptop (using Windows 7) and upIoaded my music library from the iPod, using Tunejack, onto the laptop. I then made a few purchases but these weren't showing up on my iPod, so in frustration, thinking this would rectify the problem, I then re-booted the iPod, with the result that my entire music library disappeared from it. I then went to sync with my lap top and went in under the 'Music' tab and clicked on download 'entire music library' but nothing happens. I have also tried 'selected playlists, artists, albums and genres' but this has not worked as well. The same issue dows not apply with eitehr my iPad 2 or my iPhone 4S. As mentioned, this music library did come from my iPod so there is no space issue. If anyone has any suggestions i would be grateful.
Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I changed the channel on my Belkin Wireless router now my ipod touch 1G can't find my wifi network?
A few hours ago I changed the channel on my Belkin Wireless router for the 1st time. It was either on auto, or channel 6 before, i'm not sure, but I changed it to 11, and now my ipod touch 1G can't find my wifi network. I tried changing it to 6, but nothing, and I also can't go back to auto. Can someone please help. I've already searched for the network, and it says "Cant find network". I've also restarted my router. I also added the MAC address, still nothing. Other than those things, I havent touched anything else. My ipod could connect before just find. My Wifi is not disabled, and it's not on private. I can connect with other wifi's fine. And I can connect to other networks with my ipod, I also held down the button on top, and the home button for 10 seconds to restart and nothing. I also reset my network settings. Please help!
Find the documentation for your router and look up "Reset to Factory Defaults." This process will put the router back to the way it was when you bought it.
-
my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir -
5th Gen iPod Touch w. iOS 7 not recognized by iTunes 11.1
On Wednesday I updated my 5th gen iPod Touch to iOS 7, and ran the latest iTunes 11.1 update on my MacBook Pro running OS X 10.8.5.
For two days, everything worked fine, but today, when I plug in my fully charged iPod it is not recognized by iTunes.
Some salient facts:
1. My iPod shuffle is recognized by iTunes without problem when I plug it in to any USB port on my Mac.
2. I tried all of Apple's troubleshooting suggestions - restarted iPod and computer, tried connecting to different USB ports on my Mac.
3. My iPod touch will still charge when plugged in to my Mac.
Any ideas? Thanks.I did try all of Apple's troubleshooting suggestions. It was the cable - Thanks for the tip!
It didn't occur to me to suspect that my still-new, Apple-brand cable went bad the same week Apple released two major software updates.
Maybe you are looking for
-
CRM 5.0: EP, UME, SLD etc. Down
HI Experts: This question is a tricky one. I recently finished updating the SPs to the latest level. Everything went through fine. The system also has the latest kernel as well. Now, when i restarted the system up, everything started up fine. Eve
-
The company I work for are looking to purchase Adobe Standard, how many computers can this be installed onto? We need it on three computers so if it is only possible to install it onto two is it possible to install it onto a third computer without ha
-
Xsd:integer - how to set maximum length
Hi, In a structure, I have set some of fields as xsd:integer. my scenario is file to proxy. while generating the inbound proxy, for those elements which are xsd:integer, the data dictionary fields are authomatically set to INT4. Whereas the actual
-
I always have 30+ tabs open. Used to be there were arrows on either side of the tab bar and you could navigate to the start or the end of your tabs. Now those arrows are missing and if you have a lot of tabs open you cannot navigate, you must close a
-
Hi, Please let em know the steps to set up the One step and Automatic approval for SC in SRM 7.0. We are using process controlled workflows. Thanks, Murli