Ipod touch 2g speakers not working Please help me!!!!!!

ok so i got my ipod for christmas the loud speaker has been working great. I dnt use it that often. Just 2 days ago, it stopped working. Like the clicking sound fro the keyboards, alarms, and even music wouldnt work. Today the clicking sound came back but went again. I tried a reset and restore. still nothing. I noticed that everytime i turn off the volume and i go to music or anything that involves volume, the volume automatically adjusts to full. i dnt know if this is normal. Please help me!!

I'm sorry for that but I guess you have to say good buy to your old friend...
I have just received my third iPod touch that already has some new problems just to annoy me(of the conection-prolems sort).
This is definetly a hardware problem! But you could try to be sure that nothing is left in your headphone jack. And your volume problem is weird but not unusual.
(Excuse my bad english please)
Oh and try to set the volume settings to adapt to one level.
Another reason could be a faulty volume rocker switch.

Similar Messages

  • Ipod touch iTunes is not working! Help

    So when I go to iTunes on my iPod touch and I hit featured on the bottom it says iTunes is temporarily unavalable but when I searched a song I was able to buy it. And when I go to I tunes on my computer it works perfectly. Is it my iPod or iTunes. Help please!

    - Try here:
    iOS: Device not recognized in iTunes for Windows
    - Next try a different computer to help determine if you have a computer or iPod problem.

  • Speakers not working. please help!

    When i plug my ipod into the speakers, it doesn't read the ipod. Could the contacts be broken?

    WHen you say plug do you mean via the headphone jack? Via the dock connector?
    DId it start after updating to iOS 5?  Some does do not seem compatible with iOS 5.
    Have you tried the standared fixs:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Restorefrom backup
    - Restore to factory defaults/new iPod

  • IPod Touch 16Gb Screen Not Responding - Please Help

    I bought my 16Gb first gen iPod Touch in November 2007 and its been a champ ever since....until today.
    For some reason the touch screen has just stopped responding to any commands (initially the slide to unlock worked but it wouldn't accept a password input and now it doesn't even allow the slide to unlock to work). It was on firmware 3.01 when it originally happened but I have since put it into DFU mode and updated to 3.12. Unfortunately this has made no difference to the problem and I've even tried downgrading to 2.2.1 but that process failed too.
    Can anyone help?

    i know this bug. -.-
    my ipod had it too.
    I sent it to a firma which repaired it.
    besides here you can get a protect case for your ipod. ;D
    http://tinyurl.com/yduokzn

  • The scroll in touch pad is not working. please help

    i owned hp pavilion dm1, windows 7-64 bit. this happened before. i have to open the mouse window just to make the scrolls work. i asked before about this and someone advised me to uninstall it and install the latest synaptics driver. can i have the link where i can download the latest synaptics driver? or any other advice so this would never happen again? i can't just trust any links so please help me. thanks
    This question was solved.
    View Solution.

    Hi,
    First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53857.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, restart the notebook.
    When windows has fully reloaded, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    You may now need to enable scrolling again - this is described under the sub-heading 'Adjust horizontal and vertical scrolling' on This Document.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1320 i have tried all of the above to reset my 30gb ipod but its still not working, please help

    Hi, i have a ipod classic, it now wont turn on or do anything, i have charged it, toggled the HOLD button and tried all the suggested press and hold, but nothing. Ive tried conecting it to the computer via a USB cable again nothing, its not even showing on my Itunes account when thats turned on.
    Any one got any ideas, TIM

    Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life.  By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
    iPod won't turn on
    B-rock

  • Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    Then try a different computer to help determine if yo have an IPod or computer problem.

  • My ipod touch microphone is not working ,i restore new os but still in mute ,please help

    my ipod touch microphone is not working ,i restore new os but still in mute ,
    and suddenly it  gets shut down.
    please help

    Try here:
    iPod touch: Hardware troubleshooting
    You can make an appointment at the Genius Br of an Apple store and hear what they have to say.

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • HT5467 My location services in iPod Touch 5 is not working. Any help?? I really want to fix this issue.

    My location services in iPod Touch 5 is not working. Any help?? I really want to fix this issue.

    You do have it turned on ins settings>Privacy, right?
    For location the iPod uses the location of nearby wifi routers that are in Apple's database. You do not have to be connected to the network/router to use that router's location. Thus, it appears that the iPod can't see a nearby router that is in Apple's database. Apple continuously updated their database based on info they obtain from iPhones. No one has been able to find a way to inform Apple of a router or correct is location.
    You can confirm that by going to place with a know located router like Starbucks or McDonalds

  • Some buttons on the right hand screen of my ipod are not working please help me!! what do i do, some buttons on the right hand screen of my ipod are not working please help me!! what do i do

    some buttons on the right hand of my ipod touch screen are not working? could somebody help me i have reset restored and everything has this happened to anyone else?

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • The speakers of my ipod touch 3g are not working. I alrady restarted it but that didn't work

    The speakers of my ipod touch 3g are not working. I alrady restarted it but that didn't work

    Try:
    - Inserting/removing the headphone plug or dozen times or so. Try cleaning out/blowing out the headphone jack:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. You likely have a bad headphone jack
    Apple Retail Store - Genius Bar

  • I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

    I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

    An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
    The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer:  Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • My Ipod touch apps are not working.

    My Ipod touch apps are not working. They attempt to appear but it seems like something is stopping them. They show up for less than a second then dissappear. Also all of my synced music dissappeared as well. I'm not sure if that is something in common?? I've tried resetting my ipod. I never link it to a computer, and that is why I synced my music from a friend. Please help me!

    Sorry I mean that I reset my settings. I havent reset the whole i pod. I want to try to keep all of my apps.

  • I have bought  three iPhone 6  one for me and one each for my two kids  we have just done the update iOS 8.01 now all phone  do not connect to service provider and touch id is not working ,  APPLE HELP !!!!

    i phones  updated iso 8.01 all three phones  will not connect to service provider and touch id
    will not work  APPLE HELP !!!!!!!!!
    anyone know  i fix as  i have spent over 2000 pound on three phones that won't work
    all three where working fine until the 8.01 update

    Apple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
    Update:
    Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch.

Maybe you are looking for

  • Data template error while viewing DataSet

    Hi, I am trying to view DataSet{DS2}. The dataset is of type "Data template" {DT1} Pl. find below data template xml pasted in the text field <dataTemplate name="DT1" description="Application Details" dataSourceRef="dev100">      <parameters>         

  • I get prompted to select a scanner and a scan profile/preset each time I try to scan a document to PDF using Adobe Acrobat Pro.

    Hello, I have a fujitsu scanner (fi-6140) connected to my computer and have the "Scan" button on the scanner associated with Adobe Acrobat.  And so when I press the "Scan" button on the scanner to scan a document, it launches Adobe Acrobat Pro automa

  • Change all page templates in one go

    Hi, Is it possible to change all page templates in all applications in 1 go, we have 100s of applications and want to change the titile tag from <title>#TITLE#</title> to <title>#TITLE# - #APP_VERSION#</title> Thanks in advance. Graham

  • HR (Planning database) Does the account type matter when suppressing rows?

    Does the account type matter when using the Advanced Options row suppression? The report will suppress all the 0 rows if the suppression is based on a column with a Planning acct type "Revenue", but it doesn't do anything if the suppression is based

  • MobiGenie

    Can anyone explain to me what this program is all about? So once I have this installed and working I can cancel my voicemail service from my provider or is this a program to simply manage your voicemail through your phone? Thanks