IPod Touch 2G wouldn't connect to iTunes, now won't work at all.
After updating my iTunes to iTunes 10 and upgrading to iOS 4, my iTunes wouldn't recognize my iPod. I tried to put it in recovery mode in order to restore it, but whenever I go to restore it, it stops part way through with some random error. So now I have an essentially useless iPod. How can I make this work again?!
I have a 2 g nano and the only way I can get itunes to see it is to connect it to my pc, have iTunes open, and then restart the nano. On the touch you'd do this by pressing your Home & Sleep buttons both for about 10 secs.
Try that or [Unable to update or restore|http://support.apple.com/kb/HT1808] and see if it works. You will still need to restore it but maybe it will complete it this way.
Similar Messages
-
My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I updated my ipod but it failed....
Now my Ipod touch is showing a connect to itunes image. When I connected it to itunes it said that I need to "Restore it". But I have video on it that I really, really need. How do I do this without loosing all of my footage and photos?
Please help!?You do not. You have to restore the iPod. You can then restoe from backup and get to where you were when the the last backups was made.
-
my ipod touch is showing the "connect to itunes" screen.. and on connecting to itunes and clicking on "restore" it shows error 3014.. what do i do?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
my ipod touch says "activation required, Connect to itunes" i restored it with on my itunes and it seems to be working again, after i tried connecting to my wifi with no luck i reset it, and again it pops back "activation required, connect to itunes" i restored again, its a non ending cycle, and it makes no sense having my ipod and i cannot connect to the internet with it, can someone please help with this issue?
Maybe here:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next would be to make an appointment at the Genius Bar of an Apple store. -
Ipod touch says its dissabled connect ti itunes but wont open up
ipod touch says its dissabled connect to itunes but wont open up
Try to connect in recovery mode, described here: http://support.apple.com/kb/HT1808
-
My iPod touch told me to connect to iTunes because it was disabled, but when I plugged it in, it said that there was a passcode that was needed to be unlocked. But I cant unlock it because it is disabled. What do I do?
Place the iPod in Recovery mode and then connect to yuor computer and restore via iTunes.
-
Hi, I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn't show up either in itunes or finder. I can't be the first to have experienced this problem. please could someone advise me.
What iOS do you have on the iPod?
Did it every connect to your computer with that iOS?
The latest iOD for the 2G is 4.2.1 and that required a Mac with 10.5.8 or later.
Have you tried:
- another USB port and cable
- iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
my ipod touch 2nd generation wont connect to itunes. my computer says it is connected, but has no drivers. what does this mean and how do i fix it?
Start here. See the driver topic first.
iOS: Device not recognized in iTunes for Windows -
I recently purchased a new laptop after my old one ceased to function. Therefore, I had lost ,my old iTunes, and my iPod is no longer authorized by a functioning computer. I downloaded the latest version of iTunes, plugged my iPod in, and tried to install the new iPod Touch software update. I got the error message that the installation had failed, and iTunes automatically ejected my iPod, leaving it in the "connect to iTunes" screen, in which it has been stuck ever since (about 9 days now). I have uninstalled and re-installed iTunes, have rebooted my computer numerous times, I have tried various holdings of the power button and home button as recommended on several help forums, etc. to no avail. I am using a Windows 7 (64-bit) system on a brand new HP Pavilion dm4 laptop with plenty of space and the newest version of iTunes installed. My iPod Touch (3G) is not being recognized by iTunes or by my laptop. I would like to, if possible, restore my iPod to original factory settings so that it can be authorized on my new laptop and will sync approrpiately. Any help anyone can provide will be immensely appreciated. Thank you.
Also, the iTunes is the version for a 64-bit Windows OS.- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
I have a brand new ipod touch and it wont connect to itunes or my computer!!??
I have a brand new ipod touch however when I connect it to my computer, itunes does not recognise it and neither does my computer. The drivers have downloaded and are showing working. I have tried uninstalling and re-installing itunes as discussed in support centre however nothing seems to work. The ipod itself just has the connect to the computer on the screen, is fully charged and when plugged in a little lock sign comes up for a second or two above the itunes icon!!! Let me know if you have any further suggestions please.
Thanx for you suggestions, I used my old xp laptop...update software and my ipod connected however the memory is not large enough to hold my itunes library so I could see it was not the cable or the ipod at fault.
I have tried to connect to my vista laptop again and have tried all of the suggestions in troubleshooting again...I have even upgraded to windows 7 to see if that cleared the problem....and....my computer has located my ipod but is only recognising it as a digital camera so back to the drawing board...
Please have you any other suggestions??? -
IPod Touch 3rdGen stuck in connect to itunes mode and driver missing
Ok what happened was I wasn't at my own house and and I wanted to put some new music on my iPod touch 3rd Generation. I had to update to the new itunes first. Then once I was finished I remembered I had to update my iPod touch so I clicked on update. Then at some point the ipod screen had the USB connect to itunes and a window comes up saying Windows needs to install driver software for your apple mobile device ( recovery mode ) and my computer cant find it. I have went into the device manager and when i click on properties for the apple mobile device recovery clicked properties and in the device status box it sais
"This device is not configured correctly. (Code 1)
There is no driver selected for the device information set or element.
To reinstall the drivers for this device, click Reinstall Driver."
I have looked to re download the drivers and I can't find them. The other problem is my primary computer is not working and if i have to completely reset my ipod i will lose practically everything because I have a feeling my primary laptop is getting reset.
So to conclude it's really saying my apple mobile device recovery mode is there, but there is not a driver installed to it.- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Ipod touch shows picture to connect to itunes but,
The ipod touch won't turn on, it just shows a picture to connect to itunes. But when I try to connect to itunes it won't connect because it says the ipod is locked with a passcode. What do I do??
I was able to find an answer by browsing similar questions. I had to connect in recovery mode, then restore the ipod.
-
Can anyone help me? my ipod touch says it is connected to wifi, but it won't run anything that uses wifi like safari or itunes, and I don't know how to fix it
You didn't indicate if it ever worked. If it NEVER did, the problem could be caused by a firewall in the router. For reasons that I do not understand, that will affect IOS (iPod/iPad) communication but will not affect computers or other devices.
You will need administrative access to the router. If a firewall is present, turn it off and test the iPod again. If it works, turn the firewall back on but weaken it a notch and test the iPod again. Repeat as required. -
Updated iPod touch (4th gen) to iOS 6 and iMessage won't work.
This morning I upgraded my 4th generation iPod touch to the new iOS 6, since then everything has worked fine except for iMessage. I went out to a few places with wifi and iMessage worked just fine, got back home and back on my wifi and it no longer worked. Any ideas on what I can do to fix this? Apparently my iMessage will only work on every wifi network but my own now since the update. Any ideas are appreciated...I am beyond frustrated at this point.
I have been having the same problem. My iMessage will work every now and then but the majority of the time it does not. I have restored my iPod twice and I am still having the same problem.
Maybe you are looking for
-
Exchange 2010 DAG backup & Transaction logs
Hi, What is Microsoft recommended best practise for Exchange DAG group backup in an environment where there are Active & multiple (2-3) passive copies of the databases? Is it a good practice to backup transaction logs as frequently as possible in ad
-
Time machine just went and deleted 500 gigs of data !!
I performed a clean install and was slowly but surely restoring all apps and configurations by drag and dropping items from Time Machine backups. My backup HD is 1 TB. Overnight TM performed a backup and deleted almost all backups made over time. I'm
-
My trackpad works fine for scrolling, but when I want to click on anything, I cant. help!
I havent done anything to make it angry. One minute it was clicking fine, and now it does not work!
-
I know this is an Excel forum but I don't know where else to ask this. We have a database that has been used for quite a few years. Over the years, this guy or that guy created tables and/or queries. I'm now tasked with trying to clean it up. Is ther
-
Do I need an internet conection?
I just paid for Adobe Creations for students and installed Photoshop, Dreamweaver, and Bridge, my questionis, now that I downloaded them, do I still need the internet to use them or can I do it offline?