Ipod touch 3rd generation wont turn on or reset or connect to itunes! HELP!?

my ipod touch 3rd generation wont turn on. it wont reset or connect to itunes either and nothing i have tried so far has worked.

i am having the same issure and i did put it into recovery mode and itunes tells me to restore, but when i click restore it tells me that "software for this iphone is not currently available. make sure you have the latest version of itunes and try again" but it's obviously not an iphone.

Similar Messages

  • HT1353 My iPod touch 3rd generation wont turn on or charge

    My iPod touch 3rd generation wont turn on.. I plugged it in my laptop and desktop immediately, but nothings chage.. I also tried to open in iTunes but my iPod is not working.. What I am going to do now?? Help me please!

    Try:
    iOS: Not responding or does not turn on

  • My ipod touch 3rd gen wont turn on or charge and laptop couldnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? help please

    my ipod touch 3rd gen wont turn on or charge,laptop doesnt even detect it. no indication that its charging even in laptop no heat up at the back. how can i fix it? it happened after i plugged it in a socket then shows not supported with this accessory....help please.........thanks

    Try:
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • I have a ipod touch 3rd generation, I cant seem to get it connected to the internet, it connects to the router but not the internet ?? can any one help please?

    i recently got an ipod touch 3rd generation, i cannot seem to get it connected to the internet... it connects to the router but cannot seem to get connected to the internet, it seems to connect to the router for a very short while and then suddenly disconnect again, i have tried various solutions but cant seem to solve it, this seems to be a common problem as i have seen many complaints on other forums, many say it may be the dns server . please can any one help?

    Tap Settings / General / Reset / Reset Network Settings.
    See if that helps.
    If not try the iPod touch - Wi-Fi Troubleshooting Assistant.

  • I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?

    I have an ipod touch first generation and it is telling me to connect to itunes but it isn't recognized by itunes when i try to connect it. what do i do?

    Try disabling your security software and turning off the Firewall on your PC.
    Disable antivirus software
    Turn Windows Firewall on or off
    iOS: Device not recognized in iTunes for Windows  <--- definitely try the instructions for resetting the AMDS.

  • I have a new iPod touch that will not turn on, nor will it connect to iTunes.  Any suggestions?

    I have a new iPod touch that will not turn on, nor will it connect to iTunes.  Any suggestions?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipod touch 2nd generation wont turn on or show up on itunes or charge help!

    my ipod touch 2nd generation version 3.1.3. all o0f a sudden had stopped charging and will no longer show up in itunes.when i tried charging it that day it wouldnt charge and now its dead. i tried charging it back up and wont charge and when i try to turn it on it only shows the apple with black background and turns off again.any suggestions please text (574) 344-6625 or email [email protected] or [email protected]

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          
    Also:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch 4th generation wont turn on

    Ok my Ipod 4th generation wont turn on at all ive tried holding the buttons connecting it to Itunes (which by the way says nothings connected) and nothing is happening at all. My battery was halfway charged and after I put my ipod to sleep it wouldnt turn on anymore. Can anybody help me please?

    Try putting it in DFU mode. Here is how to put it in dfu mode:
    1. First, Open up iTunes, plug in your iPod Touch/iPhone to the CPU's USB port. Turn on your CPU's speaker and make sure it is loud enough that you can hear it.
    2. Hold down the Home button (top left for iPod Touch and top right for the iPhone with the screen facing you) and the Power button (located on the front bottom of your iPod Touch/iPhone) simutaneously, until the screen goes black and the device turns off. (past the red slider/slide to power off screen)
    3. Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
    4. After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device, now iTunes should recognize it in DFU mode.
    5. After iTunes recognizes the iPod Touch/iPhone, let go of the Home button otherwise it will go into recovery mode and you will have to do the entire DFU process over again.
    6. You will know when you have put your iPod Touch/iPhone correctly into DFU mode when the display is blank and that you do not have anything on your device.
    And you are done, now you can install any iPod Touch/iPhone firmware on to your device via the iTunes SHIFT recovery method.

  • Ipod Touch (1st generation) wont turn on or connect to itunes!

    Hi, I have had my Ipod Touch 1st Generation for years now and i am trying to turn it on and sync it but nothing works! The apple sign just pops up then it turns itself off again. HELP!!

    Try here:
    iOS: Not responding or does not turn on

  • My ipod touch fifth generation wont turn on after the battery died and my home button is broken

    i fell asleep with my ipod touch fifth generation on and when i woke up the battery had died but i tried turning it on and connecting it to the computer but nothings working

    Hi stephkayy223,
    Thanks for visiting Apple Support Communities.
    If your iPod touch battery has been completely consumed, you may need to connect it to power for several minutes before you will see the charging screen:
    If you see this screen, it means your battery is really low. Plug in your device and let it charge for at least 10 minutes before using it. After that, you can use your device while it continues to charge.
    If your device has turned off, you might see a black screen for a few minutes even after you plug it in. Let it charge until it turns on, or until it's fully charged.
    From:
    Charge your iPhone and iPod touch
    If your iPod touch still does not seem to be charging, the steps in this article can help troubleshoot the device:
    If you can’t charge your iPhone, iPad, or iPod touch
    Best Regards,
    Jeremy

  • IPod Touch 2nd Generation wont turn on or be recognized by iTunes.

    The other night i was using my iPod touch and it was working fine and then i put it to sleep for the night and i woke up and tried to wake up my ipod and the screen displayed the plug into iTunes thing and the screen was flickering lighter and darker. I went to plug it into my computer and my computer didnt recognize it and neither did iTunes. I tried turning it off and back on but after i turned it off it didn't turn back on. I tried putting it into recovery mode and any other mode I could find that was supposed to fix it and it didn't work. I also tried charging it with no effect. So now my iPod wont turn on and when i plug it into the computer it tells me that the USB Device is not recognized. I followed the steps here: http://support.apple.com/kb/ts1538
    which told me to update the driver for the unknown device. I followed those instructions and i went to install driver from disk and have disk and put in the location it told me to select and the driver it told me to select and after i did that the computer told me that the driver update didn't go with the driver i was updating. So that didn't worked and after hours of much frustration im here. The liquid identifier thing has not been triggered and i no longer have a warranty on my Ipod so if anyone can help it'd greatly appreciate it!

    Anyone?

  • Ipod touch 2nd generation wont turn on or charge

    Hello I have an Ipod Touch 2nd Gen and it wont turn on or charge. I have pluged it into a wall 4 days ago and its been charging in multiple outlets (such as computers and walls) and its been displaying a red battery with a lightning symbol. When I unplug it the screen goes black and nothing happens. I have tried holding down the power button but nothing will work. Also when I plug it into a computer it doesnt show up on itunes, as additional info it is a 8gb black ipod touch 2ng gen, no camera, and ios 4.1. Thank you

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          
    Also:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • I have an ipod touch 4th generation with a broken digitizer. can it connect to itunes?

    i have an ipod touch with a broken digitizer. can it still connect to itunes?

    See
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                                                                                                                                  
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My ipod touch 4th generation is disabled and needs to be connected to itunes. I did that now what?

    Hi,
    My password was entered in wrong too many times and now my ipod is disabled.  It said to connect to itunes so that is what i did but it said that i need to put my password on my ipod. What do i do? Can you please help me?

    Before rettoring you need to place the iPod in recover ymode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • My iPod Touch 3rd generation wont start back up after turning it off

    It all started when I was downloading an update for my twitter app and when it got to "Installing..." it got stuck like that for a while so I turned the ipod off (holding the power button off) and turned it back on. So when I tried to turn it on, it gives me the Apple logo for a while then it gets the "loading sign" stuck. After 5 minutes stuck or so with the loading sign, it turns off by itself and turns back again with the Apple logo. Updating an app and getting stuck has happen to me before and it worked well turning the iPod off completley and turning it on again. And funny thing its always the Echofon Twitter App that always gets stuck when updating.
    I tried connecting the iPod to my laptop and opening iTunes but when the iPod gets turned off, on the itunes it gaves me a sign that says "Ipod cannot be found. It is not sync..."
    So i need help turning on my iPod back on.
    - I've never jailbroken the iPod
    - Home Button does not work

    Try:
    - iOS: Not responding or does not turn on
    Where it says use recovery mode, use one of these programs to place the iPod in recovery mode
    The Firmware Umbrella - TinyUmbrella
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Best way to determine what objects has been selected in a Collection?

    Hi all I´m currently developing an application where a user can create a PDF based on the choices made from multiple collections. Each collection contatins 10-50 items, and there are about 8 different collections with objects. Checkboxes are used to

  • Reg:Receiver FCC

    Hi ..    Can you plese help in writing the Conversion Parameters for the below structure.. <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_FCC xmlns:ns0="http://krft.com/FCC">    <Header>       <Name/>       <No/>       <Location/>    </Header>    <Da

  • How do I manage Video Ram size

    Hello, I would like to ask how do I adjust the size of video ram in OSX and windowsXP. I have read someone's post saying that it is not user changeable in OSX. if it is not changeable, when will it changeable to a larger size? How about in windowsXP?

  • Windows 7 64 bit Audio issues

    I recently installed Windows 7 64 on my Macbook Pro 5.5 (according to windows 7 system information). I have been trying to get the audio to work correctly for about 2 weeks now with no luck. I am only getting about 50% of what I should. I have tried

  • 10g Preview: Deep Package Names

    It appears that you can't add classes with package names longer than 6 nodes into a 10g project. I just so happen to have some classes that have a package name which is 7 levels deep. I couldn't add it to my project via the navigator. I played around