Ipod Touch 3.1.1 update won't start
Hi there,
I want to update my ipod touch from 3.0 to 3.1.1.
but i cant even start the update process.
It doesn't matter if I select "Just load update" or "load and install update.
I get the error code 504 after a second.
any ideas?
greetings bembi
Yes today I tried plugging in my ipod touch and there was a update available.
The 3.1.1 update and I had a problem with it also,it started to update and then it came up error code and ipod was frozen after it almost updated but up came a error code.
First I left usb cable for ipod still plugged in while I shut down computer.
second make sure you are using the usb cable without the dock and disconnect now.
Third turn computer back on and turn off your firewall and plug usb cable back into ipod then computer and do a restore when it shows on the itunes.It might read something like complete restore and hit yes.
It erases everything on ipod but after restore it should update to latest version and all your syn lists will work as normal.
Mine restored and update worked and synced everything as usual without losing any data.
You might have itunes to open when ipod touch is plugged in but if it doesnt just open itunes and your device should show and start the restore.
Similar Messages
-
My ipod worked until I purchased teh iOS 3.1.1 update from the apple store. Now my Ipod touch 1g will not even restore to the original iOs. How can I get it to update to the 3.1.1 version or restoer it. It worked fine prior to the update.
Just to give you an update, I got the iOS 3.1.3 installed (Even with the error messages 1602 & 1604). This is how I did it.
1. Turn off all spyware and antivirus
2. Open ITunes and purchase iOS and download (don't connect you ipod to the computer yet), don't select download and install. Close itunes after download.
3. My ipod was frozen with the connector and iTunes symbol in the screen, so I turned it off and with the usb plugged into the computer, hold the home button down (Puts it in recovery mode), now connect the end of the sync cord to the ipod, open iTunes and let it boot up. You should see the message that it found an ipod in recover and need to be restores. click ok and then select update.
4. This is where it will update and freeze again in restore. To continue update, leave the ipod connected (Don't touch it at all. Close iTunes and then reopen it. The connection should be made the the update should install.
It worked for me, maybe it will fro yo. -
My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hi. my ipod touch i guess finished updating. and now when it trys to turn on, a blue screen comes up and then the blue screen changes to a white one. and i cant do anything to it. also it own connect to itunes. help pls
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem -
IPod touch's screen remains blank, won't reset
During updating my iPod touch software to 3.1.3 today iTunes reported error no. 6 and my iPod touch went off.
I tried to start it or even reset it but it simply won't respond to anything.
The batteries were well charged when I began updating it.
Any ideas what to do now?hmm ...
just found in another thread on another forum:
+Hi, All,+
+It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
+Restart the device without connecting to your pc and+
+Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
+Best of luck.+
p.s.: here the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
edited by the Jolly Green Giant (where Green stands for environmentally friendly) -
Youtube videos will not play on Ipod touch 5 after ios update
YouTube videos will not play on my IPod touch 5 after I updated the operating software. Any suggestions on how to fix? I uninstalled and reinstalled the YouTube app.
What exactly happens when you try?
Apps crashing
See:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Contact the developer(Google)/go to their support site
Restore from backup. See:
iOS: How to back up -
HT4972 my ipod touch wont let me update IOS and becuase of that i cant download any apps
my ipod touch wont let me update IOS and becuase of that i cant download anything of the app world is there anyway of helping me
Do you have a 2G iPod. Those can only go to iOS 4.2.1.
A 1G can only go to 3.1.3
A 3G only to 5.1.1
Identifying iPod models
What version of iTunes is on the computer? The latest is 11
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?
Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
If still problem make an appointment at the Genius Bar of an Apple store. -
My Ipod touch was in an update and froze. It shows a blank screen and sometimes shows an apple. Now it will not restore. What do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?
Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod. -
Ipod touch 3gen failed to update and will no longer work
my ipod touch 3g tried to update but i failed and now my computer dosent reconize the ipod and the screen will not change
how can i fix it?
-
My ipod touch 2nd gen 8 gb won't boot! (I did hold home and power)
So my ipod touch 2nd gen 8 gb won't boot. It never really fell on the ground it was not jailbroken and I had it for almost a year. Yes I have googled it, yes I holded home and power button at the same time, basically did almost everything possible. I'm thinking it's the battery but might be something else. If you recognize this problem and know how to solve it, please reply here. I also can't connect to itunes in case your wondering
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I forgot the security answers on my Ipod Touch 5th generation and it won't let me downlaod ANYTHING fron itunes and it's REALLY REALLY frustarting!!!!!!!!!
Alternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
How to Manage your Apple ID: Manage My Apple ID -
My computer recognizes my ipod touch as a camera, but won't show up in itunes. How do I fix this problem so my ipod shows up in itunes again and I can continue to add music to my ipod?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
My ipod touch was trying to update and is now broken how do i fix it
My ipod touch was trying to update but wouldnt finish so i tryed restarting it, it is now frozen on a white screen, wont restart properly, and itunes wont read it. How do i fix it and whats wrong with it??
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How to connect airport time capsule to BT home hub 4
I am finding it difficult to connect my new airport time capsule (ATC) to the BT home hub 4. On opening the time machine it asks me to configure the time capsule before using. Should I be using the ATC as time machine only or should I be re-routing w
-
I cannot connect my external hard drives any longer. I have one WD "My Passport" used as a Time Capsule and one LaCie Porsche Design used for all different kind of data, formatted in exFAT. They worked fine, connected direct or through an additional
-
No Search Results page in Responsive HTML5 Output.
Hello, I am using RoboHelp HTML version 11.0.3 and have just finished my second help project, which I need to publish in Responsive HTML5 format. I had already published one project for some new software designed to run on iOS devices using the Respo
-
Hi all I am try to create multiple form on same page , I aligned all the region using grid alignment properties (create my own insert 's) everything works like a charm on desktop and smartphone but not on IPAD Region seem like cluttering into each ot
-
Do you have to explicitly open a file before Deny Access?
I tried running deny access after reading a file and when I tried to write to it, it gave me an error 8, a permission error. So I tried adding an explicit "Open", and it looks like that works. For this example: there's no error at the first error clu