IPod Touch 2G - many apps won't work

I set restrictions on my daughter's iPod and forgot the password. As far as I know, the only way to reset it is by doing a factory restore without a backup from my Mac.
If I do a factory restore on my iPod Touch 2G I am afraid many of my apps, even paid ones will not work anymore since they have since been upgraded and my iTunes does not contain the old versions anymore.
Right now, if the iPod syncs it simply states that some apps could not be installed, but at least it will not delete any of the older (working) ones.
Any advice ?
PS:
I know about Apple's 'we support the current plus 2 generations back' versions, but the Touch 2G is not so much different from the iPhone 3GS and that phone still got the IOS 6 upgrade.
If Apple would at least make IOS 4.3 available for the iPod Touch 2G.

CAUTION
Before you restore the iPod make sure that your iTunes library has the version of apps that are presently installed on your iPod. As you know, many apps have been update and the update apps are not compatible with the 2G iPod. I would do that by deleting the apps from your iTunes library and then transfer them to iTunes. See:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases

Similar Messages

  • My iPod touch 4th generation charger won't work!

    I have a black 4th gen. iPod touch with 5.1 iOS. The charger won't work anymore and I think something is cut in the wire. If I get a new one do I have to pay, if so were can I get one?

    I think you mean the cable.  Yes, that is covered by the warranty that comes with the iPod. I would make an appointment at the Genius Bar of an Apple store. If defective and not abused and within warranty, Apple will replace the cable.

  • New iPod 5 gen and apps won't work, and when I take photos in the camera roll they show up when I click the preview in the left bottom corner but not in the photo album in the photos app, frozen a lot and resets it self a lot when it's frozen! Please help

    My brand new iPod touch 5th gen (silver) i use it a lot and I take really great care if it but just today it's been acting really slow, freezing up all the time, it won't let me open up apps, the notification bar (dragged down) all gone (no markets/weather/noticfications) and never says anything, and the camera. Camera is really bugging me, when you go in the app "camera" I tooka photo, and I went to the left bottom corner and clicked that preview, it shows all the photos there, but it won't let you edit them, share or delete them. But when you go into the photos app, and go to camera roll they aren't there at all.
    When I try to open apps, they freeze and then I try to move/delete them and then it freezes, and stops everything. Shuts down, and restarts and like nothing's happened.
    Please, this is my first iPod and I really care about this so so much. Please somebody help me with something!!!! Please!!!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    - Reset all settings  Already sugested
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Ipod touch 5th Gen App Store not working

    I just reset my ipod touch and I am trying to login to the App Store, I am already logged into my icloud that I used before resetting my ipod, I tried to log in but it said it didn't exist, so I got on my laptop and made a new account, and when I tried to log in, again it said it didn't exist. So I decided to try and make a new one again on my phone, but everytime I typed in an email it said it existed already I even typed in random letters and numbers several times and it still says the ID is in use.I am going on a vacation soon and I want games to play

    What was the exact working of the message? "didn't exist," does not seem like an error mssage.
    Does the iPod connect to the internet via Safari?

  • I updated my ipod touch and now it won't work but itunes says everything is fine. What should I do?

    I was updating my itouch that I got in September to the IOS 5 and everything went fine until the end of the update when it was creating a new back-up of the information on the itouch. When I saw that it didn't work and it told me to restore the previous bakc-up I tried that, but nothing happened. Itunes was doing a lot of work but my ipod touch didn't show that anything was happening. My ipod touch wants me to go back through the set up and when it gets to the part where you can restore a previous back-up I tell it to do that. The problem then is that it tells you to connect it to itunes and I do but the itouch doesn't seem to realize that it is plugged into itunes. Then I try to restore the old back-up form itunes and it immeadiately pops up saying htat it can't because of error: ipod (-50).

    Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
    Above from:
    http://support.apple.com/kb/TS3694

  • IPod Touch 4G Wi-Fi Won't Work

    Hi!
    My iPod Touch 4g always worked perfectly with everyone their Wi-Fi ( Summervacation USA: wifi worked, other places in Holland: wifi works )except at my own Network/Router/Wifi thingy... :
    1. I click on settings
    2. Click on Wifi
    3. Connecting to my Router / Wifi thingy / Network  ( Including typing right password )
    4. It got connected, even has the wifi icon next to iPod ( what's standing above left , sry for my horrible english ) that shows Im connected.
    5. When I click on Safari it keeps saying: NO CONNECTION, also Facetime, e-mail, Twitter, MSN....IT wont work
    Also something that looks like a circle keeps spinning around next to the name of my Network...
    But the network is working perfectly fine, my laptop is connected to the same and here the internet does work... BUT FOR MY IPOD TOUCH 4G......:( IT SOOO FRUSTRATING!!
    Hope someone has an answer for this cuz im just hopeless... PLEASE HELP ME

    Try:
    - Resetting the iPOd. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • HT1438 ipod touch got wet and won't work

    My daughter dropped her ipod in the toilet...nice...now it won't work properly even after we dried it off and put the ipod in rice overnight.
    Any advice would be helpful. Thanks!

    Overnight probably don't do any good. Let it dry in rice for three or four days at least. Then try the iPod again. If it will fails, it's almost certainly damaged and you'll have to take or send it to Apple and pay their out-of-warranty replacement charge.
    Regards.

  • I updated my iPod and my perchased apps won't work, what's wrong with it?

    I just updated my iPod touch to iOS 6.1.2 and I wanted to download an app that I've perchased a long time ago, we'll I forgot the name of the app and I went to my purchased apps and it doesn't load my perchased apps, it kicks me off every time. CAN THIS BE FIXED?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App Stores and sign out and sign back in
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • New iPod touch 5th generation charger won't work with computers or USB power adapter?

    I just got this charger less than two weeks ago and just yesterday it started saying "This cable or accessory is not certified and may not work on this iPod." It will only work on some occasions, but most of the time it won't. Other times it will show that it is charging, but when I select to "Trust" my computer it stops charging. When I plug it into the USB power adapter, it rarely works (even when I try it in different outlets.) Any way to solve this issue?

    If a non-Apple cable and the place will not take it back then:
    USB Power Adapter Takeback Program

  • IPod touch 4G FaceTime/Message won't work

    I have been trying for a while it get my son's iPod 4G to work with FaceTime but have had problems.
    I click FaceTime, hit the button that says "get started"
    Sign in and get to, "people will call you using this email address"
    I click "next", it says "verifying" then goes back to the sign in screen?
    My other son's iPod 4G works just fine.
    Any ideas?
    Thanks for your help. :)

    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    iOS: Troubleshooting FaceTime and iMessage activation

  • HT201210 Can the OS for an iPod Touch be updated beyond 3.1.3?  iTunes tells me that this is the latest software but many apps won't run on this older os.

    Can the OS for an iPod Touch be updated beyond 3.1.3?  iTunes tells me that this is the latest software but many apps won't run on this older os.

    If you have a 1G (first generation) iPod touch then it can only go to iOS 3.1.3. To identify yours:
    Identifying iPod models
    If you need a higher iOS, you will have to get a newer model iPod.

  • TS2771 I have the iPod Touch 2G and for some reason half of my apps won't work.

    I have the iPod Touch 2G and for some reason half of my apps won't work.

    - Reset the iPod, nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Purchase/install any new app
    - The remaining items of:
    iOS: Troubleshooting applications purchased from the App Store
    - Last, restore the iPod

  • I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

    I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

    Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
    NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
    The above is from:
    http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/

  • I just recently got an iPod touch 5 and it won't let me download apps. It says they are free but when I install it , it keeps popping up saying before purchasing I must tap continue to verify my purchase something like that. Idk what to do. !!!!!

    I just recently got an iPod touch 5 and it won't let me download apps. It says they are free but when I install it , it keeps popping up saying before purchasing I must tap continue to verify my purchase something like that. Idk what to do. !!!!!

    Yes. You can set the payment method to "None" once you log into iTunes on your PC/Mac. I have it set up this way.

  • My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel, I tried the method where you hold the home and lock button lots of times and it hasn't worked! What do I do?

    My question won't all fit in but it says 'My iPod Touch 4th Generation 8gb won't turn on and is frozen on the loading symbol/wheel. What do I do?'
    I've had this problem from about two weeks and I forgot about it, but today I wanted to play on it and remembered that it's not working, I've tried connecting it to iTunes via my laptop but I'm not to sure how to update it because I thought that might fix it, but no luck. I've tried the trick where you hold the lock and home button but nothing happened apart from it just went back to the apple logo and then to the frozen loading symbol/wheel. I need help!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Brand new iPod touch did not come with iOS 8

    Just got a new 16 GB 5th Generation iPod touch.  Not only does it not have iOS 8, I cannot get it to update from 7.1.2.  Why is Apple advertising the latest iOS on these devices but selling them with an older operating system?  Did they actually sell

  • Unplugging headphones causes reboot !!....help nee

    Any help on the below problem would be greatly appreciated: Product: Sound Blaster Audigy 2 ZS Platinum Self Description : Advance PC User Memory : 023 MB OS : Windows XP Professional Service Pack 2(5..2600 DirectX 9.0c Whenever I unplug my headphone

  • How to display 'Alpha numeric values' in lower character?

    Hi, We have 'Alpha numeric value' in one column and i need to display alphabets in lower character. I tried but throwing error. SQL> select * from a439487.ora_dev_inventory; HOST_NM HA INV_DT SMMK94 - 21-AUG-08 SQL> select to_lower(HOST_NM) from a439

  • Width BarCode

    Hello everybody, I need a little help. I'm putting together a SapScript based J_1B_BOLETO_ITAU first problem was with the printing of bar code, because it does not leave. Now this DLL and prints to set straight the test of SO10, however Boleto both t

  • Inserting Multiple Rows

    Hi, I'm just evaluating Numbers and I can't figure out how to insert multiple rows within a set of existing rows. I can see how to add a single row above or below a row, but not how to open up a block to insert multiple rows. Many thanks, Jonathan