Ipod touch 2nd gen usb power adapter model

i wanna know the model of my usb power adapter that comes with my ipod touch 2nd gen model a1288..it's already erased that's..i wanna know the output ampere and voltage..thank you

No iPod touches came with a wall charger. You would have had to purchase it separately. As I saidm one with at least 500 ma will work. 1000 ma (1 amp) sime to be standare for phones and iPods.

Similar Messages

  • I just replaced my ipod touch 2nd gen with another how can i get my itunes back

    i just replaced my ipod touch 2nd gen with the same model and cant seem to get my iyunes back

    Don't understand question, Changing iPod shouldn't affect iTunes on the computer you sync with.  Plug in new iPod, it should take you through some screens of options asking how you want to setup the new iPod.
    Just did this when going from 7+ year old iPod video to iPod Touch 5th gen.

  • Ipod Touch (2nd gen) drawing too much power, disable USB?

    Earlier today, when my iPod Touch (2nd gen) was syncing with iTunes, it disconnected and this error message popped up:
    Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. 
    To prevent damaging your computer, the USB device darwing too much power has been disabled. When you disconnect the device drawing to much power, your other USB devices will be enabled again.
    Now, my Ipod will not sync or charge. I've tried connecting other USB devices (cell phone, wireless mouse and ehd) and get the same message. I've tried a few suggestions online like: restarting/shutting down the computer, restarting the IPod, resetting the SMC, PRAM and NVRAM. None of these worked. I've connected my iPod to my roommate's iMac and it connected with no problem. Is there anything else I can do before using the Genius bar?
    Macbook Pro 5,3
    Intel core duo
    4gb memory
    ipod touch 2nd gen
    firmware 4.2.1

    You have a MacBook problem since it happens with all your USB accessories.  I suggest you post in the MacBook forum. I do not have a MacBook so I have no ideal about the problem.

  • I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.  When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right h

    I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
    When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
    I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
    I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
    nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch 2nd gen 8 gb won't boot! (I did hold home and power)

    So my ipod touch 2nd gen 8 gb won't boot. It never really fell on the ground it was not jailbroken and I had it for almost a year. Yes I have googled it, yes I holded home and power button at the same time,  basically did almost everything possible. I'm thinking it's the battery but might be something else. If you recognize this problem and know how to solve it, please reply here. I also can't connect to itunes in case your wondering

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I need to downgrade my ipod touch 2nd gen Mc model back to 3.1.3 because that is what my default firmware was when i first bought it. iOS 4.2.1 is slow on my ipod, is there a way maybe if apple can reset my ipod touch back to 3.1.3?

    is there a way if apple can reset my ipod touch 2nd gen MC model back to 3.1.3? because iOS 4.2.1 is slow on my ipod and i cant deal with also i cannot afford a new ipod at the moment. also 3.1.3 was my default iOS when i first activated my ipod touch. I bought it in December in 2009

    "You can restore to Factory Default which should go back to the original system"
    This will not work..
    A restore will always install the latest available software.
    Again, there is NO legit way to go back at all.

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • Today i bought a preowned ipod touch 2nd gen and i restarted it so i could go on app store on my account and that so i go on settings and restart and erase everything and now it comes up with a usb pointing at the itunes logo what do i do

    today i bought a preoned ipod touch 2nd gen and i restarted and erased everything so i can go on app store and that and now it just shows a picture of a usb pointing at the itunes logo what do i do

    Connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software

  • I have lost my photos from my PC. I have them only on an iPod Touch 2nd Gen.

    I have lost my photos from my PC.
    I have them only on an iPod Touch 2nd Gen.
    How can I copy them from the iPod Touch 2nd Gen to my PC?
    The software version on the ipod 2nd Generation is 3.1.1(7C145).
    I would very much appreciate help in this regard.
    Thanks

    If the photos were synced to the iPod;
    - you need a third-party program like TouchCopy or Phone view to copy them to another computer.
    - Email them to the computer
    - See it there is an app available that will transfer them to your computer. However, there may not be any compatible with your model iPod and its iOS. There is the Photo Transfer app but that requires iOS 4.3 or above but your 2G iPod can only go as high as 4.2.1

  • Why is my wifi on my ipod touch 2nd gen not working?

    Can someone help with the wifi on my ipod touch 2nd Gen? Yesterday it suddenly stopped connecting to anything wifi. No settings were changed. The only thing I did was go to itunes for the first time in well, forever. I always use it on my computer to go in itunes, not my ipod. Anyway, I'm pretty sure I could still get on Safari after that but I don't really remember. At some point in the evening it stopped connecting. I can't get on Safari, my mail won't refresh, it would connect to the app store, nothing. Sometimes a message does pop up saying there was a problem connecting to the server. I can't figure this out, internet on my computer is running perfectly fine. My ipod wifi is on, airplane mode off. When I go into my settings it shows my network and that it's connected. I haven't connected it or synced it to the new itunes. I actually haven't downloaded the update yet. Ipod is up to date though without the new sync. Can anyone help me out? I'm very confused.
    Thanks

    Does the iPod connect to other networks?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4623 In the general settings on my ipod touch 2nd gen, I do not have an updates choice. Anybody know anything about this?

    In the general settings on my ipod touch 2nd gen, I do not have an update choice. Anyone know anything about this?

    An iPod Touch at iOS 3.1.3 and that iTunes states is up to date must be a 1st generation Touch, not 2nd.
    See http://support.apple.com/kb/HT1353#iPod_touch_2nd_generation  and notice the diffference between the 1st and 2nd gen models.

  • IPod Touch (2nd gen) not recognized by computer and iTunes

    When I connect my iPod Touch to my laptop, running Windows 7, neither the computer nor iTunes recognizes my iPod. Everything worked before with Vista.
    When I plug the iPod into the computer the iPod does turn on put the battery doesn't charge and the iPod does not show on the Device Manager.
    I have gone through and uninstalled and the reinstalled iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application support. With no positive result. In fact I have done it twice.
    In going back to make sure everything had installed I have noticed several things.
    The Apple Software Update, Bonjour, iTunes folders and Common Files are located in Program Files(x86) There are also copies of the Bonjour, iPod, Common Files, and iTunes folders are also located in the Program Files folder. Are these file locations correct?
    Also, I have read somewhere that there should be usbaapl.cab, usbaapl.inf, usbaapl.sys files. I can't find any of these file. Are these files necessary?
    Any help will be appreciated.

    greetings rkonrv and welcome to Apple discussions !
    it seems your have seen this KG then.
    maybe this tip by Beebopp (though a little off topic) will provide some pointers:
    +This solution is very similar to one above but worked for me. Am using iPod Touch 2nd Gen with 32 bit version of Windows Vista where the iTouch is being seen by Windows but does not show in iTunes. In my case it was being identified by Windows as a camera. I tried un-installing and re-installing iTunes and all the other Apple apps with no luck. Was almost ready to throw in the towel when I did one last search for alternate solutions and found the following instructions to reinstall the drivers, but instead of having the system look to the c:\Windows\inf or c:\windows\system 32 folders for the drivers, the path is changed to C:\program files\common files\Apple\Apple Mobile Support\Drivers, which is apparently where Vista installs the drivers. Once I changed the path the driver properly reflected the iTouch as a USB device, and not a digital camera. Try this if you are having similiar issues.+
    +Here are the steps:+
    +1. Verify you have the following files usbaapl.cat, usbaapl.inf & usbaapl.sys in the following directory "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"+
    +2. Log in using an ADMINISTRATIVE account+
    +3. Single left click on START+
    +4. Single left click on RUN (You may need to change the start menu to 'classic view' to see RUN, you can change back after if you like)+
    +5. Type in " devmgmt.msc " then hit Enter (Don't type in the quotes)+
    +6. Look for Imaging in the Device Manager window, and click on plus sign (In Vista you may not see the "Imaging" option. Look under "Portable Devices" as an alternative)+
    +7. Now you should see " Apple iPod " as a device underneath Imaging (or Portable Devices)+
    +8. Right click on " Apple iPod " then single left click on Properties+
    +9. Single left click on the " Driver " tab+
    +10. Single left click on " Update driver "+
    +11. Select " Install from a list or specific location " or "Browse my computer" whichever shows on your version of Vista+
    +12. Single left click on " Include this location in the search " if shown+
    +13. Paste " C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers " (Don't type in the quotes) into the box " Include this location in the search "+
    +14. Single left click NEXT and keep clicking through until " Apple iPod USB Driver " is detected, if no list appears then you should see the little animated circle thingie spinning. It's looking and working. Be patient.+
    +15. Hopefully you will get a successful message.+
    +16. The correct drivers(s) are now installed.+
    +17. Start up iTunes, and see if you iPod is detected again.+
    good luck !

  • Ipod touch (2nd gen) not connecting to itunes on mac air

    I have an old iPod touch (2nd gen) and want to sync it with my macbook air, but it will not show up on my mac or in iTunes. When connected it is charging so there is nothing wrong with the cable but i do not know why it is not showing up on the macbook.
    any suggestions on what it is and how to fix it will be greatly appreciated.

    iOS: Device not recognized in iTunes for Mac OS X
    - New cable and different USB port. Different conductors/contacts are used for charging and data
    - Try on another computer to help determine if computer or iPod problem

  • Will iPod touch 2nd gen work on iTunes 11

    I have a iPod touch 2nd gen and cannot get new songs off my iTunes 11. Does this mean I no longer can add songs to this device? Thanks for any advise in advance.

    iTunes 11 works fine for all model iPod.
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device and follow the instructions.

  • IPod touch 2nd gen will not open in iTunes. Ideas?

    I upgrading the latest version of iTunes and I went to sync my iPod touch 2nd gen to get my latest podcasts and it would not sync or even recognize in iTunes. My PC recognizes the drive. But iTunes is a no go. I suspected it was just the latest version of iTunes so I downgraded back to the previous version and got the same results. I've switched USB ports, cables and have restarted numerous times. I even uninstalled the device from the device manager but nothing is working. Any help would be greatly appreciated. Thanks!
    Garrey

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Getting error message, need help

    Hi there, at the moment I have the following query: select cust_no, cust_address, cust_phoneno from customer natural join (select cust_no from businesscust minus select cust_no from rental); This query outputs perfectly fine, with no errors. However,

  • Migrated my old pc to new mac air and can't find my files?

    Transferred hard drive using Apple migration software last night from old pc laptop to new 2013 Mac Air.  Having trouble locating my new files and sorting out where photos, music, docs, etc. need to go.  PLEASE Help!!! CMG.3

  • Display aspect ratio is off

    I have just loaded PS Elements 7 on a new computer - HP lAPTOP, Core 2 Duo, Vista Ultimate (64 Bit), 22" external monitor. Every image file I open does not display correctly - the aspect ratio is off. If the image size is 8-1/2" x 11", it displays as

  • DVD Playback flickers

    Since upgrading to 10.5 on my iMac Intel 2.0Ghz, DVD playback (at least of certain DVDs) seems to flicker - in both the DVD Player and Front row. It is almost as if the wrong frames overlap or something like that - there are strange 'ghosting' effect

  • How to improve performance of Blob.read()?

    I have a table with a Blob column. The average data length of the column is 1KB. When I read it out, the average time cost of Blob.read() is 15ms. Can I improve it more efficient? Thanks, Liu Jun