IPOD TOUCH 3 DEVICE NOT RECOGNIZED BY XP,Connect IPOD TOUCH IN 3 PC, WINDOWS XP DEVICE APPEARS NOT RECOGNIZED, formatted the PC, reseted the IPOD AND NOTHING IN THE NOTEBOOK TRIED ANYTHING AND WINDOWS 7, SOMEBODY HELP ME PLEASE THANKS
http://www.facebook.com/profile.php?id=100002494047191&ref=tn_tnmnhttp://
If you tried other good cables then it appears that you have an iPod problem and an appointmnent at the Genius Bar of an Apple store is in order.
Similar Messages
-
I can't open the browser. I double click and nothing happens. I tried uninstalling and reinstalling but every time I do this it tells me I have to close Firefox first! I have restarted and then tried downloading to no avail b/c I get the same message.
Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.
-
I often use my iPhone to take video but the result is NTSC and I use PAL, how I can change? Can somebody help me? Thanks
My problem is when I transfer the movie on Final Cut for the assembly of the film, I know that I can convert with MPEG Streamclip but I would like to take my film directly on PAL. Is that possible? In the previous message I wasn't clear, I hope now I explained myself better. Thanks for help
-
okay I will turn my iPhone 4 off then hook it up to my dell laptop in it will turn on but it will not charge and my computer wont install it on my computer can somebody help me please
yes it will charge otherwise places with the apdotor but when I put the just the wire in my pc it will not work it wont even be recognized by the cumputer (I know its not the wire because its chargeing now in a outlet ) iam try to reset it in the cp and itunes will not recognize it in the link did not help either
-
hello..!!! i cant enter to iTunes store in my Windows 7 why??? somebody help me please :S
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now. -
I have a problem with my iphone 4S. I cant connect to wifi a week ago. Can somebody help me please?
I have tried everything but my iphone continue without connected.
Thanks.Hello.
My iphone doesn't recognize any signal wifi.
I have rebooted the red options as indicated on apple portal.
Also, I have turned off my iphone and when I turn it on don't enable the wifi option, and then I have to turn it off and turn it on again.
I have restored to the factory settings but the problem continues.
I don't know anything else to do.
Regards, -
My iphone 4s is not charging using wall charger. I can only charge it through my laptop and a desktop. I tried so many chargers already but it is still the same. Can somebody help me please...
My current ios is 6.1.3
I tried so many chargers thinking that my wall charger is defective. But still my phone is not charging. Its always through laptop and desktop only that i can do charging...help me please....
Thank youHello Regina0117
If you already try other chargers and still not working, the best advise is for you to contact apple support, if you still in warranty they will change it for you for free.
Start you case here:
http://www.apple.com/support/contact/
And contact apple support
Cheers, Lima -
I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?
No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.
-
Hey I have a movie that plays on AVI format but my laptop is not reading it. it says that is missing a codec and cannot be read. can somebody help me please
Luigi1990 wrote:
Hey I have a movie that plays on AVI format but my laptop is not reading it. it says that is missing a codec and cannot be read. can somebody help me please
Try installing VLC Player for Mac
http://www.videolan.org/vlc/download-macosx.html
Cheers
Pete -
can I put taks in my ical. They talk about a pin but I cannot find one on my application on my ipad and on my computer. Can somebody help me. Thanks.
re-post in the iMovie forum: https://discussions.apple.com/community/ilife/imovie. Good luck.
-
I want a solution to this problem
Dear apple ,
I recharge iTunes Gift Card for $ 25 and when I want to use and download the application from the store asked me to answer the secret question, but unfortunately forgot to answer confidential questions I ask you to help me please
thank youClick here for information. If the option to have the answers emailed to you isn't available or doesn't work(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section of that article.
Nobody on these boards can reset them for you.
(92282) -
I've been trying to download a song from iTunes and it kept on returning an error message err = 100000. Help me please.
Same problem for me. iTunes "support" emails with the same suggestion, over and over ... to check for available downloads. Hoping DigitalPR's friend will provide an answer. Apple wanted to charge me $50 for an hour of customer service. Amazing. Just me, or is the company already going downhill this shortly have Jobs has past away? Lion has tons of problems with wi-fi dropping. Now this.
-
I cant get my ipad 2 out of recovery. The apple icon stays on and nothing happens. I tried restoring it through Itunes but it comes up with a 3194 error code. I have the latest Itunes being 10.6.1.7 and the latest windows update.Can someone please help?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Can not run jcwde (Somebody help me please !)
Hi all, I'm a newbie in java card development.
Let's get to the point. I have some problem with jcwde and I've been searching for the similar problems in this forum such as : here here and here here
Other sources that I've referred to is : here and here
I'm trying to set environment variable for java card development.
Before running jcwde, i also run samples_build.bat but I don't know whether it OK or not.
When I try to run jcwde for testing demo file (I type : jcwde -jcwde.app in command prompt) the only message that i got is :
C:\java_card_kit-2_1_2\samples\src\demo>jcwde jcwde.app
'C:\Program' is not recognized as an internal or external command, operable program or batch files
Is there any problem with my enviromnent variables setting ? since I'm not sure how to fix it
here is mine :
JAVA_HOME : C:\Program Files\Java\jdk1.5.0_04
JC21_HOME : C:\java_card_kit-2_1_2
CLASSPATH : .;C:\java_card_kit-2_1_2\lib\api21.jar
PATH : C:\Program Files\Java\jdk1.5.0_04\bin;C:\java_card_kit-2_1_2\bin
Oh yeah, I almost forgotten that I'm using Windows XP Professional Edition SP 1, and Java Card Development Kit 2.1.2
Can somebody help me please or maybe give me advice about what I'm doing is right or wrong ?
Thanks in advance,
Best Regards,
iCH1
Edited by: ichiwan on Mar 12, 2008 10:00 PMdear kicklee,
Thank you for your response to the topic. By the way, do you mean that all CLASSPATH variable must not be more than 8 characters ?
I just did it, but still the same error occur.
Is there any solution for this ?
I need you to copy-paste all your succesfull CLASSPATH configuration here for better explanation.
thx in advance.
Best Regards,
iCH1
Edited by: ichiwan on Mar 18, 2008 8:09 AM
Edited by: ichiwan on Mar 18, 2008 8:13 AM
Edited by: ichiwan on Mar 18, 2008 8:15 AM -
Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?
It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)
Maybe you are looking for
-
Officejet 7000 freezes CMS Intellicad CAD software after printing.
I am using a HP Officejet 7000 A3 printer with ethernet connection to my XP workstation to print from CMA Intellicad CAD software. To print, I have to change the printer preferences to an A3 mono landscape shortcut in the printer setup. When the jo
-
Help - can't open .mpg file with Quicktime 7.3
Hi folks, Just tried to open a .mpg file of a recent santa visit for my little boys and Quicktime indicated it couldn't open it saying it wasn't a movie. I upgrade to Quicktime pro but that didn't solve the problem. Any thoughts as regards possible s
-
Firefox can't find the server at playfi.sh
every time that I try to click on a link for Playfish free gifts for apps that I play through Facebook or through an email to a link being offered by Playfish, I get the following message: Server not found Firefox can't find the server at playfi.sh.
-
Hi, Can anyone let me know how to invoke a pop up calender in CS? Thanks, Abhijit
-
Problem while activating sender business system
hi, when iam trying to activate my sender business system,iam getting the following error " Check Result for Object ECC6_BS SAP system ID EC6 and client 800 already exist in service | ec6_bs_sap". what would be teh problem ? Thanks . Mano