Ipod touch (2nd gen) is disabled, computer crashed , cannot connect to itunes without password but ipod says disabled. Help?

I have tried a hard start, holding home button and on/off button at same time. Nothing! just says" ipod is disabled connect to itunes".

See if this program will get the iPod in recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
If not successful than time for an appointment at the Genius Bar of an Apple store.

Similar Messages

  • I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck.  However...
    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I broke the screen on my ipod touch 4th gen and im trying to do a backup on the data but it says i need to enter a passcode on my ipod but the screen dosent work so what can i do

    hey i broke the screen on my ipod touch 4th Gen and im trying to do a backup on the data but it says I need to enter a passcode on my ipod but the screen dosent work so what can I do.

    You can't backup the iPod t iTunes then. You will have to use an existing iTunes backup.
    If iCloud backup is turned on and the iPod is still working (not disabled), the iPod will automatically backup daily if an internet connection is available and the iPod is connected to a charging source.

  • My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

    My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

    My ipod touch is not working and it won't connect to itunes either what do I do? HELP PLEASE!!!

  • When i Put my Ipod Touch 2nd gen in my computer it says Apple Mobile Device Service has stopped working and does not show up in itunes Help?

    well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
    ipod touch 2nd gen
    http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png

    Try this:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • I just replaced my ipod touch 2nd gen with another how can i get my itunes back

    i just replaced my ipod touch 2nd gen with the same model and cant seem to get my iyunes back

    Don't understand question, Changing iPod shouldn't affect iTunes on the computer you sync with.  Plug in new iPod, it should take you through some screens of options asking how you want to setup the new iPod.
    Just did this when going from 7+ year old iPod video to iPod Touch 5th gen.

  • Ipod touch 2nd gen. and different Computer.

    Hello, I just found my old ipod touch 2nd generation, I plugged it on my mac (not the main pc of the ipod) and it says that there's a new update is availlable. If a accept to load the update, does my ipod will sync with my Iphone's library that's on my mac?? 'Cause there is some music I would like to keep and those songs aren't on my mac!
    Don't know if you understood but thanks for helping me if you do!

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

  • My Ipod touch 2nd gen will not sync for some reason to itunes. I've tried almost every possible solution I can find on the internet. The ipod charges fine when connected and Windows also recognizes it as a device but itunes refuses to. What should I do?

    Any help would be greatly appreciated.

    Thank you for the reply. Your answer crossed my mind but I havent downloaded songs in a while so I never paid attention to whether it was syncing or not. However, in my sync history I see that it successfully synced 3 months ago....

  • Why is my wifi on my ipod touch 2nd gen not working?

    Can someone help with the wifi on my ipod touch 2nd Gen? Yesterday it suddenly stopped connecting to anything wifi. No settings were changed. The only thing I did was go to itunes for the first time in well, forever. I always use it on my computer to go in itunes, not my ipod. Anyway, I'm pretty sure I could still get on Safari after that but I don't really remember. At some point in the evening it stopped connecting. I can't get on Safari, my mail won't refresh, it would connect to the app store, nothing. Sometimes a message does pop up saying there was a problem connecting to the server. I can't figure this out, internet on my computer is running perfectly fine. My ipod wifi is on, airplane mode off. When I go into my settings it shows my network and that it's connected. I haven't connected it or synced it to the new itunes. I actually haven't downloaded the update yet. Ipod is up to date though without the new sync. Can anyone help me out? I'm very confused.
    Thanks

    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • The music on my ipod touch (2nd gen) is showing on itunes, but not on my ipod.

    I plugged my ipod touch (2nd gen) into my computer to charge it over night. When I woke up and disconnected it, there was only three songs on it. I then plugged it back in and it said that all 1700 were there. I dont know what to do, PLEASE HELP!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • IPod Touch 4th Gen won't connect to my computer, charge or connect to iTunes.

    Okay, here is the issue. My computer runs Windows Vista. Ever since I have updated iTunes to 11.0.2, my iPod touch hasn't been able to connect to the computer at all. I don't know if there is any correlation between the update and my issue, but I need someone to be the judge of that. Apple has suggested that you uninstall iTunes, QuickTime, etc. restart the computer and then reinstall them. So I have done that multiple times, and my iPod still won't connect to the computer. My sister's iPod touch, 4th gen just like mine won't connect to iTunes or the computer either. I have spent a lot of time looking up possible solutions, but none of them work at all. I've done everything Apple suggests in troubleshooting and such, but nothing works. I was hoping someone else might be able to give me a solution. One that hopefully does not involve uninstalling and reinstalling Apples programs, which I have done several times.
    I have tried all accessable USB ports on my computer, and I have switched between the four different USB cords that we have, so this isn't the issue. My PS Vita will connect to the computer with no issue at all, so it isn't the USB ports either. I can plug my iPod Touch into my PS3 and it will charge the instant I plug either end of the cable in, the same for my sister's. I can plug it into the dock on my mother's alarm clock and it will charge just fine. I'm open to any suggestion, so please help me out here.
    -Jay

    So you tried everything here:
    iOS: Device not recognized in iTunes for Windows
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Try connecting to another computer to help determine if you have an iPod or computer problem.

  • 8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

    I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
    Any idea what I can do to fix this?

    you can connect the iPod to iTunes in recovery mode:
    Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
    Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
    After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
    and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

  • Ipod Touch (2nd gen) drawing too much power, disable USB?

    Earlier today, when my iPod Touch (2nd gen) was syncing with iTunes, it disconnected and this error message popped up:
    Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. 
    To prevent damaging your computer, the USB device darwing too much power has been disabled. When you disconnect the device drawing to much power, your other USB devices will be enabled again.
    Now, my Ipod will not sync or charge. I've tried connecting other USB devices (cell phone, wireless mouse and ehd) and get the same message. I've tried a few suggestions online like: restarting/shutting down the computer, restarting the IPod, resetting the SMC, PRAM and NVRAM. None of these worked. I've connected my iPod to my roommate's iMac and it connected with no problem. Is there anything else I can do before using the Genius bar?
    Macbook Pro 5,3
    Intel core duo
    4gb memory
    ipod touch 2nd gen
    firmware 4.2.1

    You have a MacBook problem since it happens with all your USB accessories.  I suggest you post in the MacBook forum. I do not have a MacBook so I have no ideal about the problem.

  • IPod Touch (2nd gen) not recognized by computer and iTunes

    When I connect my iPod Touch to my laptop, running Windows 7, neither the computer nor iTunes recognizes my iPod. Everything worked before with Vista.
    When I plug the iPod into the computer the iPod does turn on put the battery doesn't charge and the iPod does not show on the Device Manager.
    I have gone through and uninstalled and the reinstalled iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application support. With no positive result. In fact I have done it twice.
    In going back to make sure everything had installed I have noticed several things.
    The Apple Software Update, Bonjour, iTunes folders and Common Files are located in Program Files(x86) There are also copies of the Bonjour, iPod, Common Files, and iTunes folders are also located in the Program Files folder. Are these file locations correct?
    Also, I have read somewhere that there should be usbaapl.cab, usbaapl.inf, usbaapl.sys files. I can't find any of these file. Are these files necessary?
    Any help will be appreciated.

    greetings rkonrv and welcome to Apple discussions !
    it seems your have seen this KG then.
    maybe this tip by Beebopp (though a little off topic) will provide some pointers:
    +This solution is very similar to one above but worked for me. Am using iPod Touch 2nd Gen with 32 bit version of Windows Vista where the iTouch is being seen by Windows but does not show in iTunes. In my case it was being identified by Windows as a camera. I tried un-installing and re-installing iTunes and all the other Apple apps with no luck. Was almost ready to throw in the towel when I did one last search for alternate solutions and found the following instructions to reinstall the drivers, but instead of having the system look to the c:\Windows\inf or c:\windows\system 32 folders for the drivers, the path is changed to C:\program files\common files\Apple\Apple Mobile Support\Drivers, which is apparently where Vista installs the drivers. Once I changed the path the driver properly reflected the iTouch as a USB device, and not a digital camera. Try this if you are having similiar issues.+
    +Here are the steps:+
    +1. Verify you have the following files usbaapl.cat, usbaapl.inf & usbaapl.sys in the following directory "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"+
    +2. Log in using an ADMINISTRATIVE account+
    +3. Single left click on START+
    +4. Single left click on RUN (You may need to change the start menu to 'classic view' to see RUN, you can change back after if you like)+
    +5. Type in " devmgmt.msc " then hit Enter (Don't type in the quotes)+
    +6. Look for Imaging in the Device Manager window, and click on plus sign (In Vista you may not see the "Imaging" option. Look under "Portable Devices" as an alternative)+
    +7. Now you should see " Apple iPod " as a device underneath Imaging (or Portable Devices)+
    +8. Right click on " Apple iPod " then single left click on Properties+
    +9. Single left click on the " Driver " tab+
    +10. Single left click on " Update driver "+
    +11. Select " Install from a list or specific location " or "Browse my computer" whichever shows on your version of Vista+
    +12. Single left click on " Include this location in the search " if shown+
    +13. Paste " C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers " (Don't type in the quotes) into the box " Include this location in the search "+
    +14. Single left click NEXT and keep clicking through until " Apple iPod USB Driver " is detected, if no list appears then you should see the little animated circle thingie spinning. It's looking and working. Be patient.+
    +15. Hopefully you will get a successful message.+
    +16. The correct drivers(s) are now installed.+
    +17. Start up iTunes, and see if you iPod is detected again.+
    good luck !

  • I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.  When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

    I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
    When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
    I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
    I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
    nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Low Index Score?

    I just finished installing vista ultimate 64-bit via bootcamp after spending about 2-3 hours hunting for drivers and now everything works! I can even control 2 out of the 4 fans! Now comes the moment to shine--the test. It logged in fine and the test

  • Small sizeselection always prints color on 2710 All-in-one

    Bout invitations from www.willtonprint.com, and the size of the invitation is 5.5 by 8.5. Using the website to print, it comes out perfect using regular paper. When I stick the invitation size paper in, the printer complains about unexpected size and

  • Certificate problem,plz help

    I am a nokia 3500c user. When i install a signed application or an original application such as gmail or bitstream bolt, my phone displays 'certificate not on phone or sim' what should i do ? Moderator's note: Contact number and Email address removed

  • Am I able to use iCloud for apps etc?...

    My son has the iPhone 5c 8GB but the storage is rubbish, he's constantly having to delete stuff to free up some space, I can get him 20GB of extra storage for 79p a month, will he be able to use that storage for apps, music, photos etc?

  • Output determination and Printer determination for  both PO and GR

    Dear all, Can anyone please help me in congiguring the output determination and printer determination for  both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration. Thanks & Warm Regards Somasheka